Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 24 Aug 2005 08:30:40 -0500
From:      Dan Olson <danolson@visi.com>
To:        Brad Schonhorst <bschonhorst@vcsnyc.org>
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: kismet and atheros
Message-ID:  <430C7680.3060009@visi.com>
In-Reply-To: <56287.168.100.249.178.1124853510.squirrel@www.geekisp.com>
References:  <56287.168.100.249.178.1124853510.squirrel@www.geekisp.com>

next in thread | previous in thread | raw e-mail | index | archive | help


Brad Schonhorst wrote:
> I have been using an iBook since OS X came about but recently decided it
> was time to give BSD a try.  I picked up a new TINY Fujitsu P7010 and now
> have it running FreeBSD 6 - current circa July
> 
> Wireless support was obviously a must for the laptop ( hence running
> CURRENT to get support for my Atheros card. )  As someone new to BSD
> wireless I was wondering if you guys could share with me some of your
> favorite tools for wireless use.  I have been somewhat frustrated with the
> steps I currently take to discover new wireless access points.
> 
> To get wireless access:
> 
> 1) Run Kismet, find some SSIDs that are open
> 2) Reboot!  I can't seem to get my card out of Promisc mode otherwise
> 3) run ifconfig ath0 ssid = ENTERNAME (other commands as needed)
> 4) run dhclient
> 
> Are there any other options, I'd like to avoid rebooting after running
> Kismet.  I feel like I must be missing something.  ifconfig destroy won't
> work for some reason, I'm guessing its because the entry comes from Kismet
> rather than the ifconfig create command.  Any other tools to see what
> access points are floating around out there?
> 
> I understand the bsd airtools contains dstumbler but it won't work with
> the Atheros chipset.  Curious though, do you need to reboot after using
> dstumbler?
> 
> I've configured the kernel with ath_rate_onoe, using ATHEROS 5212 Super AG
> card.
> 
> -brad

I had this problem with Kismet. An upgrade solved it. I now run 6 Beta2 
from Aug 17.

Dan





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?430C7680.3060009>