Date: Mon, 28 Nov 2005 09:08:51 +0100 From: Larkine <larkine@gmail.com> To: freebsd-acpi@freebsd.org Subject: Acer Aspire 3002WLMI - ACPI Message-ID: <438ABB13.80207@gmail.com>
next in thread | raw e-mail | index | archive | help
Hello, I have a Aspire 3002WLMI laptop. I got the following page fault after updating my BIOS. I have FreeBSD 6.0 installed. The problem is the same with 5.4. Here is some info: % Bios release % ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- http://larkine.org/freebsd/acer_Aspire3002WLMI_BIOS_3A26.txt % Here the dmesg: % ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #11: Sun Nov 27 23:01:11 CET 2005 root@larkine:/usr/src/sys/i386/compile/ELIPSE ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.07-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x10fc0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xc2500800<SYSCALL,NX,MMX+,<b25>,3DNow+,3DNow> real memory = 468647936 (446 MB) avail memory = 453402624 (432 MB) ACPI: Overriding _OS definition with "Windows 2001.1" MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 acpi0: Power Button (fixed) unknown: I/O range not supported acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 7 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 4 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 9 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 760 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <simple comms, generic modem> at device 2.6 (no driver attached) pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xe2002000-0xe2002fff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe2003000-0xe2003fff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2004000-0xe2004fff irq 23 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered sis0: <SiS 900 10/100BaseTX> port 0x1800-0x18ff mem 0xe2005000-0xe2005fff irq 19 at device 4.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:c0:9f:a4:d2:f0 cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci0: <network> at device 11.0 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xe3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 Timecounter "TSC" frequency 1600065180 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100 Trying to mount root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted ndis0: <Broadcom 802.11g Network Adapter> mem 0xe2000000-0xe2001fff irq 17 at device 11.0 on pci0 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:0e:9b:d3:b5:7e ndis0: link state changed to UP ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND SearchNode 0xc1499540 StartNode 0xc1499540 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1499440), AE_NOT_FOUND umass0: USB Flash Disk, rev 2.00/2.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB Flash Disk 2.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) % Here the result after compiling asl file: % ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Intel ACPI Component Architecture ASL Optimizing Compiler / AML Disassembler version 20041119 [Nov 3 2005] Copyright (C) 2000 - 2004 Intel Corporation Supports ACPI Specification Revision 2.0c regnier_Aspire3002WLMI.asl 3064: Z007, Error 1022 - ^ Object does not exist (Z007) regnier_Aspire3002WLMI.asl 3065: Z007, Error 1022 - ^ Object does not exist (Z007) regnier_Aspire3002WLMI.asl 3441: Method (_WAK, 1, NotSerialized) Warning 2026 - ^ Reserved method must return a value (_WAK) ASL Input: regnier_Aspire3002WLMI.asl - 3559 lines, 119584 bytes, 1568 keywords Compilation complete. 2 Errors, 1 Warnings, 0 Remarks, 539 Optimizations % Here the asl file at: % ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- http://larkine.org/freebsd/regnier_Aspire3002WLMI.asl ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Regards, Oliver.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?438ABB13.80207>