Date: Mon, 03 Apr 2006 12:56:57 +0900 From: Ganbold <ganbold@micom.mng.net> To: Matthew Jacob <lydianconcepts@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: boot problem in HP Proliant ML370 G4 Message-ID: <44309D09.9040503@micom.mng.net> In-Reply-To: <7579f7fb0603312322y46d87807t2e13af72bae45d96@mail.gmail.com> References: <442BBDED.4060804@micom.mng.net> <7579f7fb0603312322y46d87807t2e13af72bae45d96@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE.
Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors:
255H 63S/T 17849C)" line and continues.
I will try to upgrade again to 6.1-PRERELEASE later today. I did before
and the problem still was there.
dmesg.boot:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
MPTable: <HP PROLIANT >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
Hyperthreading: 2 logical CPUs
real memory = 1073688576 (1023 MB)
avail memory = 1041793024 (993 MB)
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP P50> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 3 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 3 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <MPTable PCI-PCI bridge> at device 2.0 on pci0
pci2: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem
0xfdee0000-0xfdefffff,0xfdec0000-0xfdedffff irq 31 at device 3.0
on pci3
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x4400-0x44ff mem
0xfdea0000-0xfdebffff,0xfde80000-0xfde9ffff irq 27 at device 3.1
on pci3
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.14.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci2
pci7: <PCI bus> on pcib3
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1100> mem
0xfdff0000-0xfdffffff irq 49 at device 3.0 on pci7
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:14:c2:60:1e:fc
pcib4: <MPTable PCI-PCI bridge> at device 4.0 on pci0
pci11: <PCI bus> on pcib4
pcib5: <MPTable PCI-PCI bridge> at device 5.0 on pci0
pci14: <PCI bus> on pcib5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f
irq 9 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f
irq 9 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f
irq 9 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f
irq 9 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbef0000-0xfbef03ff irq
9 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib6
pci1: <display, VGA> at device 3.0 (no driver attached)
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77d irq
7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3200124448 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <HL-DT-ST CD-ROM GCR-8486B/2.00> at ata0-master UDMA33
da0 at mpt0 bus 0 target 0 lun 0
da0: <COMPAQ BD1468A4B5 HPB8> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
Trying to mount root from ufs:/dev/da0s1a
pciconf -lv:
hostb0@pci0:0:0: class=0x060000 card=0x32000e11 chip=0x35908086
rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Server Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port A0'
class = bridge
subclass = PCI-PCI
pcib4@pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B0'
class = bridge
subclass = PCI-PCI
pcib5@pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B1'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x32010e11 chip=0x24d28086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x32010e11 chip=0x24d48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x32010e11 chip=0x24d78086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'
class = serial bus
subclass = USB
uhci3@pci0:29:3: class=0x0c0300 card=0x32010e11 chip=0x24de8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'
class = serial bus
subclass = USB
ehci0@pci0:29:7: class=0x0c0320 card=0x32010e11 chip=0x24dd8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib6@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB
Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x32010e11 chip=0x24db8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
pcib2@pci2:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09
hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge A'
class = bridge
subclass = PCI-PCI
pcib3@pci2:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09
hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge B'
class = bridge
subclass = PCI-PCI
mpt0@pci3:3:0: class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
mpt1@pci3:3:1: class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
bge0@pci7:3:0: class=0x020000 card=0x00cb0e11 chip=0x16c714e4 rev=0x10
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5703A3 NetXtreme Gigabit Ethernet'
class = network
subclass = ethernet
none0@pci1:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Rage XL PCI'
class = display
subclass = VGA
none1@pci1:4:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01
hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'iLo Integrated Lights Out Processor'
class = base peripheral
none2@pci1:4:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01
hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'iLo Integrated Lights Out Processor'
class = base peripheral
Ganbold
Matthew Jacob wrote:
> insufficient info
>
> On 3/30/06, Ganbold <ganbold@micom.mng.net> wrote:
>
>> Hi,
>>
>> I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4.
>> The problem is "-" appears on the screen and it never boots unless
>> somebody hits the
>> "Enter" key. Sometimes even PS2 keyboard doesn't respond during that
>> time. Tried with
>> USB keyboard, same problem.
>>
>> The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic
>> (mpt-5.0.5.20.00 bios) LSI1030-IT controller and one Compaq BD1468A4B5
>> 146GB SCSI disk.
>>
>> It didn't even boot with WITNESS and INVARIANTS options, scrolls very
>> fast and forever showing some SCSI stuffs.
>>
>> How to solve this problem? Does anybody have this kind of issues before?
>>
>> thanks,
>>
>> Ganbold
>>
>> _______________________________________________
>> freebsd-stable@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>>
>>
>
>
>
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44309D09.9040503>