Date: Fri, 21 Jul 2006 18:36:10 -0400 From: Rich Demanowski <richd@RichDPhoto.com> To: Derrick Ryalls <ryallsd@gmail.com> Cc: freeBSD <freebsd-questions@freebsd.org> Subject: Re: Enabling sound? Message-ID: <44C156DA.5060701@RichDPhoto.com> In-Reply-To: <d5eb95fc0607211526h7ac4f642qce1903a616ab4527@mail.gmail.com> References: <44C14EEB.5030901@RichDPhoto.com> <d5eb95fc0607211526h7ac4f642qce1903a616ab4527@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Derrick Ryalls wrote: > On 7/21/06, Rich Demanowski <richd@richdphoto.com> wrote: >> I just dropped a SoundBlaster Live! card into my box, and have followed >> the directions in the handbook and the man pages. >> >> The following lines are in the compiled kernel: >> device sound >> device snd_emu10k1 >> >> I don't get the pcm0 lines that section 7.2.2 in the manual talks >> about. cat /dev/sndstat returns: >> FreeBSD Audio Driver (newpcm) >> Installed devices: >> and nothing else. >> >> kldload snd_emu10k1 yields no output whatsoever. When followed by cat >> /dev/sndstat it produces the same outputs as above. >> >> kld_load snd_driver yields: >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0x20 >> sio1: port may not be enabled >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> ppc0: parallel port not found. >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> >> I recompiled with the sound and emu10k1 drivers commented out, and the >> kldload and cat /dev/sndstat commands still yield the same. >> >> I need to get sound enabled on this box, so I can do some online >> training provided through streaming video. Please, please, please tell >> me I don't have to break down and install wankers on this thing ... >> > > I would try this: > > kldload snd_driver > > then cat /dev/sndstat to see if perhaps a different driver is needed. I tried that. That's what got me all the ppc0 and sio1 errors.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44C156DA.5060701>