Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Aug 2006 06:35:04 -0500
From:      Eric Anderson <anderson@centtech.com>
To:        Geoff Buckingham <geoffb@chuggalug.clues.com>
Cc:        freebsd-scsi@freebsd.org
Subject:   Re: isp issues on recent -STABLE
Message-ID:  <44E05FE8.3060800@centtech.com>
In-Reply-To: <20060814085936.GB58022@chuggalug.clues.com>
References:  <44DB8A9C.8090609@centtech.com> <44DC6F9F.4060405@centtech.com>	<20060811154348.GA83765@chuggalug.clues.com>	<44DCA9F1.1000302@centtech.com>	<7579f7fb0608121101g112e006cy1112d282fab753d3@mail.gmail.com>	<20060814080857.GA58022@chuggalug.clues.com> <20060814085936.GB58022@chuggalug.clues.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 08/14/06 03:59, Geoff Buckingham wrote:
>>>> I have this one host connected to a single QLogic fiber channel switch,
>>>> which has 5 ACNC fiber channel arrays attached to it, along with a tape
>>>> robot and tape drives.  Three of the arrays present 3 LUNs each (2TB per
>>>> LUN), and two of them present 2 LUNs each, 4GB and 10TB - I'm not using
>>>> these two arrays much yet, and are not really associated with the problems.
>>>>
> Curiosity just lead me to the acnc website. The html data-sheets suggest
> the arrays support 253 commands, the PDFs 255! It also reads to me as if
> this is per FC port not per LUN. You will presumably have better 
> informaton with whatever documentation these devices shipped with. 


*sigh* - I was going by what I was told on the phone by one of their 
support people.  I trust the lowest number :)

I see that now too.  I'll try setting that lower (80 should be good for 
each of the three LUNs per array).

Thanks everyone for the hints/help - I'll report back once I know if 
that made any difference.

Eric


-- 
------------------------------------------------------------------------
Eric Anderson        Sr. Systems Administrator        Centaur Technology
Anything that works is better than anything that doesn't.
------------------------------------------------------------------------



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44E05FE8.3060800>