Date: Mon, 05 Nov 2012 15:19:43 -0800 From: "Ronald F. Guilmette" <rfg@tristatelogic.com> To: freebsd-x11@freebsd.org Subject: Re: WITH_NEW_XORG=yes -- failure Message-ID: <46587.1352157583@tristatelogic.com> In-Reply-To: <509843EF.2070008@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <509843EF.2070008@gmail.com>, matt <sendtomatt@gmail.com> wrote: >Try hand writing your xorg.conf (or using an old one, or using none at >all)... OK. I can fetch a previous known-working xorg.conf and I can (and will) try that, however... Isn't all of this NEW_XORG stuff eventually supposed to be become the new "official" xorg stuff for FreeBSD? If so, is anybody going to work on fixing this, which appears to be a quite serious bug? >WITH_NEW_XORG does apparently use some new methods to probe for >video, but in this case it sounds like X -configure is getting confused >by a video controller you don't use or there is some other issue probing >one device. It would seem so. For the record, the machine in question has motherboard MSI K9VGM-V, which is a micro-ATX with on-board integrated VIA K8M890CE graphics, *and* also I have an ATI X600 PCIe board installed. I do use the latter. I do not use the former. >The error message is vague, Yes. It is. >it's hard to tell if it's say a >device issue or an edid issue (for example) because it doesn't imply >whether screens are more numerous or devices. I only have one monitor, and it is plugged in to the X600 card (via DVI). Perhaps X is unhappy that I have nothing plugged into the on-board graphics. >You could try removing all >drivers except the ones you intend to use as well. Well, I'll see how things go with the xorg.conf file that I was using on this machine before.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46587.1352157583>