Date: Sun, 24 Jun 2007 11:31:40 +0300 From: Artyom Viklenko <artem@aws-net.org.ua> To: Jim Stapleton <stapleton.41@gmail.com> Cc: freebsd-net@freebsd.org Subject: Re: ppp/peers/* files Message-ID: <467E2BEC.80305@aws-net.org.ua> In-Reply-To: <80f4f2b20706231120u6b6f2659xa427b7a54f20b243@mail.gmail.com> References: <80f4f2b20706230440n5abeceb6n6d94eef41f776265@mail.gmail.com> <467D1700.8050006@aws-net.org.ua> <80f4f2b20706231120u6b6f2659xa427b7a54f20b243@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Jim Stapleton wrote:
> I can't find a way to specify mppe-128 for either pptp or pppd in the
> man files, and every doc I see (including the man pages examples,
> which don't work when I specify it in the file) seem to suggest that I
> use either "mppe-128" or "require-mppe-128" for pppd, neither of which
> work. Any suggestions?
As far as I know, pppd in FreeBSD does not support natively mppc and
needs patches. (Maybe this functionality provided by pptp.)
But MPD does! And it support it using in-kernel netgraph subsystem.
So, I suggest to install mpd and set it up to connect to your Windows
VPN server.
Your configs may look like this.
mpd.conf file:
default:
load pptp0
pptp0:
new -i ng0 pptp0 pptp0
set bundle enable compression
set bundle disable multilink
set bundle authname "your-username"
set bundle password "your-password"
set iface disable on-demand
set iface idle 0
set iface mtu 1460
set iface route default
set link yes acfcomp protocomp
set link disable pap
set link accept chap-md5 chap-msv1 chap-msv2 chap
set link enable no-orig-auth
set link mtu 1460
set link mru 1460
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set ccp yes mppc
set ccp yes mpp-e40
set ccp yes mpp-e56
set ccp yes mpp-e128
set ccp yes mpp-stateless
set pptp peer <ip-of-your-vpn-server>
set pptp disable incoming
set pptp enable originate out-call
set pptp disable windowing
set pptp disable delayed-ack
open iface
mpd.links file:
pptp0:
set link type pptp
Also make shure you have loaded (or compiled in kernel):
ng_bpf.ko
netgraph.ko
ng_ether.ko
ng_iface.ko
ng_ksocket.ko
ng_mppc.ko
rc4.ko
ng_netflow.ko
ng_ppp.ko
ng_pptpgre.ko
ng_socket.ko
ng_tee.ko
ng_vjc.ko
ng_tty.ko
ng_async.ko
Hope this helps.
--
Sincerely yours,
Artyom Viklenko.
-------------------------------------------------------
artem@aws-net.org.ua | http://www.aws-net.org.ua/~artem
FreeBSD: The Power to Serve - http://www.freebsd.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?467E2BEC.80305>