Date: Wed, 27 Jun 2007 10:16:46 +0200 From: Richard Walter <Richard.Walter@hob.de> To: Marcel Moolenaar <xcllnt@mac.com> Cc: freebsd-ia64@freebsd.org Subject: Re: Install problem HP integrity rx2660(Montecito) Message-ID: <46821CEE.9060203@hob.de> In-Reply-To: <43EBC9F9-9665-412C-9236-6913673EFE19@mac.com> References: <461357FF.1060505@hob.de> <FFBC286D-78B2-4368-903B-2D8DA755FA4E@mac.com> <461492A3.9@hob.de> <46152B18.2000504@hp.com> <92E5D9E5-4F6A-426D-93F7-2B14AF39CD38@mac.com> <46153842.7050306@hp.com> <713E07DF-2785-4738-83A5-FBBC503E49FB@mac.com> <463B0AB3.4010102@hob.de> <93AE228A-5E2A-4485-855C-DD2F09E09E89@mac.com> <43EBC9F9-9665-412C-9236-6913673EFE19@mac.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello,
i've tried to boot with the June snapshot, but after the output (follows)
the machine reboots. I've tried to attach a "boot -v" too.
#################
Searching for devices
Broadcom NetXtreme Gigabit Ethernet (BCM5704) is detected (PCI-X)
Broadcom NetXtreme Gigabit Ethernet (BCM5704) is detected (PCI-X)
Starting: Internal Bootable DVD
Consoles: EFI console
Image base: 0x00000100fef79000
FreeBSD/ia64 EFI boot, Revision 1.2
(root@pluto1.freebsd.org, Sun Jun 10 20:32:19 UTC 2007)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x9bf018 data=0xa7e88+0xca1f0 syms=[0x8+0x77bb0+0x8+0x674db]
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xe000000004068000...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200706 #0: Mon Jun 11 06:44:36 UTC 2007
root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Montecito (1594.71-Mhz Itanium 2)
Origin = "GenuineIntel" Revision = 7
Features = 0x5<LB,AO>
real memory = 8554143744 (8157 MB)
avail memory = 8095539200 (7720 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000100ffd18050
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0: SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu2: SAPIC Id=2, SAPIC Eid=0
Security auditing service present
BSM auditing present
acpi0: <HP> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5d8004-0xff5d8007 on acpi0
cpu0: <ACPI CPU> on acpi0
device_attach: acpi_perf0 attach returned 6
device_attach: acpi_perf0 attach returned 6
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 1.0 (no driver attached)
pci0: <simple comms> at device 1.1 (no driver attached)
uart0: <Non-standard ns8250 class UART with FIFOs> mem 0x88033000-0x88033fff irq 16 at
device 1.2 on pci0
uart0: [FILTER]
uart0: console (9600,n,8,1)
ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2
on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 5 ports with 5 removable, self powered
umass0: <HEWLETT PACKARD INTEGRITY SERVER, class 0/0, rev 2.00/0.a1, addr 2> on uhub2
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem
0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem
0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
pci1:2:0: bad VPD cksum, remain 249
bge0: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x2100> mem
0xa0450000-0xa045ffff irq 29 at device 2.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:17:a4:99:ad:bb
bge0: [ITHREAD]
pci1:2:1: bad VPD cksum, remain 249
bge1: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x2100> mem
0xa0440000-0xa044ffff irq 30 at device 2.1 on pci1
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:17:a4:99:ad:ba
bge1: [ITHREAD]
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
uart1: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 24 on acpi0
uart1: [FILTER]
uart1: debug port (9600,n,8,1)
uhub0: port 1, set config at addr 2 failed
uhub0: device problem (INVAL), disabling port 1
uhub0: port 3, set config at addr 2 failed
uhub0: device problem (INVAL), disabling port 3
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004c13118
##################
boot -v
OK boot -v
Entering /boot/kernel/kernel at 0xe000000004068000...
PAL Proc at 0xe00000003f800010
SAL Proc at 0xe00000003ff9eae0, GP at 0xe00000003fe00000
SAL: AP wake-up vector: 0xff
Platform clock frequency 266117219 Hz
Processor ratio 1600/267, Bus ratio 1/1, ITC ratio 6/4
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 24 Region ID bits
Trying VHPT size 0x2000000
Putting VHPT at 0x6000000
Splitting [0x5414000-0x3e862000]
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200706 #0: Mon Jun 11 06:44:36 UTC 2007
root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Using 32 colors for the VM-PQ tuning (0, 0)
UNWIND: table added: base=e000000004000000, start=e0000000049886a0, end=e0000000049bf018
Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000005413120.
Preloaded mfs_root "/boot/mfsroot" at 0xe000000005413200.
CPU: Montecito (1594.71-Mhz Itanium 2)
Origin = "GenuineIntel" Revision = 7
Features = 0x5<LB,AO>
real memory = 8554143744 (8157 MB)
Physical memory chunk(s):
0x12000000 - 0x3e861fff, 746987520 bytes (91185 pages)
0x3fc00000 - 0x3fdd5fff, 1925120 bytes (235 pages)
0x100000000 - 0x1f8c53fff, 4173676544 bytes (509482 pages)
0x10040000000 - 0x100feef7fff, 3203366912 bytes (391036 pages)
0x100ff000000 - 0x100ff051fff, 335872 bytes (41 pages)
0x100ff802000 - 0x100ff8a7fff, 679936 bytes (83 pages)
0x100ffa00000 - 0x100ffc89fff, 2662400 bytes (325 pages)
0x100ffe00000 - 0x100ffe3ffff, 262144 bytes (32 pages)
0x100ffe80000 - 0x100fffd1fff, 1384448 bytes (169 pages)
avail memory = 8095539200 (7720 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000100ffd18050
Table 'FACP' at 0xe00000003fdf6af8
Table 'SPCR' at 0xe00000003fdf6c30
Table 'DBGP' at 0xe00000003fdf6c80
Table 'APIC' at 0xe00000003fdf70a0
Local APIC address=0xfee00000
Local APIC override entry
Local APIC address=0xfee00000
Local SAPIC entry
ProcessorId=0x0, Id=0x0, Eid=0x0
Local SAPIC entry
ProcessorId=0x1, Id=0x1, Eid=0x0 (disabled)
Local SAPIC entry
ProcessorId=0x2, Id=0x2, Eid=0x0
Local SAPIC entry
ProcessorId=0x3, Id=0x3, Eid=0x0 (disabled)
Local SAPIC entry
ProcessorId=0x4, Id=0x4, Eid=0x0
Local SAPIC entry
ProcessorId=0x5, Id=0x5, Eid=0x0 (disabled)
Local SAPIC entry
ProcessorId=0x6, Id=0x6, Eid=0x0
Local SAPIC entry
ProcessorId=0x7, Id=0x7, Eid=0x0 (disabled)
I/O SAPIC entry
Id=0x0, InterruptBase=0x10, Address=0xfed20800
I/O SAPIC entry
Id=0x2, InterruptBase=0x1b, Address=0xfed24800
I/O SAPIC entry
Id=0x3, InterruptBase=0x26, Address=0xfed26800
I/O SAPIC entry
Id=0x6, InterruptBase=0x31, Address=0xfed2c800
I/O SAPIC entry
Id=0x7, InterruptBase=0x3c, Address=0xfed2e800
Table 'SPMI' at 0xe00000003fdf6cb8
Table 'CPEP' at 0xe00000003fdf6f70
Table 'SSDT' at 0xe00000003fdf3fc8
Table 'SSDT' at 0xe00000003fdf4488
Table 'SSDT' at 0xe00000003fdf48e8
Table 'SSDT' at 0xe00000003fdf5158
Table 'SSDT' at 0xe00000003fdf59c8
Table 'SSDT' at 0xe00000003fdf6238
Table 'SSDT' at 0xe00000003fdf6378
Table 'SSDT' at 0xe00000003fdf6468
Table 'SSDT' at 0xe00000003fdf65a8
Table 'SSDT' at 0xe00000003fdf6698
Table 'SSDT' at 0xe00000003fdf67d8
Table 'SSDT' at 0xe00000003fdf68c8
Table 'SSDT' at 0xe00000003fdf6a08
Table 'WDAT' at 0xe00000003fdf6da8
SMP: waking up cpu2
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0: SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu2: SAPIC Id=2, SAPIC Eid=0
Security auditing service present
BSM auditing present
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
ACPI: RSDP @ 0x0x3fde6000/0x0028 (v 2 HP)
ACPI: XSDT @ 0x0x3fde602c/0x00C4 (v 1 HP rx2660 0x00000000 HP 0x00000000)
ACPI: FACP @ 0x0x3fdf6af8/0x00F4 (v 3 HP rx2660 0x00000000 HP 0x00000000)
ACPI: DSDT @ 0x0x3fde61c8/0xDDF1 (v 1 HP rx2660 0x00000007 INTL 0x20050309)
ACPI: FACS @ 0x0x3fdf6bf0/0x0040
ACPI: SPCR @ 0x0x3fdf6c30/0x0050 (v 1 HP 0x00000000 HP 0x00000000)
ACPI: DBGP @ 0x0x3fdf6c80/0x0034 (v 1 HP rx2660 0x00000000 HP 0x00000000)
ACPI: APIC @ 0x0x3fdf70a0/0x00E8 (v 1 HP rx2660 0x00000000 HP 0x00000000)
ACPI: SPMI @ 0x0x3fdf6cb8/0x0050 (v 4 HP rx2660 0x00000000 HP 0x00000000)
ACPI: CPEP @ 0x0x3fdf6f70/0x0034 (v 1 HP rx2660 0x00000000 HP 0x00000000)
ACPI: SSDT @ 0x0x3fdf3fc8/0x04B3 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf4488/0x0457 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf48e8/0x0866 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf5158/0x0866 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf59c8/0x0866 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf6238/0x0138 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf6378/0x00E0 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf6468/0x013C (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf65a8/0x00E0 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf6698/0x013C (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf67d8/0x00E0 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf68c8/0x013C (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: SSDT @ 0x0x3fdf6a08/0x00E0 (v 1 HP rx2660 0x00000006 INTL 0x20050309)
ACPI: WDAT @ 0x0x3fdf6da8/0x01C4 (v 1 HP rx2660 0x00000000 HP 0x00000000)
acpi0: <HP> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
ACPI timer: 0/3 1/1 0/9 0/9 0/7 0/7 1/1 0/7 0/9 0/9 -> 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5d8004-0xff5d8007 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
device_attach: acpi_perf0 attach returned 6
device_attach: acpi_perf0 attach returned 6
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x103c, dev=0x1303, revid=0x00
bus=0, slot=1, func=0
class=ff-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0144, statreg=0x0290, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x103c, dev=0x1302, revid=0x00
bus=0, slot=1, func=1
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0290, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[14]: type Memory, range 64, base 0x88034000, size 12, enabled
map[1c]: type Prefetchable Memory, range 64, base 0x80080000000, size 17, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x103c, dev=0x1048, revid=0x00
bus=0, slot=1, func=2
class=07-00-02, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0290, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x01 (250 ns)
intpin=a, irq=0
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[14]: type Memory, range 64, base 0x88033000, size 12, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0210, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x88032000, size 12, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 17
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0210, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x88031000, size 12, enabled
pcib0: matched entry for 0.2.INTB
pcib0: slot 2 INTB hardwired to IRQ 18
Loading.: HP-UX Primary Boot: 0/1/1/0.0.0.0.0
Starting: HP-UX Primary Boot: 0/1/1/0.0.0.0.0
Marcel Moolenaar schrieb:
> [Followup]
>
> On May 4, 2007, at 9:00 AM, Marcel Moolenaar wrote:
>
>> On May 4, 2007, at 3:28 AM, Richard Walter wrote:
>>
>>> Output from console:
>>>
>>> FreeBSD 7.0-CURRENT-200704 #0: Sat Apr 14 03:19:00 UTC 2007
>>> root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
>>> CPU: Montecito (1594.71-Mhz Itanium 2)
>>> Origin = "GenuineIntel" Revision = 7
>>> Features = 0x5<LB,AO>
>>> real memory = 1050492928 (1001 MB)
>>> avail memory = 978149376 (932 MB)
>>> FPSWA Revision = 0x10012, Entry = 0xe0000100ffd18050
>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>>> cpu0: SAPIC Id=0, SAPIC Eid=0 (BSP)
>>> cpu2: SAPIC Id=2, SAPIC Eid=0
>>> acpi0: <HP> on motherboard
>
> Richard,
>
> The machine is definitely hung at this point. The problem is a
> faulty address specifier in ACPI. The address in the GAS is a
> memory mapped I/O address, while the address space indication
> is I/O port space. This discrepancy results in an invalid access
> to I/O port space, which causes the machine to hang.
>
> I put a work around in FreeBSD-current that checks for this and
> calculate the intended memory address rather than the I/O port
> memory address. This makes the kernel boot.
>
> The work-around will be in the June snapshot and you should be
> able to boot on the rx2660.
> FYI,
>
--
with best regards
Richard
____________
Virus checked by G DATA AntiVirusKit
Version: AVKA 17.255 from 26.06.2007
Virus news: www.antiviruslab.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46821CEE.9060203>