Date: Wed, 25 Jul 2007 19:03:15 +0800 From: Ganbold <ganbold@micom.mng.net> To: Mihai Tanasescu <mihai@duras.ro> Cc: freebsd-net@freebsd.org Subject: Re: mpd and vlan Message-ID: <46A72DF3.8040109@micom.mng.net> In-Reply-To: <46A72BFF.1020301@duras.ro> References: <1159971789.00612536.1159960802@10.7.7.3> <4524055D.7060906@mavhome.dp.ua> <4529C408.5070807@micom.mng.net> <452A008B.8040804@mavhome.dp.ua> <452A0F2A.3000901@micom.mng.net> <452A164A.9080507@mavhome.dp.ua> <45814888.1060301@micom.mng.net> <45814B40.4080004@mavhome.dp.ua> <46A72173.7070907@micom.mng.net> <46A72BFF.1020301@duras.ro>
next in thread | previous in thread | raw e-mail | index | archive | help
Mihai Tanasescu wrote:
> Sorry for asking as a follow-up to your question...but do you have a
> working config for MPD and pptp.
>
>
> I'm desperately trying to get mine to work...but mpd refuses to listen
> to connections on my interface (it starts, it gives no errors, it
> loads the pptp1 config, I can access its console, etc).
>
>
>
>
>
>
Something like:
default:
load pptp0
load pptp1
pptp0:
new -i ng0 pptp0 pptp0
set ipcp ranges 192.168.1.2/32 192.168.5.1/24
load pptp_standard
pptp1:
new -i ng1 pptp1 pptp1
set ipcp ranges 192.168.1.2/32 192.168.5.2/24
load pptp_standard
pptp_standard:
set iface idle 0
set iface disable on-demand
set iface disable proxy-arp
set iface enable tcpmssfix
set iface mtu 1500
set iface route default
set iface enable radius-session
set bundle no multilink
set bundle disable multilink
set bundle enable compression
set bundle max-logins 3
set bundle enable radius-acct
set bundle enable radius-auth
# set link type pptp
set link no pap
set link enable chap
set link keep-alive 10 60
set link max-redial -1
set link yes acfcomp protocomp
set link mtu 1460
set link latency 0
set ipcp dns 192.168.1.1 192.168.0.1
set ipcp yes vjcomp
set ccp yes mppc
set ccp yes mpp-e40
mpd.links
---------------------------------------
pptp0:
set link type pptp
set pptp self 192.168.1.1
set pptp enable incoming
set pptp disable originate
pptp1:
set link type pptp
set pptp self 192.168.1.1
set pptp enable incoming
set pptp disable originate
set ccp yes mpp-e128
set ccp yes mpp-stateless
set pptp self 192.168.1.1
set pptp enable incoming
set pptp disable originate
###############
set radius timeout 10
set radius config /usr/local/etc/mpd/radius.conf
set radius retries 3
I tested it a long ago with mpd-3.18. It worked at that time.
hth,
Ganbold
--
Boys will be boys, and so will a lot of middle-aged men. -- Kin Hubbard
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46A72DF3.8040109>