Date: Wed, 06 Feb 2008 00:52:09 +0100 From: Raaf <raaf@zen.mooo.com> To: Jan Henrik Sylvester <me@janh.de> Cc: multimedia-list freebsd <freebsd-multimedia@freebsd.org> Subject: Re: Freecom DVB-T channel scan crashes kaffeine Message-ID: <47A8F6A9.4000008@zen.mooo.com> In-Reply-To: <47A84DF6.20502@janh.de> References: <47A333D8.9000004@janh.de> <47A440FF.5070409@zen.mooo.com> <47A84DF6.20502@janh.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Jan Henrik Sylvester wrote: > Raaf wrote: >> It's called Typhony, i put it on the website today: > > It works. Thank you. > > Compiling scan, make failed since "-include $(wildcard *.d) dummy" is > invalid as a line in dvbusb/app/scan/Makefile on its own. > It builds fine here, make sure you use gmake. > Moreover, I got the following warning from Typhony (Import Channels): > > 4 invalid channels found: > > 02 [NDR FS HH conflicts with NDR FS NDS *] NDR FS > HH:205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:4881:4882:130 > > 03 [NDR FS SH * conflicts with NDR FS NDS *] NDR FS SH > *:205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:4881:4882:131 > > 04 [NDR FS MVP * conflicts with NDR FS NDS *] NDR FS MVP > *:205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:4881:4882:132 > > 27 [duplicate pids] tvtv > DIGITAL:674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:0:32770 > > > As a consequence, I cannot access those channels. I do not know what 27 > (tvtv) is, but I know that we have 02, 03, and 04. > 02, 03, and 04 all have the same tuning parameters and use the same audio and video pids, only the pmt differs. It seems that these are regional channels that were broadcasting the same program at the time you were scanning. Try scanning again at different time to see if you get different pids. http://en.wikipedia.org/wiki/NDR_Fernsehen tvtv has both the audio and the video pid set to zero so it probably contains some other than video or audio data. Typhony can only handle audio and video data. > I often get "dvb dvr read timeout" after double clicking on a channel. > Usually it works again after "Stop" and "Play". Is that expected? > No its' not. Does it happen only when you are switching from one channel to another channel, or also when you are tuning to a channel from the stopped state? Also is it printed once after a channel switch or every second? > Are the messages from dvbusb I mentioned before expected using Kaffeine? > dvbusb_usb_get_packets: Warning discarded 180 unknown bytes > discontinuity for pid: 17 expected: 2 got: 8 > Either you are using an old version of the driver or you have build the driver with diagnostic on, I suggest you don't build the driver with diagnostic to keep your dmesg from getting spammed.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47A8F6A9.4000008>