Date: Tue, 12 Feb 2008 10:29:36 +0100 From: Thomas Vogt <freebsdlists@bsdunix.ch> To: Ian FREISLICH <ianf@clue.co.za> Cc: current@freebsd.org Subject: Re: aac, aaccli no longer work on 7. Message-ID: <47B16700.9060803@bsdunix.ch> In-Reply-To: <E1JOqtQ-0000pY-VF@clue.co.za> References: <E1JOqtQ-0000pY-VF@clue.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Ian FREISLICH wrote: > Hi > > When I run aaccli on 7-PRERELEASE, I get the following error: > > Adaptec SCSI RAID Controller Command Line Interface > Copyright 1998-2002 Adaptec, Inc. All rights reserved > -------------------------------------------------------------------------------- > > > CLI > open aac0 > Executing: open "aac0" > Command Error: <The miniport device driver is too old to work with the current A > FAAPI.DLL.> > > The device (2410SA) is detected as follows: > > hw.aac.iosize_max: 65536 > dev.aac.0.%desc: Adaptec SATA RAID 2410SA > dev.aac.0.%driver: aac > dev.aac.0.%location: slot=1 function=0 > dev.aac.0.%pnpinfo: vendor=0x9005 device=0x0285 subvendor=0x9005 subdevice=0x0290 class=0x010400 > dev.aac.0.%parent: pci6 > dev.aacd.0.%desc: RAID 1 (Mirror) > dev.aacd.0.%driver: aacd > dev.aacd.0.%parent: aac0 > > The system is amd64 SMP. The last kernel I have that works is > 7-CURRENT(i386) circa July last year. Does anyone know whether > amd64 is the issue, or whether the aac driver has just dropped > support for aaccli or if there is a newer aaccli available from > Adaptec? Or, has Adaptec just dropped FreeBSD support? Try ports/sysutils/arcconf. It should work with most adaptec controllers. Unfortantly you have to install adaptecs kernel module to use all feature with arcconf. I guess apdatecs kernel moduls are only available for 6.x (32/64bit). Regards, Thomas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47B16700.9060803>