Date: Mon, 25 Feb 2008 15:02:08 +0200 From: Andriy Gapon <avg@icyb.net.ua> To: pyunyh@gmail.com Cc: freebsd-stable@freebsd.org, yongari@freebsd.org Subject: Re: 6.3 nfe: strange behavior after hand Message-ID: <47C2BC50.5040702@icyb.net.ua> In-Reply-To: <20080204035242.GA28554@cdnetworks.co.kr> References: <47A3041D.5050402@icyb.net.ua> <20080201123603.GA14050@cdnetworks.co.kr> <47A321BB.1060708@icyb.net.ua> <47A32501.7080703@icyb.net.ua> <20080204035242.GA28554@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
on 04/02/2008 05:52 Pyun YongHyeon said the following: > On Fri, Feb 01, 2008 at 03:56:17PM +0200, Andriy Gapon wrote: > > on 01/02/2008 15:42 Andriy Gapon said the following: > > > on 01/02/2008 14:36 Pyun YongHyeon said the following: > > >> After applying attached patch and let me know the output of > > >> "devid : xxx, revid : xxx, pwr = xxx". It would be even better > > >> if you can show me the above message for working/non-working case. > > >> > > >> > > > > > > Applied the patch with correction to actually print rev instead of dev > > > for the second time :-) > > > This is in working case: > > > devid : 269, revid : a3, pwr = 00000003 > > > > A clarification: I just applied the patch, recompiled and re-loaded the > > module. There was no reboot/poweroff/reset in between. > > > > > Will wait for the non-working situation. > > > > > > > Revert previous patch and try attached patch again and let me know > how it goes. > > Tried it - still no joy, the behavior is as before. If I gracefully reboot the machine or power down and then up, then everything is OK. But if I press "reset" button and boot up, the nfe interface is "dead". BTW, I kept the line for printing devid/revid/pwr and output is the same in all cases. -- Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47C2BC50.5040702>