Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 05 Mar 2008 21:09:07 -0800
From:      Sean Bruno <sbruno@miralink.com>
To:        "Andrey V. Elsukov" <bu7cher@yandex.ru>
Cc:        freebsd-drivers@freebsd.org
Subject:   Re: ICH9 based IDE speed negotiation error
Message-ID:  <47CF7C73.70403@miralink.com>
In-Reply-To: <47CF786D.2000805@yandex.ru>
References:  <47CEF71D.6060600@miralink.com> <47CF786D.2000805@yandex.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------070701000606050604020606
Content-Type: text/plain; charset=KOI8-R; format=flowed
Content-Transfer-Encoding: 7bit

Andrey V. Elsukov wrote:
> Sean Bruno wrote:
>> I have an IBM x3250M with a CF IDE flash device in the IDE controller 
>> socket instead of the CDROM.
>> It appears that the ICH9 IDE chipset is negotiating to UDMA66 instead 
>> of UDMA33 on this board, and that is not the speed of my CF IDE device:
>> http://www.transcendusa.com/Products/ModDetail.asp?ModNo=26&LangNo=0
>
> ICH9 doesn't have an IDE function. Can you show `pciconf -l` and
> `grep ata /var/run/dmesg.boot` outputs?
>
Done and done.  Wierd huh?  I was confused as well.

Sean

--------------070701000606050604020606
Content-Type: text/plain;
 name="pciconf.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="pciconf.txt"

hostb0@pci0:0:0:        class=0x060000 card=0x03771014 chip=0x29f08086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Processor to I/O Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x03771014 chip=0x29f18086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:28:0:        class=0x060400 card=0x03771014 chip=0x29408086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:28:4:        class=0x060400 card=0x03771014 chip=0x29488086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x03771014 chip=0x29348086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
...skipping...
atapci0@pci0:31:2:      class=0x01018a card=0x03771014 chip=0x29218086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 1'
    class      = mass storage
    subclass   = ATA
none0@pci0:31:3:        class=0x0c0500 card=0x03771014 chip=0x29308086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
atapci1@pci0:31:5:      class=0x010185 card=0x03771014 chip=0x29268086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 2'
    class      = mass storage
    subclass   = ATA
pcib3@pci8:0:0: class=0x060400 card=0x00000000 chip=0x811410b5 rev=0xbc hdr=0x01
    vendor     = 'PLX Technology Inc.'
    class      = bridge
    subclass   = PCI-PCI
isp0@pci9:4:0:  class=0x0c0400 card=0x01011077 chip=0x23121077 rev=0x02 hdr=0x00
    vendor     = 'QLogic Corporation'
    device     = 'QLA2312 SANblade 2300 64-bit FC-AL Adapter'
    class      = serial bus
    subclass   = Fibre Channel

hostb0@pci0:0:0:        class=0x060000 card=0x03771014 chip=0x29f08086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Processor to I/O Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x03771014 chip=0x29f18086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:28:0:        class=0x060400 card=0x03771014 chip=0x29408086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:28:4:        class=0x060400 card=0x03771014 chip=0x29488086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x03771014 chip=0x29348086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus
...skipping...
    device     = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 1'
    class      = mass storage
    subclass   = ATA
none0@pci0:31:3:        class=0x0c0500 card=0x03771014 chip=0x29308086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
atapci1@pci0:31:5:      class=0x010185 card=0x03771014 chip=0x29268086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 2'
    class      = mass storage
    subclass   = ATA
pcib3@pci8:0:0: class=0x060400 card=0x00000000 chip=0x811410b5 rev=0xbc hdr=0x01
    vendor     = 'PLX Technology Inc.'
    class      = bridge
    subclass   = PCI-PCI
isp0@pci9:4:0:  class=0x0c0400 card=0x01011077 chip=0x23121077 rev=0x02 hdr=0x00
    vendor     = 'QLogic Corporation'
    device     = 'QLA2312 SANblade 2300 64-bit FC-AL Adapter'
    class      = serial bus
    subclass   = Fibre Channel
isp1@pci9:4:1:  class=0x0c0400 card=0x01011077 chip=0x23121077 rev=0x02 hdr=0x00
    vendor     = 'QLogic Corporation'
    device     = 'QLA2312 SANblade 2300 64-bit FC-AL Adapter'
    class      = serial bus
    subclass   = Fibre Channel
bge0@pci2:0:0:  class=0x020000 card=0x03781014 chip=0x165a14e4 rev=0x00 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5722 Gigabit Ethernet PCIe'
    class      = network
    subclass   = ethernet
bge1@pci3:1:0:  class=0x020000 card=0x026f1014 chip=0x16c714e4 rev=0x10 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5703A3 NetXtreme Gigabit Ethernet'
    class      = network

hostb0@pci0:0:0:        class=0x060000 card=0x03771014 chip=0x29f08086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Processor to I/O Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x03771014 chip=0x29f18086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:28:0:        class=0x060400 card=0x03771014 chip=0x29408086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:28:4:        class=0x060400 card=0x03771014 chip=0x29488086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x03771014 chip=0x29348086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
    class      = serial bus


--------------070701000606050604020606--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47CF7C73.70403>