Date: Thu, 7 Jul 2005 21:32:10 +0200 From: Markus Stauffer <markus.stauffer@gmail.com> To: freebsd-multimedia@freebsd.org Subject: bktr with Pinnacle PCTV Studio/Rave Message-ID: <48217d5605070712326123b1ae@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello I recently tried to load the bktr drivers on my FreeBSD 5.4 System. Somehow it doesn't detect the driver correctly: bktr_mem: memory holder loaded bktr0: <BrookTree 878> mem 0xdb010000-0xdb010fff irq 10 at device 11.0 on p= ci0 bktr0: Unable to allocate 1310720 bytes of memory. bktr0: Unable to allocate 3555328 bytes of memory. bktr0: MT2032: Companycode=3D3cbf Part=3D68 Revision=3D68 bktr0: MT2032 not found or unknown type bktr0: Detected a MSP3410G-B11 at 0x80 bktr0: Pinnacle/Miro TV, Philips PAL I tuner, msp3400c stereo. It is a new card and the linux kernel (2.6.x) detects it correctly (although not 2.4.x): > bttv: driver version 0.9.15 loaded > bttv: using 8 buffers with 2080k (520 pages) each > for > capture > bttv: Bt8xx card found (0). > PCI: Found IRQ 10 for device 0000:00:0b.0 > PCI: Sharing IRQ 10 with 0000:00:07.5 > PCI: Sharing IRQ 10 with 0000:00:0b.1 > bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 10, > latency: 32, mmio: 0xdb010000 > bttv0: detected: Pinnacle PCTV [card=3D39], PCI > subsystem ID is 11bd:0012 > bttv0: using: Pinnacle PCTV Studio/Rave > [card=3D39,autodetected] > bttv0: gpio: en=3D00000000, out=3D00000000 in=3D00fffbff > [init] > bttv0: i2c: checking for MSP34xx @ 0x80... found > bttv0: pinnacle/mt: id=3D2 info=3D"PAL+SECAM / stereo" > radio=3Dyes > bttv0: using tuner=3D33 > bttv0: i2c: checking for MSP34xx @ 0x80... found > msp34xx: init: chip=3DMSP3410G-B11 +nicam +simple > +simpler +radio mode=3Dsimple > msp3410: daemon started > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > tda9885/6/7: chip found @ 0x96 > tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] > tuner: type set to 33 (MT20xx universal) by bt878 #0 > [sw] > tuner: microtune: companycode=3D3cbf part=3D42 rev=3D2f > tuner: microtune MT2050 found, OK > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: registered device radio0 > bttv0: PLL: 28636363 =3D> 35468950 .. ok Any idea what i can do? The sysctl settings didn't help either :( --=20 Markus Stauffer
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48217d5605070712326123b1ae>