Date: Tue, 09 Dec 2008 11:06:55 +0100 From: =?ISO-8859-1?Q?Beat_G=E4tzi?= <beat@chruetertee.ch> To: Marius Strobl <marius@alchemy.franken.de> Cc: freebsd-sparc64@freebsd.org Subject: Re: Booting of 200811 snapshot on Sun Fire V880 Message-ID: <493E433F.5040703@chruetertee.ch> In-Reply-To: <20081209081300.GK52382@alchemy.franken.de> References: <4935839E.4010000@chruetertee.ch> <20081204180726.GA19048@alchemy.franken.de> <26f6c7210812050014l5dac2871k7ca1db1677d0b7d0@mail.gmail.com> <20081205172112.GA52382@alchemy.franken.de> <26f6c7210812080259j1cc1cb3bo2fe827a8442f068a@mail.gmail.com> <20081209081300.GK52382@alchemy.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Marius Strobl wrote: > On Mon, Dec 08, 2008 at 11:59:50AM +0100, Beat Gtzi wrote: >> The new image solves the initial issue but now it fails at: >> [...] >> isp1: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1000-0x10ff mem >> 0x2000000-0x2000fff at device 4.0 on pci3 >> pcib2: WARNING: using devices behind PCI-PCI bridges may cause data >> corruptionisp1: [ITHREAD] >> panic: trap: data access error >> cpuid = 0 >> KDB: enter: panic >> [thread pid 0 tid 100000 ] >> Stopped at kdb_enter+0x80: ta %xcc, 1 >> db> bt >> Tracing pid 0 tid 100000 td 0xc0848780 >> panic() at panic+0x20c >> trap() at trap+0x570 >> -- data access error %o7=0xc01e6168 -- >> isp_pci_rd_reg_1080() at isp_pci_rd_reg_1080+0x198 >> isp_reset() at isp_reset+0x728 >> isp_pci_attach() at isp_pci_attach+0x1f70 >> device_attach() at device_attach+0x4a4 >> device_probe_and_attach() at device_probe_and_attach+0x64 >> bus_generic_attach() at bus_generic_attach+0x10 >> ofw_pcibus_attach() at ofw_pcibus_attach+0x72c >> device_attach() at device_attach+0x4a4 >> device_probe_and_attach() at device_probe_and_attach+0x64 >> bus_generic_attach() at bus_generic_attach+0x10 >> ofw_pcib_attach() at ofw_pcib_attach+0x38 >> device_attach() at device_attach+0x4a4 >> device_probe_and_attach() at device_probe_and_attach+0x64 >> bus_generic_attach() at bus_generic_attach+0x10 >> ofw_pcibus_attach() at ofw_pcibus_attach+0x72c >> device_attach() at device_attach+0x4a4 >> device_probe_and_attach() at device_probe_and_attach+0x64 >> bus_generic_attach() at bus_generic_attach+0x10 >> schizo_attach() at schizo_attach+0x13b8 >> device_attach() at device_attach+0x4a4 >> device_probe_and_attach() at device_probe_and_attach+0x64 >> bus_generic_attach() at bus_generic_attach+0x10 >> nexus_attach() at nexus_attach+0x4fc >> device_attach() at device_attach+0x4a4 >> device_probe_and_attach() at device_probe_and_attach+0x64 >> root_bus_configure() at root_bus_configure+0x28 >> configure() at configure+0x4 >> mi_startup() at mi_startup+0x18c >> btext() at btext+0x30 >> db> >> >> I could provide remote access to the server but I may need some days >> to set up a netboot environment. >> > > If you haven't lost patience yet, could you please try (currently > still uploading): > http://people.freebsd.org/~marius/8.0-20081208-SNAP-sparc64-disc1.iso.gz > ? Btw., sorry for the inconveniences, the drivers bugs you > happen to hit aren't actually sparc64-specific though. The new image fixes the data access error but it seems that I run into another bug: isp1: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1000-0x10ff mem 0x2000000-0x2000fff at device 4.0 on pci3 pcib2: WARNING: using devices behind PCI-PCI bridges may cause data corruptionisp1: [ITHREAD] isp1: Board Type 10160, Chip Revision 0x6, loaded F/W Revision 10.4.41 isp1: invalid NVRAM header isp2: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1100-0x11ff mem 0x2002000-0x2002fff at device 5.0 on pci3 pcib2: WARNING: using devices behind PCI-PCI bridges may cause data corruptionisp2: [ITHREAD] isp2: Board Type 10160, Chip Revision 0x6, loaded F/W Revision 10.4.41 isp2: invalid NVRAM header pcib4: <Sun Host-PCI bridge> mem 0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f,0x7ffe8000000-0x7ffe80000ff irq 626,624,625,628,630 on nexus0 pcib4: Schizo, version 4, IGN 0x9, bus A, 33MHz Timecounter "pcib4" frequency 150000000 Hz quality 100 pcib4: DVMA map: 0xc0000000 to 0xffffffff pcib4: [FILTER] pcib4: [FILTER] pcib4: [FILTER] pcib4: [FILTER] pci4: <OFW PCI bus> on pcib4 pci4: <bridge> at device 2.0 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 2.1 on pci4 miibus2: <MII bus> on hme0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus2 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: 00:03:ba:xx:xx:xx pcib4: invalid interrupt vector 0x245 hme0: couldn't establish interrupt panic: trap: fast data access mmu miss cpuid = 0 KDB: enter: panic [thread pid 0 tid 100000 ] Stopped at kdb_enter+0x80: ta %xcc, 1 db> bt Tracing pid 0 tid 100000 td 0xc0848780 panic() at panic+0x20c trap() at trap+0x570 -- fast data access mmu miss tar=0 %o7=0xc0328a48 -- _rw_rlock() at _rw_rlock+0x170 in_pcbpurgeif0() at in_pcbpurgeif0+0x24 in_ifdetach() at in_ifdetach+0x1c if_detach() at if_detach+0x180 ether_ifdetach() at ether_ifdetach+0x58 hme_detach() at hme_detach+0x64 hme_pci_attach() at hme_pci_attach+0x388 device_attach() at device_attach+0x4a4 device_probe_and_attach() at device_probe_and_attach+0x64 bus_generic_attach() at bus_generic_attach+0x10 ofw_pcibus_attach() at ofw_pcibus_attach+0x72c device_attach() at device_attach+0x4a4 device_probe_and_attach() at device_probe_and_attach+0x64 bus_generic_attach() at bus_generic_attach+0x10 schizo_attach() at schizo_attach+0x13b8 device_attach() at device_attach+0x4a4 device_probe_and_attach() at device_probe_and_attach+0x64 bus_generic_attach() at bus_generic_attach+0x10 nexus_attach() at nexus_attach+0x4fc device_attach() at device_attach+0x4a4 device_probe_and_attach() at device_probe_and_attach+0x64 root_bus_configure() at root_bus_configure+0x28 configure() at configure+0x4 mi_startup() at mi_startup+0x18c btext() at btext+0x30 db> Thanks for your help! Beat
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?493E433F.5040703>