Date: Sun, 11 Jan 2009 12:37:40 +0000 From: =?ISO-8859-15?Q?Dorian_B=FCttner?= <dorian.buettner@gmx.de> To: Antti Louko <alo@louko.com> Cc: freebsd-usb@freebsd.org Subject: Re: usb/107827: [ohci] [panic] ohci_add_done addr not found Message-ID: <4969E814.9010307@gmx.de> In-Reply-To: <200901111140.n0BBe9rQ081118@freefall.freebsd.org> References: <200901111140.n0BBe9rQ081118@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Antti Louko schrieb: > The following reply was made to PR usb/107827; it has been noted by GNATS. > > From: Antti Louko <alo@louko.com> > To: bug-followup@FreeBSD.org > Cc: fstoffel@gmx.de > Subject: Re: usb/107827: [ohci] [panic] ohci_add_done addr not found > Date: Sun, 11 Jan 2009 13:17:16 +0200 > > I am experiencing this with both 7.1-RELEASE and 8.0-CURRENT-200812. The > motherboard is Asus M2A-VM-HDMI. > > If there is as much as USB memory stick in the USB interface, system panics. > > This is a show stopper to my plan to boot from USB stick and have all > the rest in ZFS pool (part SATA, part FF or USB). > > And this is on old bug. Has anyone has even an idea where to look and > what kind of work-around might be possible? > > _______________________________________________ > freebsd-usb@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org" > I have the same board except the HDMI part, that should not disturb the SB600 error. On your -current, did you test the GENERIC and/or the USB2-Kernel? Tried that yesterday and at least, it doesn't panic on boot so far. My Logitech G15 Keyboard therefore is not detected, even after boot I can attach/detach as muchas I want the USB simply doesn't care. Attaching the razor mouse drops into db> But I was able to mount a stick and get a dmesg out of it, if that is anything useful. [-- Attachment #2 --] Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #3: Sun Jan 11 01:20:02 UTC 2009 root@zock:/usr/obj/usr/src/sys/USB2 WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2999.90-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 usable memory = 2136489984 (2037 MB) avail memory = 2063507456 (1967 MB) ACPI APIC Table: <ATI ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <ATI ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfddff000-0xfddfffff irq 19 at device 0.0 on pci2 re0: turning off MSI enable bit. re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1b:fc:73:9e:b8 re0: [FILTER] atapci0: <ATI AHCI controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: [ITHREAD] usbus2: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci3 ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci4 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <multimedia, audio> at device 6.0 (no driver attached) pci3: <input device> at device 6.1 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0 uart0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <ATI> at usbus0 ushub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 ushub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 ushub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 ushub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 ushub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 ushub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 acd0: DVDR <DVDR PX-750A/1.03> at ata0-master UDMA66 ad4: 305245MB <SAMSUNG HD320KJ CP100-11> at ata2-master SATA300 SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. GEOM: ad4s2: geometry does not match label (255h,63s != 16h,63s). ushub0: 2 ports with 2 removable, self powered ushub1: 2 ports with 2 removable, self powered ushub2: 2 ports with 2 removable, self powered ushub3: 2 ports with 2 removable, self powered ushub4: 2 ports with 2 removable, self powered GEOM: ad4s3: geometry does not match label (255h,63s != 16h,63s). GEOM_LABEL: Label for provider ad4s4 is ntfs/Scrott. Trying to mount root from ufs:/dev/ad4s3a WARNING: / was not properly dismounted lock order reversal: 1st 0xffffff00012f5070 user map (user map) @ /usr/src/sys/vm/vm_map.c:3198 2nd 0xffffff0001a5fd80 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2079 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x32 _witness_debugger() at _witness_debugger+0x1e witness_checkorder() at witness_checkorder+0x8ca __lockmgr_args() at __lockmgr_args+0x218 ffs_lock() at ffs_lock+0x77 VOP_LOCK1_APV() at VOP_LOCK1_APV+0xbf _vn_lock() at _vn_lock+0x6e vget() at vget+0xc8 vnode_pager_lock() at vnode_pager_lock+0x1a9 vm_fault() at vm_fault+0x23e trap_pfault() at trap_pfault+0x111 trap() at trap+0x250 calltrap() at calltrap+0x8 --- trap 0xc, rip = 0x40014f, rsp = 0x7fffffffee70, rbp = 0x7fffffffee90 --- WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted ushub5: 10 ports with 10 removable, self powered usb2_alloc_device:1423: set address 2 failed (ignored) usb2_alloc_device:1458: getting device descriptor at addr 2 failed! usb2_req_re_enumerate:1362: addr=2, set address failed! (ignored) usb2_req_re_enumerate:1375: getting device descriptor at addr 2 failed! usb2_req_re_enumerate:1362: addr=2, set address failed! (ignored) usb2_req_re_enumerate:1375: getting device descriptor at addr 2 failed! ugen1.2: <> at usbus1 (disconnected) uhub_reattach_port:417: could not allocate new device! link_elf_obj: symbol dev2unit undefined kldload: /usr/local/modules/fuse.ko: Unsupported file type GEOM_LABEL: Label ntfs/Scrott removed. lock order reversal: 1st 0xffffff0001f1f270 ufs (ufs) @ /usr/src/sys/ufs/ffs/ffs_snapshot.c:424 2nd 0xfffffffe69a4fe30 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443 3rd 0xffffff0001c24270 ufs (ufs) @ /usr/src/sys/ufs/ffs/ffs_snapshot.c:545 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x32 _witness_debugger() at _witness_debugger+0x1e witness_checkorder() at witness_checkorder+0x8ca __lockmgr_args() at __lockmgr_args+0x748 ffs_lock() at ffs_lock+0x77 VOP_LOCK1_APV() at VOP_LOCK1_APV+0xbf _vn_lock() at _vn_lock+0x6e ffs_snapshot() at ffs_snapshot+0x115d ffs_mount() at ffs_mount+0x11eb vfs_donmount() at vfs_donmount+0x11b6 nmount() at nmount+0xb5 syscall() at syscall+0x2e9 Xfast_syscall() at Xfast_syscall+0xab --- syscall (378, FreeBSD ELF64, nmount), rip = 0x80079398c, rsp = 0x7fffffffea58, rbp = 0x1211000 --- lock order reversal: 1st 0xfffffffe69a4fe30 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443 2nd 0xffffff0008161630 snaplk (snaplk) @ /usr/src/sys/ufs/ffs/ffs_snapshot.c:794 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x32 _witness_debugger() at _witness_debugger+0x1e witness_checkorder() at witness_checkorder+0x8ca __lockmgr_args() at __lockmgr_args+0x748 ffs_lock() at ffs_lock+0x77 VOP_LOCK1_APV() at VOP_LOCK1_APV+0xbf _vn_lock() at _vn_lock+0x6e ffs_snapshot() at ffs_snapshot+0x20b3 ffs_mount() at ffs_mount+0x11eb vfs_donmount() at vfs_donmount+0x11b6 nmount() at nmount+0xb5 syscall() at syscall+0x2e9 Xfast_syscall() at Xfast_syscall+0xab --- syscall (378, FreeBSD ELF64, nmount), rip = 0x80079398c, rsp = 0x7fffffffea58, rbp = 0x1211000 --- lock order reversal: 1st 0xffffff0008161630 snaplk (snaplk) @ /usr/src/sys/kern/vfs_vnops.c:293 2nd 0xffffff0001f1f270 ufs (ufs) @ /usr/src/sys/ufs/ffs/ffs_snapshot.c:1588 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x32 _witness_debugger() at _witness_debugger+0x1e witness_checkorder() at witness_checkorder+0x8ca __lockmgr_args() at __lockmgr_args+0x748 ffs_snapremove() at ffs_snapremove+0x11c softdep_releasefile() at softdep_releasefile+0x41 ufs_inactive() at ufs_inactive+0x1a5 VOP_INACTIVE_APV() at VOP_INACTIVE_APV+0xb7 vinactive() at vinactive+0x8c vput() at vput+0x1e1 vn_close() at vn_close+0xe9 vn_closefile() at vn_closefile+0xd6 _fdrop() at _fdrop+0x3c closef() at closef+0x26b kern_close() at kern_close+0xff close() at close+0xb syscall() at syscall+0x2e9 Xfast_syscall() at Xfast_syscall+0xab --- syscall (6, FreeBSD ELF64, close), rip = 0x80081e39c, rsp = 0x7fffffffea58, rbp = 0 --- lock order reversal: 1st 0xffffff0001e85ba8 ntfs (ntfs) @ /usr/src/sys/kern/vfs_subr.c:2079 2nd 0xffffff0001e11c40 ntnode (ntnode) @ /usr/src/sys/fs/ntfs/ntfs_subr.c:361 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x32 _witness_debugger() at _witness_debugger+0x1e witness_checkorder() at witness_checkorder+0x8ca __lockmgr_args() at __lockmgr_args+0x748 ntfs_ntget() at ntfs_ntget+0x75 ntfs_ntlookupfile() at ntfs_ntlookupfile+0x4a ntfs_lookup() at ntfs_lookup+0x167 VOP_CACHEDLOOKUP_APV() at VOP_CACHEDLOOKUP_APV+0xb3 vfs_cache_lookup() at vfs_cache_lookup+0xcc VOP_LOOKUP_APV() at VOP_LOOKUP_APV+0xb7 lookup() at lookup+0x58f namei() at namei+0x4a0 vn_open_cred() at vn_open_cred+0x2d7 vn_open() at vn_open+0x17 kern_openat() at kern_openat+0x140 kern_open() at kern_open+0x19 open() at open+0x18 syscall() at syscall+0x2e9 Xfast_syscall() at Xfast_syscall+0xab --- syscall (5, FreeBSD ELF64, open), rip = 0x8009a8abc, rsp = 0x7fffffffe648, rbp = 0x9 --- ugen5.2: <CBM> at usbus5 umass0: <CBM Flash Disk, class 0/0, rev 2.00/1.00, addr 2> on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <CBM Flash Disk 5.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 2007MB (4111872 512 byte sectors: 255H 63S/T 255C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. GEOM_LABEL: Label for provider da0s1 is msdosfs/DISK_IMG. GEOM_LABEL: Label msdosfs/DISK_IMG removed. GEOM_LABEL: Label for provider da0s1 is msdosfs/DISK_IMG. GEOM_LABEL: Label msdosfs/DISK_IMG removed.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4969E814.9010307>