Date: Mon, 02 Feb 2009 14:14:34 +0300 From: Subscriber <subscr1024@mail.ru> To: freebsd-current@freebsd.org Cc: Sam Leffler <sam@freebsd.org> Subject: Re: ath driver (?) lock system after last update Message-ID: <4986D59A.9080906@mail.ru> In-Reply-To: <49867969.3020406@freebsd.org> References: <498652D2.7030906@mail.ru> <49867969.3020406@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Output of 'sysctl dev.ath': dev.ath.0.%desc: Atheros 5424/2424 dev.ath.0.%driver: ath dev.ath.0.%location: slot=3D0 function=3D0 dev.ath.0.%pnpinfo: vendor=3D0x168c device=3D0x001c subvendor=3D0x1a3b=20 subdevice=3D0x1026 class=3D0x020000 dev.ath.0.%parent: pci2 dev.ath.0.smoothing_rate: 95 dev.ath.0.sample_rate: 10 dev.ath.0.sample_stats: 0 dev.ath.0.countrycode: 0 dev.ath.0.regdomain: 96 dev.ath.0.slottime: 20 dev.ath.0.acktimeout: 48 dev.ath.0.ctstimeout: 48 dev.ath.0.softled: 0 dev.ath.0.ledpin: 0 dev.ath.0.ledon: 0 dev.ath.0.ledidle: 2700 dev.ath.0.txantenna: 0 dev.ath.0.rxantenna: 2 dev.ath.0.diversity: 1 dev.ath.0.txintrperiod: 5 dev.ath.0.diag: 0 dev.ath.0.tpscale: 0 dev.ath.0.tpc: 0 dev.ath.0.tpack: 63 dev.ath.0.tpcts: 63 dev.ath.0.rfsilent: 1 dev.ath.0.rfkill: 1 dev.ath.0.intmit: 1 dev.ath.0.monpass: 24 I not changed sysctl setting for ath0 because of fine forking with defaul= t=20 settings on early drivers. > and how your card is configured. What it means? Wireless network related rc.conf settings? if_up_delay=3D"1" wlans_ath0=3Dwlan0 ifconfig_wlan0=3D"WPA DHCP" I use FreeBSD 7.1 box with Atheros wi-fi card (don't remember exact model= , can=20 see later if it need) as wireless AP (bridge). Sam Leffler =D0=BF=D0=B8=D1=88=D0=B5=D1=82: > Subscriber wrote: >> I updated my 8-CURRENT and now system freeze shortly after boot (~0.5-= 3 >> minutes). I see following messages in console: >> >> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3=20 >> ts_status 0x0 >> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4=20 >> ts_status 0x0 >> ... >> >> much time, then system freeze. Before last update I was never see=20 >> those messages. >> Now I rolled back to HEAD sources with date=3D2009.01.01, and all seem= s OK. >=20 >=20 >> ath0: <Atheros 5424/2424> mem 0xfd7f0000-0xfd7fffff irq 16 at device=20 >> 0.0 on pci2 >> ath0: [ITHREAD] >> ath0: WARNING: using obsoleted if_watchdog interface >> ath0: mac 14.2 phy 7.0 radio 10.2 >=20 > I need to see the output of sysctl dev.ath.0 and how your card is=20 > configured. >=20 > Sam >=20 > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.o= rg" >=20 >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4986D59A.9080906>