Date: Wed, 20 Dec 2006 20:08:57 +0300 From: "Abdullah Al-Marrie" <almarrie@gmail.com> To: "Bruno Ducrot" <ducrot@poupinou.org> Cc: Kevin Foo <kevin.foo@zaidibrahim.com>, freebsd-mobile@freebsd.org Subject: Re: Acer Aspire WLMi 5102 with AMD Turion 64 X2 system hanging with powerd on 6.2-RC1 and 6.2-PRERELEASE Message-ID: <499c70c0612200908x36f9cb5fk3eb9b7e71bc664a4@mail.gmail.com> In-Reply-To: <20061220103735.GT4945@poupinou.org> References: <499c70c0612200040w246c8cfcu9047463cb98bcff9@mail.gmail.com> <200612201711.25944.kevin.foo@zaidibrahim.com> <20061220103735.GT4945@poupinou.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/20/06, Bruno Ducrot <ducrot@poupinou.org> wrote: > Hi, > > On Wed, Dec 20, 2006 at 05:11:25PM +0800, Kevin Foo wrote: > > On Wednesday 20 December 2006 16:40, Abdullah Al-Marrie wrote: > > > Hello guys, > > > > > > I have problem with my laptop Acer Aspire 5102 WLMi which has AMD > > > Turion? 64 X2 dual-core TL-50 1.6 GHz with 1.5 GB of ram. > > > > > > I'm running i386 6.2-RC1 upgraded to 6.2-PRELEASE via RELENG6 tag > > > since I don't have more than 4 GB of ram. > > > > > > But the the laptop even doesn't boot some times, and if booted it > > > hangs all the time, till I hashed out powerd_enable="YES" > > > > > > hints? > > 1) Try patch from ariff@ > > http://people.freebsd.org/~ariff/misc/idlecpu_apic_4.diff > > > > and set /boot/loader.conf > > hw.apic.idle_cpu to "1" or "2" > > Unrelated but might be helpful though. > > > 2) For HDA, use ariff@ RELENG_6 patch:- > > Where do you see there is a problem with the sound btw? > > To the OP, please provide at first an output from those commands: > > sysctl dev.cpu > sysctl dev.powernow > sysctl dev.acpi_throttle > > If there is something from both dev.powernow and dev.acpi_throttle, > please check what driver is actually faulty by disabling one. > > For exemple, putting that line: > hint.acpi_throttle.0.disabled="1" > onto /boot/loader.conf > will disable acpi_throttle. > The same apply for powernow: > hint.powernow.0.disabled="1" > > Note that a verbose dmesg (boot -v) might be helpful also. > > Cheers, Here the output per your request. FreeBSD 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #2: Wed Dec 20 01:46:41 AST 2006 root@:/usr/obj/usr/src/sys/ARABIAN i386 #sysctl dev.cpu dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.CPU0 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq: 1592 dev.cpu.0.freq_levels: 1592/70000 796/19383 dev.cpu.1.%desc: ACPI CPU dev.cpu.1.%driver: cpu dev.cpu.1.%location: handle=\_PR_.CPU1 dev.cpu.1.%pnpinfo: _HID=none _UID=0 dev.cpu.1.%parent: acpi0 #sysctl dev.powernow dev.powernow.0.%desc: PowerNow! K8 dev.powernow.0.%driver: powernow dev.powernow.0.%parent: cpu0 dev.powernow.0.freq_settings: 1592/70000 796/19383 dev.powernow.1.%desc: PowerNow! K8 dev.powernow.1.%driver: powernow dev.powernow.1.%parent: cpu1 dev.powernow.1.freq_settings: 1592/70000 796/19383 # sysctl dev.acpi_throttle sysctl: unknown oid 'dev.acpi_throttle' dmesg -v output Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #2: Wed Dec 20 01:46:41 AST 2006 root@:/usr/obj/usr/src/sys/ARABIAN Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a7b000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a7b1c4. Preloaded elf module "/boot/kernel/wlan_acl.ko" at 0xc0a7b270. Preloaded elf module "/boot/modules/bcmwl5_sys.ko" at 0xc0a7b320. Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc0a7b3d0. Preloaded elf module "/boot/kernel/ndis.ko" at 0xc0a7b47c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a7b528. Table 'FACP' at 0x57e99c04 Table 'SLIC' at 0x57e99c78 Table 'SSDT' at 0x57e99dee Table 'APIC' at 0x57e99f70 MADT: Found table at 0x57e99f70 MP Configuration Table version 1.4 found at 0xc009e171 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) INTR: Adding local APIC 0 as a target ACPI APIC Table: <PTLTD APIC > Calibrating clock(s) ... i8254 clock: 1193217 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1596012296 Hz CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> HTT bit cleared - FreeBSD does not have licensing issues requiring it. Cores per package: 2 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1474887680 (1406 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000005658afff, 1435906048 bytes (350563 pages) avail memory = 1435623424 (1369 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f80c0 bios32: Entry = 0xfd954 (c00fd954) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd950+0x0 pnpbios: Found PnP BIOS data at 0xc00f8120 pnpbios: Entry = e4c5:a1f8 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> wlan: <802.11 MAC ACL support> wlan: mac acl policy registered nfslock: pseudo-device random: <entropy source, Software, Yarrow> io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 01 00 01 1e 01 00 01 34 01 00 01 39 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 60 mode(s) found VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc08c5582 (1000022) VESA: ATI RADEON XPRESS 200M Series VESA: ATI Technologies Inc. MS48 01.00 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: INT 16 interface acpi0: <ACRSYS RSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=59501002) pcibios: BIOS_PRESENT call failed AcpiOsDerivePciId: bus 0 dev 18 func 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 AcpiOsDerivePciId: bus 0 dev 20 func 1 AcpiOsDerivePciId: bus 0 dev 20 func 3 AcpiOsDerivePciId: bus 6 dev 2 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd93ea000 pa 0x9c000 AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 Validation 0 255 N 0 3 4 5 7 After Disable 0 255 N 0 3 4 5 7 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1002, dev=0x5950, revid=0x10 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x5a3f, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x5a36, revid=0x00 bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x5a37, revid=0x00 bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x4374, revid=0x80 bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 MSI supports 1 message map[10]: type 1, range 32, base c0004000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4375, revid=0x80 bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 MSI supports 1 message map[10]: type 1, range 32, base c0005000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4373, revid=0x80 bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base c0006000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4372, revid=0x83 bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00008400, size 4, enabled map[14]: type 1, range 32, base fed00000, size 10, enabled found-> vendor=0x1002, dev=0x4376, revid=0x80 bus=0, slot=20, func=1 class=01-01-82, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 MSI supports 1 message map[20]: type 4, range 32, base 00008410, size 4, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x437b, revid=0x01 bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base c0000000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4377, revid=0x80 bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4371, revid=0x80 bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xc8000000-0xcfffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5975, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base c8000000, size 27, enabled pcib1: requested memory range 0xc8000000-0xcfffffff: good map[14]: type 4, range 32, base 00009000, size 8, enabled pcib1: requested I/O range 0x9000-0x90ff: in range map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: requested memory range 0xc0100000-0xc010ffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 17 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0x0-0x0 pcib2: prefetched decode 0x0-0x0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pcib3: secondary bus 4 pcib3: subordinate bus 5 pcib3: I/O decode 0x0-0x0 pcib3: memory decode 0x0-0x0 pcib3: prefetched decode 0x0-0x0 pci4: <ACPI PCI bus> on pcib3 pci4: physical bus=4 ohci0: <ATI SB400 USB Controller> mem 0xc0004000-0xc0004fff irq 19 at device 19.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0004000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0005000-0xc0005fff irq 19 at device 19.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0005000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0006000-0xc0006fff irq 19 at device 19.2 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0006000 ehci0: [GIANT-LOCKED] ehci0: Dropped interrupts workaround enabled usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered ugen0: vendor 0x0402 USB2.0 Camera, rev 2.00/1.00, addr 2 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8410 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: secondary bus 6 pcib4: subordinate bus 8 pcib4: I/O decode 0xa000-0xafff pcib4: memory decode 0xc0200000-0xc02fffff pcib4: prefetched decode 0xfff00000-0xfffff pcib4: Subtractively decoded bridge. pci6: <ACPI PCI bus> on pcib4 pci6: physical bus=6 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=6, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000a000, size 8, enabled pcib4: requested I/O range 0xa000-0xa0ff: in range map[14]: type 1, range 32, base c0202000, size 8, enabled pcib4: requested memory range 0xc0202000-0xc02020ff: good pcib4: matched entry for 6.1.INTA pcib4: slot 1 INTA hardwired to IRQ 21 found-> vendor=0x14e4, dev=0x4318, revid=0x02 bus=6, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base c0200000, size 13, enabled pcib4: requested memory range 0xc0200000-0xc0201fff: good pcib4: matched entry for 6.2.INTA pcib4: slot 2 INTA hardwired to IRQ 22 found-> vendor=0x1524, dev=0x1412, revid=0x10 bus=6, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x44 (17000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0203000, size 12, enabled pcib4: requested memory range 0xc0203000-0xc0203fff: good pcib4: matched entry for 6.4.INTA pcib4: slot 4 INTA hardwired to IRQ 20 found-> vendor=0x1524, dev=0x0530, revid=0x01 bus=6, slot=4, func=1 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202400, size 7, enabled pcib4: requested memory range 0xc0202400-0xc020247f: good pcib4: matched entry for 6.4.INTB pcib4: slot 4 INTB hardwired to IRQ 23 found-> vendor=0x1524, dev=0x0550, revid=0x01 bus=6, slot=4, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202800, size 8, enabled pcib4: requested memory range 0xc0202800-0xc02028ff: good pcib4: matched entry for 6.4.INTB pcib4: slot 4 INTB hardwired to IRQ 23 found-> vendor=0x1524, dev=0x0520, revid=0x01 bus=6, slot=4, func=3 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202c00, size 7, enabled pcib4: requested memory range 0xc0202c00-0xc0202c7f: good pcib4: matched entry for 6.4.INTB pcib4: slot 4 INTB hardwired to IRQ 23 found-> vendor=0x1524, dev=0x0551, revid=0x01 bus=6, slot=4, func=4 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 8, memory disabled rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000 pcib4: rl0 requested I/O range 0xa000-0xa0ff: in range rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0202000-0xc02020ff irq 21 at device 1.0 on pci6 pcib4: rl0 requested I/O range 0xa000-0xa0ff: in range miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:16:d4:1c:30:be ioapic0: routing intpin 21 (PCI IRQ 21) to vector 52 rl0: [MPSAFE] pci6: <network> at device 2.0 (no driver attached) cbb0: <PCI-CardBus Bridge> mem 0xc0203000-0xc0203fff irq 20 at device 4.0 on pci6 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0203000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x14121524 0x02100007 0x06070010 0x00824008 0x10: 0xc0203000 0x020000a0 0x20070706 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440114 0x40: 0x009f1025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x4060d021 0x00000000 0x00000000 0x90501212 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe010001 0x00c00000 0x00000013 0x0000000d 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00001003 0x00800080 0x10080400 0x000007fe 0xd0: 0x00e00000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci6: <memory, flash> at device 4.1 (no driver attached) pci6: <base peripheral> at device 4.2 (no driver attached) pci6: <memory, flash> at device 4.3 (no driver attached) pci6: <memory, flash> at device 4.4 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 55 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99750484 hz Timecounter "TSC" frequency 1596012296 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached battery0: battery initialization start acpi_acad0: acline initialization start acpi_tz0: _AC0: temperature 59.0 >= setpoint 50.0 acpi_tz0: switched from NONE to _AC0: 59.0C pcib4: cardbus0 requested memory range 0xc0200000-0xc02fffff: good pcib4: cardbus0 requested memory range 0xc0200000-0xc02fffff: good pcib4: cardbus0 requested memory range 0xc0204000-0xc0205fff: good found-> vendor=0x14e4, dev=0x4320, revid=0x03 bus=7, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 ndis0: <Wireless-G Notebook Adapter> mem 0xc0204000-0xc0205fff irq 20 at device 0.0 on cardbus0 ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xc0204000 ndis0: Reserved 0x1 bytes for rid 0 type 1 at 0x14 ndis0: [MPSAFE] ndis0: NDIS API version: 5.0 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on IXP400 chip ad0: setting UDMA100 on IXP400 chip ad0: 76319MB <HTS541080G9AT00 MB4OA60A> at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on IXP400 chip battery0: battery initialization done, tried 1 times acd0: setting UDMA33 on IXP400 chip acd0: <Slimtype DVDRW SSM-8515S/GRS6> DVDR drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm photo disc SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ndis0: bpf attached ndis0: Ethernet address: 00:12:17:bc:4f:87 ndis0: bpf attached Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init module_register: module pci/radeon already exists! Module pci/radeon failed to register: 17 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa ndis0: link state changed to DOWN ndis0: detached pcib4: cardbus0 requested memory range 0xc0200000-0xc02fffff: good pcib4: cardbus0 requested memory range 0xc0200000-0xc02fffff: good pcib4: cardbus0 requested memory range 0xc0204000-0xc0205fff: good found-> vendor=0x14e4, dev=0x4320, revid=0x03 bus=7, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 ndis0: <Wireless-G Notebook Adapter> mem 0xc0204000-0xc0205fff irq 20 at device 0.0 on cardbus0 ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xc0204000 ndis0: Reserved 0x1 bytes for rid 0 type 1 at 0x14 ndis0: [MPSAFE] ndis0: NDIS API version: 5.0 ndis0: bpf attached ndis0: Ethernet address: 00:12:17:bc:4f:87 ndis0: bpf attached ndis0: link state changed to UP # sysctl hw hw.machine: i386 hw.model: AMD Turion(tm) 64 X2 Mobile Technology TL-50 hw.ncpu: 2 hw.byteorder: 1234 hw.physmem: 1465925632 hw.usermem: 1367318528 hw.pagesize: 4096 hw.floatingpoint: 1 hw.machine_arch: i386 hw.realmem: 1474887680 hw.ata.ata_dma: 1 hw.ata.atapi_dma: 1 hw.ata.wc: 1 hw.cardbus.debug: 0 hw.cardbus.cis_debug: 0 hw.cs.debug: 0 hw.cs.ignore_checksum_failure: 0 hw.cs.recv_delay: 570 hw.firewire.try_bmr: 1 hw.firewire.hold_count: 3 hw.firewire.fwmem.eui64_hi: 0 hw.firewire.fwmem.eui64_lo: 0 hw.firewire.fwmem.speed: 2 hw.firewire.fwe.stream_ch: 1 hw.firewire.fwe.tx_speed: 2 hw.firewire.fwe.rx_queue_len: 128 hw.firewire.sbp.auto_login: 1 hw.firewire.sbp.max_speed: -1 hw.firewire.sbp.exclusive_login: 1 hw.firewire.sbp.login_delay: 1000 hw.firewire.sbp.scan_delay: 500 hw.firewire.sbp.use_doorbell: 0 hw.firewire.sbp.tags: 0 hw.pccard.debug: 0 hw.pccard.cis_debug: 0 hw.cbb.start_memory: 2281701376 hw.cbb.start_16_io: 256 hw.cbb.start_32_io: 4096 hw.cbb.debug: 0 hw.pcic.intr_mask: 57016 hw.pci.enable_io_modes: 1 hw.pci.do_power_nodriver: 0 hw.pci.do_power_resume: 1 hw.pci.host_mem_start: 2147483648 hw.pci.irq_override_mask: 57080 hw.intr_storm_threshold: 500 hw.availpages: 357892 hw.bus.devctl_disable: 0 hw.psm.tap_threshold: 25 hw.psm.tap_timeout: 125000 hw.kbd.keymap_restrict_change: 0 hw.syscons.saver.keybonly: 1 hw.syscons.bell: 1 hw.syscons.kbd_reboot: 1 hw.syscons.kbd_debug: 1 hw.syscons.sc_no_suspend_vtswitch: 0 hw.busdma.total_bpages: 547 hw.busdma.zone0.total_bpages: 512 hw.busdma.zone0.free_bpages: 512 hw.busdma.zone0.reserved_bpages: 0 hw.busdma.zone0.active_bpages: 0 hw.busdma.zone0.total_bounced: 0 hw.busdma.zone0.total_deferred: 0 hw.busdma.zone0.lowaddr: 0xffffffff hw.busdma.zone0.alignment: 256 hw.busdma.zone0.boundary: 0 hw.busdma.zone1.total_bpages: 1 hw.busdma.zone1.free_bpages: 1 hw.busdma.zone1.reserved_bpages: 0 hw.busdma.zone1.active_bpages: 0 hw.busdma.zone1.total_bounced: 0 hw.busdma.zone1.total_deferred: 0 hw.busdma.zone1.lowaddr: 0xffffffff hw.busdma.zone1.alignment: 4096 hw.busdma.zone1.boundary: 0 hw.busdma.zone2.total_bpages: 32 hw.busdma.zone2.free_bpages: 32 hw.busdma.zone2.reserved_bpages: 0 hw.busdma.zone2.active_bpages: 0 hw.busdma.zone2.total_bounced: 0 hw.busdma.zone2.total_deferred: 0 hw.busdma.zone2.lowaddr: 0xffffffff hw.busdma.zone2.alignment: 2 hw.busdma.zone2.boundary: 65536 hw.busdma.zone3.total_bpages: 2 hw.busdma.zone3.free_bpages: 2 hw.busdma.zone3.reserved_bpages: 0 hw.busdma.zone3.active_bpages: 0 hw.busdma.zone3.total_bounced: 0 hw.busdma.zone3.total_deferred: 0 hw.busdma.zone3.lowaddr: 0x3e7fffff hw.busdma.zone3.alignment: 64 hw.busdma.zone3.boundary: 0 hw.clockrate: 1596 hw.instruction_sse: 1 hw.via_feature_rng: 0 hw.via_feature_xcrypt: 0 hw.apic.enable_extint: 0 hw.ndis_filepath: /compat/ndis hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_supported: C1/0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 57.0C hw.acpi.thermal.tz0.active: 0 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 78.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 95.0C hw.acpi.thermal.tz0._ACx: 50.0C -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 Kernel config file machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident ARABIAN # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_4BSD # 4BSD scheduler options SMP # Dual cores or Multi Cpus options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption device cpufreq # Save the laptop battery power device smbus # Same as above options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] #options COMPAT_FREEBSD4 # Compatible with FreeBSD4 #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. evice apic # I/O APIC # Bus support. device eisa device pci # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. device ahd # AHA39320/29320 and onboard AIC79xx devices options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device rr232x # Highpoint RocketRAID 232x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mfi # LSI MegaRAID SAS #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer #Video Stuff device vga # VGA video card driver device splash # Splash screen and screen saver support device drm # DRM for ATI device radeondrm # Radeon 1100 options VESA # Vesa support for Splash options SC_PIXEL_MODE # add support for the raster tex options HZ=1000 options DEVICE_POLLING # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. #device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device stge # Sundance/Tamarack TC9021 gigabit Ethernet #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support #device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support #device an # Aironet 4500/4800 802.11 wireless NICs. #device ath # Atheros pci/cardbus NIC's #device ath_hal # Atheros HAL (Hardware Access Layer) #device ath_rate_sample # SampleRate tx rate control for ath #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter #device pflog #device pfsync # USB support evice uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) I'm using the latest bios of this laptop which is 2.40. PS: the ndis isn't the builtin one BCM4318 Rev 2, but WPC54G pcmcia card, I couldn't use my builtin wlan chip with ndis yet. Thank you, Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?499c70c0612200908x36f9cb5fk3eb9b7e71bc664a4>