Date: Sun, 14 Jun 2009 12:30:14 -0400 From: Andriy Bakay <andriy@irbisnet.com> To: Robert Noland <rnoland@FreeBSD.org> Cc: freebsd-x11@freebsd.org Subject: Re: External monitor is blank with nouveau driver Message-ID: <4A352596.60907@irbisnet.com> In-Reply-To: <1244983031.3132.2603.camel@balrog.2hip.net> References: <4A345C77.30600@irbisnet.com> <1244983031.3132.2603.camel@balrog.2hip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I will remove "1440x900" mode from config and try it out. I have not used yet your kernel patch. What is DDX driver? Robert Noland wrote: > On Sat, 2009-06-13 at 22:12 -0400, Andriy Bakay wrote: >> Hi Robert, >> >> I have the following hardware/software spec: >> >> ThinkPad T61 >> FreeBSD 7.1-RELEASE-p5 amd64 >> NVIDIA Quadro NVS 140M >> X driver nouveau >> External monitor NEC MultiSync 90GX2 >> >> I am connecting external monitor through VGA interface. I was able to >> detect it using command 'xrandr -q' and even turn it on: >> >> $ xrandr --output VGA-0 --auto --below LVDS-0 >> >> the geometry of my desktop changed, but monitor remain blank. >> >> Please, advise. > > The config looks good. The only thing that I notice is that you specify > Modes "1440x900" which may be limiting the usable modes. I would remove > that and just let xrandr dtrt. I haven't actually tried dual head with > the nouveau driver, though it should work. Your Virtual entry appears > to be sized reasonably to enable the second display. > > Are you using my kernel patch? It shouldn't be relevant to your issue, > just curious. This is going to be an issue with the DDX driver, if it > still won't work. > > robert. > >> Thanks, >> Andriy >> >> plain text document attachment (xorg.conf) >> Section "ServerLayout" >> Identifier "X.org Configured" >> Screen 0 "Screen0" 0 0 >> InputDevice "Synaptics_Touchpad" "CorePointer" >> InputDevice "Keyboard0" "CoreKeyboard" >> Option "DontZap" "Off" >> Option "AIGLX" "true" >> EndSection >> >> Section "Extensions" >> Option "Composite" "Enable" >> Option "XVideo" "Enable" >> EndSection >> >> Section "Files" >> ModulePath "/usr/local/lib/xorg/modules" >> FontPath "/usr/local/lib/X11/fonts/misc/" >> FontPath "/usr/local/lib/X11/fonts/TTF/" >> FontPath "/usr/local/lib/X11/fonts/OTF" >> FontPath "/usr/local/lib/X11/fonts/Type1/" >> FontPath "/usr/local/lib/X11/fonts/100dpi/" >> FontPath "/usr/local/lib/X11/fonts/75dpi/" >> FontPath "/usr/local/lib/X11/fonts/URW/" >> FontPath "/usr/local/lib/X11/fonts/freefont/" >> FontPath "/usr/local/lib/X11/fonts/TrueType/" >> FontPath "/usr/local/lib/X11/fonts/bitstream-vera/" >> FontPath "/usr/local/lib/X11/fonts/cyrillic/" >> FontPath "/usr/local/lib/X11/fonts/dejavu/" >> EndSection >> >> Section "Module" >> Load "extmod" >> Load "record" >> Load "dbe" >> Load "glx" >> Load "dri" >> Load "dri2" >> Load "synaptics" >> EndSection >> >> Section "InputDevice" >> Identifier "Keyboard0" >> Driver "kbd" >> EndSection >> >> #Section "InputDevice" >> # Identifier "Mouse0" >> # Driver "mouse" >> # Option "Protocol" "auto" >> # Option "Device" "/dev/sysmouse" >> # Option "ZAxisMapping" "4 5 6 7" >> #EndSection >> >> Section "InputDevice" >> Identifier "Synaptics_Touchpad" >> Driver "synaptics" >> >> Option "Device" "/dev/psm0" >> Option "Protocol" "psm" >> >> Option "LeftEdge" "1400" >> Option "RightEdge" "5600" >> Option "TopEdge" "1400" >> Option "BottomEdge" "4700" >> >> Option "FingerLow" "25" >> Option "FingerHigh" "30" >> >> Option "MaxTapTime" "180" >> Option "MaxTapMove" "220" >> >> Option "VertScrollDelta" "100" >> Option "HorizScrollDelta" "100" >> >> Option "MinSpeed" "0.25" >> Option "MaxSpeed" "0.5" >> Option "AccelFactor" "0.0010" >> Option "FastTaps" "off" >> >> Option "ScrollButtonRepeat" "100" >> Option "UpDownScrolling" "on" >> Option "UpDownRepeat" "on" >> Option "LeftRightScrolling" "on" >> Option "LeftRightRepeat" "on" >> >> Option "TapButton1" "0" >> Option "TapButton2" "0" >> Option "TapButton3" "0" >> >> # "SHMConfig on" seems good works with synclient(1). But this >> # options is insecure. I recommended "off" as default. >> Option "SHMConfig" "on" >> >> # If you use circular touchpad, uncomment them. >> #Option "CircularPad" "on" >> #Option "CircularScrolling" "on" >> #Option "CircScrollDelta" "0.5" >> EndSection >> >> Section "Monitor" >> Identifier "LVDS-0" >> Option "DPMS" >> EndSection >> >> Section "Monitor" >> Identifier "VGA-0" >> Option "DPMS" >> EndSection >> >> Section "Device" >> ### Available Driver options are:- >> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", >> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" >> ### [arg]: arg optional >> #Option "SWcursor" # [<bool>] >> #Option "HWcursor" # [<bool>] >> #Option "NoAccel" # [<bool>] >> #Option "ShadowFB" # [<bool>] >> #Option "UseFBDev" # [<bool>] >> #Option "Rotate" # [<str>] >> #Option "VideoKey" # <i> >> #Option "FlatPanel" # [<bool>] >> #Option "FPDither" # [<bool>] >> #Option "CrtcNumber" # <i> >> #Option "FPScale" # [<bool>] >> #Option "FPTweak" # <i> >> #Option "DualHead" # [<bool>] >> Option "UseEdidDpi" "false" >> Option "DPI" "96 x 96" >> Identifier "Card0" >> Driver "nouveau" >> VendorName "nVidia Corporation" >> BoardName "Quadro NVS 140M" >> BusID "PCI:1:0:0" >> Option "AccelMethod" "EXA" >> Option "EXANoComposite" "false" >> Option "FBTexPercent" "50" >> Option "MigrationHeuristic" "greedy" >> Option "DRI" "true >> Option "Monitor-LVDS" "LVDS-0" >> Option "Monitor-VGA" "VGA-0" >> EndSection >> >> Section "DRI" >> Mode 0666 >> EndSection >> >> Section "Screen" >> Identifier "Screen0" >> Device "Card0" >> SubSection "Display" >> Viewport 0 0 >> Depth 1 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 4 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 8 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 15 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 16 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> Modes "1440x900" >> Virtual 2048 2048 >> EndSubSection >> EndSection >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A352596.60907>