Date: Wed, 02 Dec 2009 12:08:47 -0500 From: Charles Owens <cowens@greatbaysoftware.com> To: freebsd-usb@freebsd.org Subject: USB bus setup error with 7.1 + PAE Message-ID: <4B169F1F.8050100@greatbaysoftware.com> In-Reply-To: <4B070F07.8010600@greatbaysoftware.com> References: <4B070F07.8010600@greatbaysoftware.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[originally posted to -hardware] Hello, I'm having problems with the functioning of USB keyboards with an IBM System x3550 M2 (new quad core Xeon, 6 GB RAM). With a FreeBSD 7.1 PAE-enabled kernel, initialization of some of the USB buses fails. From an external perspective, this results in the rear USB port being non-functional, while the two front USB ports work fine. For some reason, though, when booting the same PAE kernel from a CD none of the USB ports function. It may be worth noting that we have four other hardware platforms (different IBM, HP, and OEM Intel) that do not exhibit this behavior (ie. PAE and USB seem okay with each other). In previous posting ( http://docs.freebsd.org/cgi/mid.cgi?4B0D14CB.1010000 ) I included output of usbdevs and boot log when running the PAE-enabled kernel. Note the "root hub error" messages in boot log. Below I'll repeat the same info when running a non-PAE kernel. Any thoughts as to what the story is here... and suggestions for resolution? Thanks in advance. (We expect in next few days to test with 8.0 for comparison, but at this point much prefer to see matter resolved in 7.x) [root@dmz55 /usr/home/muck]# usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, Comfort Curve Keyboard 2000(0x00dd), Microsoft(0x045e), rev 1.73 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, power 100 mA, config 1, RNDIS/CDC ETHER(0x4010), IBM(0x04b3), rev 2.15 Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb6: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: high speed, power 2 mA, config 2, IBM Composite Device-0(0x4012), IBM(0x04b3), rev 0.00 port 2 powered port 3 powered port 4 powered port 5 powered port 6 addr 3: high speed, power 450 mA, config 1, product 0x1a00(0x1a00), vendor 0x2001(0x2001), rev 10.01 Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p8 #0: Wed Nov 18 11:22:57 EST 2009 muck@dmz55.greatbaysoftware.com:/usr/obj/usr/src/sys/DMZ55 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (2000.08-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Cores per package: 8 Logical CPUs per core: 2 real memory = 2137583616 (2038 MB) avail memory = 2081480704 (1985 MB) ACPI APIC Table: <IBM THURLEY > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <IBM THURLEY> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "HPET" frequency 14318180 Hz quality 900 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0 pci11: <ACPI PCI bus> on pcib1 pci11: <network, ethernet> at device 0.0 (no driver attached) pci11: <network, ethernet> at device 0.1 (no driver attached) pcib2: <PCI-PCI bridge> irq 29 at device 2.0 on pci0 pci16: <PCI bus> on pcib2 pci16: <network, ethernet> at device 0.0 (no driver attached) pci16: <network, ethernet> at device 0.1 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0 pci21: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0 pci26: <ACPI PCI bus> on pcib4 pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) pci0: <base peripheral> at device 22.0 (no driver attached) pci0: <base peripheral> at device 22.1 (no driver attached) pci0: <base peripheral> at device 22.2 (no driver attached) pci0: <base peripheral> at device 22.3 (no driver attached) pci0: <base peripheral> at device 22.4 (no driver attached) pci0: <base peripheral> at device 22.5 (no driver attached) pci0: <base peripheral> at device 22.6 (no driver attached) pci0: <base peripheral> at device 22.7 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0x20a0-0x20bf irq 17 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x2080-0x209f irq 18 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0x9ba21400-0x9ba217ff irq 19 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 != 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered pcib5: <PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <PCI bus> on pcib5 mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0x9b910000-0x9b913fff,0x9b900000-0x9b90ffff irq 16 at device 0.0 on pci1 mpt0: [ITHREAD] mpt0: MPI Version=1.5.20.0 mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 ) mpt0: 0 Active Volumes (2 Max) mpt0: 0 Hidden Drive Members (14 Max) pcib6: <PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci6: <PCI bus> on pcib6 pcib7: <PCI-PCI bridge> irq 16 at device 0.0 on pci6 pci7: <PCI bus> on pcib7 vgapci0: <VGA-compatible display> mem 0x9a000000-0x9affffff,0x9b800000-0x9b803fff,0x9b000000-0x9b7fffff irq 16 at device 0.0 on pci7 uhci2: <UHCI (generic) USB controller> port 0x2060-0x207f irq 17 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x2040-0x205f irq 18 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0x2020-0x203f irq 19 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0x9ba21000-0x9ba213ff irq 17 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <EHCI (generic) USB 2.0 controller> on ehci1 usb6: USB revision 2.0 uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6 uhub6: 6 ports with 6 removable, self powered ukbd0: <IBM IBM Composite Device-0, class 0/0, rev 2.00/0.00, addr 2> on uhub6 kbd2 at ukbd0 ums0: <IBM IBM Composite Device-0, class 0/0, rev 2.00/0.00, addr 2> on uhub6 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 ums0: <IBM IBM Composite Device-0, class 0/0, rev 2.00/0.00, addr 2> on uhub6 ums0: 3 buttons and Z dir. umass0: <IBM IBM Composite Device-0, class 0/0, rev 2.00/0.00, addr 2> on uhub6 umass1: <IBM IBM Composite Device-0, class 0/0, rev 2.00/0.00, addr 2> on uhub6 axe0: <vendor 0x2001 product 0x1a00, class 2/0, rev 2.00/10.01, addr 3> on uhub6 axe0: AX88172, bufsz 1536, boundary 64 miibus0: <MII bus> on axe0 rlphy0: <IC Plus 10/100 PHY> PHY 3 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto axe0: WARNING: using obsoleted if_watchdog interface axe0: WARNING: using obsoleted IFF_NEEDSGIANT flag axe0: Ethernet address: 00:80:c8:38:15:ff pcib8: <PCI-PCI bridge> at device 30.0 on pci0 pci31: <PCI bus> on pcib8 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20f0-0x20ff,0x20e0-0x20ef irq 16 at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ATA controller> port 0x2108-0x210f,0x2124-0x2127,0x2100-0x2107,0x2120-0x2123,0x20d0-0x20df,0x20c0-0x20cf irq 21 at device 31.5 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2> on uhub0 kbd3 at ukbd1 uhid0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2> on uhub0 cdce0: <IBM RNDIS/CDC ETHER, class 2/0, rev 2.00/2.15, addr 2> on uhub3 cdce0: faking MAC address cdce0: WARNING: using obsoleted IFF_NEEDSGIANT flag cdce0: Ethernet address: 2a:00:00:00:00:00 Timecounters tick every 1.000 msec acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-T20N/1.00> at ata0-master UDMA33 da0 at mpt0 bus 0 target 1 lun 0 da0: <ATA WD3000BLFS-23YBU 4V04> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C) da1 at mpt0 bus 0 target 2 lun 0 da1: <ATA WD3000BLFS-23YBU 4V04> Fixed Direct Access SCSI-5 device da1: 300.000MB/s transfers da1: Command Queueing Enabled da1: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! da2 at umass-sim1 bus 1 target 0 lun 0 da2: <Linux Virtual Floppy 0316> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <Linux Virtual CD/DVD 0316> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers da3 at umass-sim1 bus 1 target 0 lun 1 da3: <Linux Virtual Floppy 0316> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/da0s1a Charles Owens Great Bay Software| www.GreatBaySoftware.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B169F1F.8050100>