Date: Fri, 30 Apr 2010 22:25:44 -0400 From: Steve Bernacki <freebsd@f.copacetic.net> To: freebsd-questions@freebsd.org Subject: 8.0-RELEASE install freezes Message-ID: <4BDB9128.3060806@f.copacetic.net>
next in thread | raw e-mail | index | archive | help
Hi,
I have an ancient Pentium II 350Mhz system that I've used as a home
firewall for several years. I decided to try to upgrade it from 6.1 to
8.0 today, but I was unable to get the kernel to boot without freezing.
The point at which it froze was:
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Thinking it may be some ACPI related issue, I tried disabling ACPI in
the kernel and from the boot prompt, but still no joy. I also tried
fiddling with the PnP BIOS settings with no luck. Placing system into
verbose logging mode, it gets as far as printing out:
Device configuration finished.
procfs registered
And then freezes, right before it normally displays the "Timecounters
tick every xxx msec" line.
I have attached the full dmesg from the working 6.1 system. I know it's
a shot in the dark, but does anyone have any ideas or suggestions as to
what I could do to try to get this thing to boot? I've gotten many
years of service out of this system, but I'd still like to squeeze out a
few more. :)
Thanks,
Steve
=== 6.1 dmesg ===
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3
6,MMX,FXSR>
real memory = 268369920 (255 MB)
avail memory = 253128704 (241 MB)
kbd1 at kbdmux0
acpi0: <123456 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0x4000-0x4041,0x5000-0x500f on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device
0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0
00-0xf00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq
15 at device 7
.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <PCI-PCI bridge> at device 11.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82557 Pro/100 Ethernet> port 0xd000-0xd01f mem
0xd9100000-0xd9100fff,0xd7
000000-0xd70fffff irq 11 at device 13.0 on pci2
miibus0: <MII bus> on fxp0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:1b:01:5c
dpt0: <DPT Caching SCSI RAID Controller> port 0xd400-0xd41f irq 10 at
device 14.0 on p
ci2
dpt0: DPT PM2044W FW Rev. 07M1, 1 channel, 64 CCBs
dpt0: [GIANT-LOCKED]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xe400-0xe43f mem
0xd9301000-0xd9301fff,0xd9
000000-0xd90fffff irq 15 at device 12.0 on pci0
miibus1: <MII bus> on fxp1
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:50:bf:00:00:41
fxp2: <Intel 82559 Pro/100 Ethernet> port 0xe800-0xe83f mem
0xd9300000-0xd9300fff,0xd9
200000-0xd92fffff irq 11 at device 13.0 on pci0
miibus2: <MII bus> on fxp2
inphy1: <i82555 10/100 media interface> on miibus2
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: Ethernet address: 00:50:bf:00:00:42
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 367501477 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
ad0: 76293MB <Seagate ST380011A 3.16> at ata0-master UDMA33
da0 at dpt0 bus 0 target 0 lun 0
da0: <WDIGTL WDE9150 ULTRA2 1.30> Fixed Direct Access SCSI-2 device
da0: 8727MB (17873039 512 byte sectors: 255H 63S/T 1112C)
Trying to mount root from ufs:/dev/da0s1a
nd6_setmtu0: new link MTU on tun0 (1158) is too small for IPv6
fxp1: promiscuous mode enabled
fxp0: link state changed to DOWN
fxp0: promiscuous mode enabled
fxp0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BDB9128.3060806>