Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 26 Sep 2010 20:52:54 +0300
From:      Andriy Gapon <avg@icyb.net.ua>
To:        David DEMELIER <demelier.david@gmail.com>
Cc:        freebsd-stable <freebsd-stable@freebsd.org>, Jeremy Chadwick <freebsd@jdc.parodius.com>
Subject:   Re: Failure to burn with ahci mode.
Message-ID:  <4C9F8876.1040007@icyb.net.ua>
In-Reply-To: <AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy@mail.gmail.com>
References:  <AANLkTimH41m7Vckd3bCq%2BuwX_79sY7dP%2B0ZbwpnrJAkc@mail.gmail.com>	<4C9F16F9.50707@icyb.net.ua>	<AANLkTimAXa=1bas_GgvzRbPwzuSUn-VQHX9jWm0mRo50@mail.gmail.com>	<20100926103836.GA33415@owl.midgard.homeip.net>	<AANLkTimqTJbbc_45yLvGz93jPRm1k4YNkzzxvw%2BsE6n0@mail.gmail.com>	<20100926172527.GA38405@icarus.home.lan> <AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
on 26/09/2010 20:37 David DEMELIER said the following:
> markand@Melon ~ $ sudo camcontrol devlist
> <WDC WD3200BEKT-60F3T1 12.01A12>   at scbus0 target 0 lun 0 (ada0)
> <hp DVDRAM GT20L DC05>             at scbus1 target 0 lun 0 (cd0)
> 
> markand@Melon ~ $ sudo cdrecord downloads/FreeBSD-8.1-RELEASE-amd64-livefs.iso
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive
> dependent defaults.
> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright
> (C) 1995-2010 Jörg Schilling
> cdrecord: Error 0. Cannot open or use SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'.
> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
> 
> markand@Melon ~ $ sudo cdrecord -scanbus
> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright
> (C) 1995-2010 Jörg Schilling
> cdrecord: Error 0. Cannot open or use SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'.
> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

Doesn't look like you have xpt and pass devices in your kernel, which are
(almost) mandatory when use CAM-based drivers.
Not sure if ahci(4) mentions this.

-- 
Andriy Gapon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4C9F8876.1040007>