Date: Sun, 15 May 2011 08:23:01 -1000 From: Bruce Meier <bruce@hawaii-pacific.com> To: freebsd-stable@freebsd.org Subject: Re: setting usb disc to da1 Message-ID: <4DD01A05.1030509@hawaii-pacific.com> In-Reply-To: <4DCF6108.1060403@hawaii-pacific.com> References: <4DCC5358.4050705@chef-ingenieur.de> <34458417-0D7A-493E-8C52-F3095000D764@gsoft.com.au> <4DCE9A88.2030500@chef-ingenieur.de> <099343A5-890F-464D-89DF-593DB7C651FF@gsoft.com.au> <4DCF6108.1060403@hawaii-pacific.com>
next in thread | previous in thread | raw e-mail | index | archive | help
bruce@hawaii-pacific.com wrote: > Daniel O'Connor wrote: >> On 15/05/2011, at 24:36, Thomas Krause wrote: >> >>> I'm not sure with /boot/devices.hint. Could you give me a hint, how to >>> set >>> >>> # camcontrol devlist >>> <AMCC 9500S-4LP DISK 2.08> at scbus0 target 0 lun 0 >>> (da0,pass0) >>> <Samsung G3 Station> at scbus1 target 0 lun 0 (pass1,da1) >>> >>> the Samsung G3 permanently to da1 (the AMCC must be da0). >>> (This is a productive system and I don't want to do tests ...) >>> >> I think the following will work.. >> >> hint.scbus.0.at="twa0" >> hint.da.0.at="scbus1" >> >> hint.scbus.1.at="umass-sim0" >> hint.da.1.at="scbus0" >> >> Unfortunately I can't check the system I tested this on at the moment. >> >> I would strongly suggest you use glabel& UFS IDs (or GPT IDs if you >> used GPT when installing) in fstab rather than wiring device nodes. >> >> -- >> Daniel O'Connor software and network engineer >> for Genesis Software - http://www.gsoft.com.au >> "The nice thing about standards is that there >> are so many of them to choose from." >> -- Andrew Tanenbaum >> GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C >> >> >> >> >> >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to >> "freebsd-stable-unsubscribe@freebsd.org" >> >> > I think I have an answer to your problem. "man glabel". > > Backup all data first! > > glabel label -v usr /dev/da1 > newfs /dev/label/usr > mount /dev/label/usr /usr > [...] > umount /usr > glabel stop usr > glabel unload > > I got that unload is unavailable but it everything worked for me. > Check the man page. Hope this helps. > > Bruce > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > After testing, it made no difference.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DD01A05.1030509>