Date: Sun, 14 Aug 2011 14:13:29 +0300 From: Alexander Motin <mav@FreeBSD.org> To: Michael Butler <imb@protected-networks.net> Cc: current <current@freebsd.org> Subject: Re: oddity mounting MMC/SD cards Message-ID: <4E47ADD9.5000609@FreeBSD.org> In-Reply-To: <mailpost.1313269023.7207152.32533.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw> References: <mailpost.1313269023.7207152.32533.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi.
On 13.08.2011 23:56, Michael Butler wrote:
> I tried to mount a card from my phone (it's quicker to copy directly
> than through USB) but I get this .. what am I missing here?
>
> Aug 13 16:53:37 toshi kernel: sdhci0-slot0: Card inserted
> Aug 13 16:53:37 toshi kernel: mmc0:<MMC/SD bus> on sdhci0
> Aug 13 16:53:37 toshi kernel: mmc0: Probing bus
> Aug 13 16:53:37 toshi kernel: mmc0: SD probe: OK (OCR: 0x00ff8000)
> Aug 13 16:53:37 toshi kernel: mmc0: Current OCR: 0x00ff8000
> Aug 13 16:53:38 toshi kernel: mmc0: Probing cards
> Aug 13 16:53:38 toshi kernel: mmc0: New card detected (CID
> 03534453553136478080d4290400a300)
> Aug 13 16:53:38 toshi kernel: mmc0: Card at relative address 36832 added:
> Aug 13 16:53:38 toshi kernel: mmc0: card: SD High Capacity
> (0x3/0x5344/"SU16G" rev 8.0 m/d 03.2010 s/n 80d42904)
> Aug 13 16:53:38 toshi kernel: mmc0: bus: 4bit, 50MHz, high speed timing
> Aug 13 16:53:38 toshi kernel: mmc0: memory: 31116288 blocks, erase
> sector 8192 blocks, read-only
> Aug 13 16:53:38 toshi kernel: mmc0: setting transfer rate to 30.000MHz
> Aug 13 16:53:38 toshi kernel: mmcsd0: 2905MB<SDHC Memory Card>
> (read-only) at mmc0 24MHz/4bit
> Aug 13 16:53:38 toshi kernel: GEOM: new disk mmcsd0
> Aug 13 16:53:38 toshi kernel: mmc0: setting bus width to 4 bits
>
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
> Aug 13 16:53:38 toshi kernel: GEOM_PART: partition 1 has end offset
> beyond last LBA: 31116287> 5950463
> Aug 13 16:53:38 toshi kernel: GEOM_PART: integrity check failed (mmcsd0,
> MBR)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It looks like consequence of r222475. Could you try this patch:
--- dev/mmc/mmcsd.c.prev 2011-08-14 14:09:35.000000000 +0300
+++ dev/mmc/mmcsd.c 2011-08-14 14:09:14.000000000 +0300
@@ -137,7 +137,7 @@ mmcsd_attach(device_t dev)
d->d_drv1 = sc;
d->d_maxsize = 4*1024*1024; /* Maximum defined SD card AU
size. */
d->d_sectorsize = mmc_get_sector_size(dev);
- d->d_mediasize = mmc_get_media_size(dev) * d->d_sectorsize;
+ d->d_mediasize = (off_t)mmc_get_media_size(dev) * d->d_sectorsize;
d->d_stripeoffset = 0;
d->d_stripesize = mmc_get_erase_sector(dev) * d->d_sectorsize;
d->d_unit = device_get_unit(dev);
--
Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E47ADD9.5000609>