Date: Fri, 03 Feb 2012 16:11:59 +0100 From: Johan Hendriks <joh.hendriks@gmail.com> To: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8 Message-ID: <4F2BF93F.4060407@gmail.com> In-Reply-To: <B2FD678A64EAAD45B089B123FDFC3ED729A3414E2A@inbmail01.lsi.com> References: <20120202191105.GA55719@nargothrond.kdm.org> <4F2BF270.70303@gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3414E2A@inbmail01.lsi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Desai, Kashyap schreef: > Hi Johan, > > I have already figure out this issue in our lab. > > I also have fix for this issue. (Just don't want to create regression, that is why I have not posted outside) > Since you have seen similar issue, It is worth to try my patch. > > My machine is not getting IP right now. I will send you patch once my machine is in network ? > > ~ Kashyap > > >> -----Original Message----- >> From: owner-freebsd-stable@freebsd.org [mailto:owner-freebsd- >> stable@freebsd.org] On Behalf Of Johan Hendriks >> Sent: Friday, February 03, 2012 8:13 PM >> To: Kenneth D. Merry >> Cc: freebsd-stable >> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8 >> >> Kenneth D. Merry schreef: >>> Hi folks, >>> >>> The LSI-supported version of the mps(4) driver that supports their 6Gb >> SAS >>> HBAs as well as WarpDrive controllers, is now in stable/9 and >> stable/8. >>> Please test it out and let me and Kashyap (CCed) know if you run into >>> any problems. >>> >>> In addition to supporting WarpDrive, the driver also supports >> Integrated >>> RAID. >>> >>> Thanks to LSI for doing the work on this driver! >>> >>> Note that the CAM infrastructure changes that went into FreeBSD/head >> along >>> with this driver have not gone into either stable/9 or stable/8. Only >> the >>> driver itself has been merged. >>> >>> The CAM infrastructure changes depend on some other da(4) driver >> changes >>> that will need to get merged before they can go back. If that merge >>> happens, it will probably only be into stable/9. >>> >>> A couple of notes about issues with this driver: >>> >>> - Unlike the previous mps(4) driver, it probes sequentially. If you >> have >>> a lot of drives in your system, it will take a while to probe them >> all. >>> - You may see warning messages like this: >>> >>> _mapping_add_new_device: failed to add the device with handle 0x0019 >> to persiste >>> nt table because there is no free space available >>> _mapping_add_new_device: failed to add the device with handle 0x001a >> to persiste >>> nt table because there is no free space available >>> >>> - The driver is not endian safe. (It assumes a little endian >> machine.) >>> This is not new, the previous version of the driver had the same >> issue. >>> The LSI folks know about these issues. The driver has passed their >> testing >>> process. >>> >>> Many thanks to LSI for going through the effort to support FreeBSD. >>> >>> Ken >> Hello Ken. >> >> Just updated our 16 bay server. did a csup today. >> did try some commands, it looked like the drives got husseled. >> >> But after giving the command camcontrol rescan all it does not give back >> the prompt. >> Also top shows me the following. >> 1589 root 1 20 0 16384K 1376K cbwait 3 0:00 0.00% >> camcontrol >> >> # on another console things works >> filer01# camcontrol devlist >> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 8 lun 0 (pass0,da0) >> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 9 lun 0 (pass1,da1) >> <ATA WDC WD2500AAJS-6 2E25> at scbus0 target 10 lun 0 (pass2,da2) >> <ATA WDC WD2500JS-60M 2E04> at scbus0 target 11 lun 0 (pass3,da3) >> <ATA WDC WD2500JS-60M 2E04> at scbus0 target 12 lun 0 (pass4,da4) >> <ATA ST3250620NS BJH> at scbus0 target 13 lun 0 (pass5,da5) >> <LSI CORP SAS2X28 0717> at scbus0 target 16 lun 0 >> (probe16,ses0,pass6) >> <ATA Maxtor 6L080M0 1G10> at scbus0 target 17 lun 0 (pass7,da6) >> <ATA Maxtor 6L080M0 1G10> at scbus0 target 18 lun 0 (pass8,da7) >> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 19 lun 0 (pass9,da8) >> <ATA WDC WD800JD-60LU 1D07> at scbus0 target 20 lun 0 >> (pass10,da9) >> <ATA GB0250EAFJF HPG6> at scbus0 target 21 lun 0 >> (pass11,da10) >> <ATA ST3250620NS 3BJP> at scbus0 target 22 lun 0 >> (pass12,da11) >> <ATA ST3250620NS 3BJP> at scbus0 target 23 lun 0 >> (pass13,da12) >> <ATA ST3250620NS 3BJP> at scbus0 target 24 lun 0 >> (pass14,da13) >> <ATA ST3250310AS B> at scbus0 target 27 lun 0 >> (pass15,da14) >> <ATA ST3250620NS 3BJP> at scbus0 target 28 lun 0 >> (pass16,da15) >> <ST3808110AS 3.AJJ> at scbus1 target 0 lun 0 >> (ada0,pass17) >> <TSSTcorp CDDVDW SN-208BB SB00> at scbus3 target 0 lun 0 (pass18,cd0) >> >> The controller is a LSI 9211-8i with IT firmware. >> >> here is the dmesg >> Copyright (c) 1992-2012 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights >> reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 9.0-STABLE #0: Fri Feb 3 10:27:18 CET 2012 >> root@filer01.neuteboom.local:/usr/obj/usr/src/sys/KRNL amd64 >> CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.04-MHz K8-class CPU) >> Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a >> Stepping = 7 >> >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE >> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> Features2=0x15bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SS >> SE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX> >> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> >> AMD Features2=0x1<LAHF> >> TSC: P-state invariant, performance statistics >> real memory = 17179869184 (16384 MB) >> avail memory = 16493441024 (15729 MB) >> Event timer "LAPIC" quality 600 >> ACPI APIC Table:<SUPERM SMCI--MB> >> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >> FreeBSD/SMP: 1 package(s) x 4 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 2 >> cpu2 (AP): APIC ID: 4 >> cpu3 (AP): APIC ID: 6 >> ioapic0<Version 2.0> irqs 0-23 on motherboard >> kbd1 at kbdmux0 >> acpi0:<SUPERM SMCI--MB> on motherboard >> acpi0: Power Button (fixed) >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0:<24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >> cpu0:<ACPI CPU> on acpi0 >> cpu1:<ACPI CPU> on acpi0 >> cpu2:<ACPI CPU> on acpi0 >> cpu3:<ACPI CPU> on acpi0 >> pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0:<ACPI PCI bus> on pcib0 >> pcib1:<ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 >> pci1:<ACPI PCI bus> on pcib1 >> mps0:<LSI SAS2008> port 0xe000-0xe0ff mem 0xfb600000-0xfb603fff irq 19 >> at device 0.0 on pci1 >> mps0: Firmware: 11.00.00.00, Driver: 11.255.03.00-fbsd >> mps0: IOCCapabilities: >> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDis >> c> >> em0:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0xf020-0xf03f mem >> 0xfb800000-0xfb81ffff,0xfb824000-0xfb824fff irq 20 at device 25.0 on >> pci0 >> em0: Using an MSI interrupt >> em0: Ethernet address: 00:25:90:57:20:bd >> ehci0:<EHCI (generic) USB 2.0 controller> mem 0xfb823000-0xfb8233ff irq >> 16 at device 26.0 on pci0 >> usbus0: EHCI version 1.0 >> usbus0:<EHCI (generic) USB 2.0 controller> on ehci0 >> pcib2:<ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 >> pci2:<ACPI PCI bus> on pcib2 >> pcib3:<ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 >> pci3:<ACPI PCI bus> on pcib3 >> em1:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0xd000-0xd01f mem >> 0xfb700000-0xfb71ffff,0xfb720000-0xfb723fff irq 16 at device 0.0 on pci3 >> em1: Using MSIX interrupts with 3 vectors >> em1: Ethernet address: 00:25:90:57:20:bc >> ehci1:<EHCI (generic) USB 2.0 controller> mem 0xfb822000-0xfb8223ff irq >> 23 at device 29.0 on pci0 >> usbus1: EHCI version 1.0 >> usbus1:<EHCI (generic) USB 2.0 controller> on ehci1 >> pcib4:<ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pci4:<ACPI PCI bus> on pcib4 >> vgapci0:<VGA-compatible display> mem >> 0xf9000000-0xf9ffffff,0xfb000000-0xfb003fff,0xfa800000-0xfaffffff irq 23 >> at device 3.0 on pci4 >> isab0:<PCI-ISA bridge> at device 31.0 on pci0 >> isa0:<ISA bus> on isab0 >> ahci0:<Intel Cougar Point AHCI SATA controller> port >> 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f >> mem 0xfb821000-0xfb8217ff irq 19 at device 31.2 on pci0 >> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported >> ahcich0:<AHCI channel> at channel 0 on ahci0 >> ahcich1:<AHCI channel> at channel 1 on ahci0 >> ahcich2:<AHCI channel> at channel 2 on ahci0 >> ahcich3:<AHCI channel> at channel 3 on ahci0 >> ahcich4:<AHCI channel> at channel 4 on ahci0 >> ahcich5:<AHCI channel> at channel 5 on ahci0 >> pci0:<serial bus, SMBus> at device 31.3 (no driver attached) >> acpi_button0:<Power Button> on acpi0 >> hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >> ahcich0:<AHCI channel> at channel 0 on ahci0 >> ahcich1:<AHCI channel> at channel 1 on ahci0 >> ahcich2:<AHCI channel> at channel 2 on ahci0 >> ahcich3:<AHCI channel> at channel 3 on ahci0 >> ahcich4:<AHCI channel> at channel 4 on ahci0 >> ahcich5:<AHCI channel> at channel 5 on ahci0 >> pci0:<serial bus, SMBus> at device 31.3 (no driver attached) >> acpi_button0:<Power Button> on acpi0 >> hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 950 >> Event timer "HPET" frequency 14318180 Hz quality 550 >> Event timer "HPET1" frequency 14318180 Hz quality 440 >> Event timer "HPET2" frequency 14318180 Hz quality 440 >> Event timer "HPET3" frequency 14318180 Hz quality 440 >> Event timer "HPET4" frequency 14318180 Hz quality 440 >> attimer0:<AT timer> port 0x40-0x43 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> atrtc0:<AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> Event timer "RTC" frequency 32768 Hz quality 0 >> atkbdc0:<Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0:<AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> uart1:<16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >> uart2:<16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 >> orm0:<ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on isa0 >> sc0:<System console> at flags 0x100 on isa0 >> sc0: VGA<16 virtual consoles, flags=0x300> >> vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >> isa0 >> ppc0: cannot reserve I/O port range >> est0:<Enhanced SpeedStep Frequency Control> on cpu0 >> p4tcc0:<CPU Frequency Thermal Control> on cpu0 >> est1:<Enhanced SpeedStep Frequency Control> on cpu1 >> p4tcc1:<CPU Frequency Thermal Control> on cpu1 >> est2:<Enhanced SpeedStep Frequency Control> on cpu2 >> p4tcc2:<CPU Frequency Thermal Control> on cpu2 >> est3:<Enhanced SpeedStep Frequency Control> on cpu3 >> p4tcc3:<CPU Frequency Thermal Control> on cpu3 >> ZFS filesystem version 5 >> ZFS storage pool version 28 >> Timecounters tick every 1.000 msec >> usbus0: 480Mbps High Speed USB v2.0 >> usbus1: 480Mbps High Speed USB v2.0 >> ugen0.1:<Intel> at usbus0 >> uhub0:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >> ugen1.1:<Intel> at usbus1 >> uhub1:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 >> da0 at mps0 bus 0 scbus0 target 8 lun 0 >> da0:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device >> da0: 300.000MB/s transfers >> da0: Command Queueing enabled >> da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >> da1 at mps0 bus 0 scbus0 target 9 lun 0 >> da1:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device >> da1: 300.000MB/s transfers >> da1: Command Queueing enabled >> da1: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >> da2 at mps0 bus 0 scbus0 target 10 lun 0 >> da2:<ATA WDC WD2500AAJS-6 2E25> Fixed Direct Access SCSI-6 device >> da2: 300.000MB/s transfers >> da2: Command Queueing enabled >> da2: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da3 at mps0 bus 0 scbus0 target 11 lun 0 >> da3:<ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6 device >> da3: 300.000MB/s transfers >> da3: Command Queueing enabled >> da3: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da4 at mps0 bus 0 scbus0 target 12 lun 0 >> da4:<ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6 device >> da4: 300.000MB/s transfers >> da4: Command Queueing enabled >> da4: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da5 at mps0 bus 0 scbus0 target 13 lun 0 >> da5:<ATA ST3250620NS BJH> Fixed Direct Access SCSI-6 device >> da5: 150.000MB/s transfers >> da5: Command Queueing enabled >> da5: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da8 at mps0 bus 0 scbus0 target 19 lun 0 >> da8:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6 device >> da8: 300.000MB/s transfers >> da8: Command Queueing enabled >> da8: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >> da9 at mps0 bus 0 scbus0 target 20 lun 0 >> da9:<ATA WDC WD800JD-60LU 1D07> Fixed Direct Access SCSI-6 device >> da9: 300.000MB/s transfers >> da9: Command Queueing enabled >> da9: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >> da11 at mps0 bus 0 scbus0 target 22 lun 0 >> da11:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >> da11: 150.000MB/s transfers >> da11: Command Queueing enabled >> da11: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da12 at mps0 bus 0 scbus0 target 23 lun 0 >> da12:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >> da12: 150.000MB/s transfers >> da12: Command Queueing enabled >> da12: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da13 at mps0 bus 0 scbus0 target 24 lun 0 >> da13:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >> da13: 150.000MB/s transfers >> da13: Command Queueing enabled >> da13: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da14 at mps0 bus 0 scbus0 target 27 lun 0 >> da14:<ATA ST3250310AS B> Fixed Direct Access SCSI-6 device >> da14: 300.000MB/s transfers >> da14: Command Queueing enabled >> da14: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> da15 at mps0 bus 0 scbus0 target 28 lun 0 >> da15:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6 device >> da15: 150.000MB/s transfers >> da15: Command Queueing enabled >> da15: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> ses0 at mps0 bus 0 scbus0 target 16 lun 0 >> ses0:<LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device >> ses0: 600.000MB/s transfers >> ses0: Command Queueing enabled >> ses0: SCSI-3 SES Device >> ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 >> ada0:<ST3808110AS 3.AJJ> ATA-7 SATA 1.x device >> ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) >> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) >> ada0: Previously was known as ad4 >> cd0 at ahcich2 bus 0 scbus3 target 0 lun 0 >> SMP: AP CPU #3 Launched! >> cd0:<TSSTcorp CDDVDW SN-208BB SB00> Removable CD-ROM SCSI-0 device >> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO >> 8192bytes) >> cd0: Attempt to query device size failed: NOT READY, Medium not present >> - tray closed >> SMP: AP CPU #2 Launched! >> SMP: AP CPU #1 Launched! >> da6 at mps0 bus 0 scbus0 target 17 lun 0 >> da6:<ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6 device >> da6: 150.000MB/s transfers >> da6: Command Queueing enabled >> da6: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >> da7 at mps0 bus 0 scbus0 target 18 lun 0 >> da7:<ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6 device >> da7: 150.000MB/s transfers >> da7: Command Queueing enabled >> da7: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) >> da10 at mps0 bus 0 scbus0 target 21 lun 0 >> da10:<ATA GB0250EAFJF HPG6> Fixed Direct Access SCSI-6 device >> da10: 300.000MB/s transfers >> da10: Command Queueing enabled >> da10: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) >> GEOM: da15s1: geometry does not match label (16h,63s != 255h,63s). >> uhub1: 2 ports with 2 removable, self powered >> uhub0: 2 ports with 2 removable, self powered >> Root mount waiting for: usbus1 usbus0 >> ugen0.2:<vendor 0x8087> at usbus0 >> uhub2:<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> >> on usbus0 >> ugen1.2:<vendor 0x8087> at usbus1 >> uhub3:<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> >> on usbus1 >> Root mount waiting for: usbus1 usbus0 >> uhub3: 6 ports with 6 removable, self powered >> uhub2: 6 ports with 6 removable, self powered >> ugen0.3:<Winbond Electronics Corp> at usbus0 >> ums0:<Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, >> rev 1.10/0.01, addr 3> on usbus0 >> ums0: 3 buttons and [Z] coordinates ID=0 >> ukbd0:<Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, >> rev 1.10/0.01, addr 3> on usbus0 >> kbd2 at ukbd0 >> Trying to mount root from ufs:/dev/ada0p2 [rw]... >> em0: link state changed to UP >> >> thanks for your work. >> >> regards >> Johan >> >> >> >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable- >> unsubscribe@freebsd.org" Ok i will try the patch, no hurry, i am back at the office on monday... regards Johan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F2BF93F.4060407>