Date: Sat, 10 Mar 2012 20:15:09 -0800 From: matt <sendtomatt@gmail.com> To: Sevan / Venture37 <venture37@gmail.com> Cc: freebsd-wireless@freebsd.org Subject: Re: Please Test: Updated Ral Driver Patch for rt2860/rt3090 Message-ID: <4F5C26CD.70701@gmail.com> In-Reply-To: <4F5C0C86.7040503@gmail.com> References: <CA%2BCYCL-d1hCzQK48EzPjgRu3UFO9EWMn-O%2B3V8%2B9cNrQE2s%2ByQ@mail.gmail.com> <4F41DDE8.6060004@gmail.com> <CAJ-VmonaRy0HyaoborYg=CEbAwKGHXZooi8k5qC8781Pe7591A@mail.gmail.com> <4F48166A.5040301@gmail.com> <CAJ-VmomQiwjH-nDmWJA=pg-gcgV9Djf0eCM940UvaXW_g030XQ@mail.gmail.com> <CA%2BCYCL-6=03MvCCKq4z5aePqLPWzjAQZmHAKDXwNA8f5Gawu7A@mail.gmail.com> <4F4828C0.6020705@gmail.com> <CA%2BCYCL_o=mDA-P66nTdPR65=MwML4FghxRpNzowDE-eXNWmD6g@mail.gmail.com> <4F5A8023.1090705@gmail.com> <CAJ-Vmonu4SUVOdfbTdAnmGfQ=T-PtcAbd-PCoQ0PV_ttwF5Scw@mail.gmail.com> <4F5AC7CF.3090409@gmail.com> <4F5C0C86.7040503@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/10/12 18:23, Sevan / Venture37 wrote: > On 10/03/2012 03:17, matt wrote: >> Hi Folks! Thanks for the patience :) > > Hi Matt, > >> Here's the patch for HEAD: >> >> https://docs.google.com/open?id=0B6YlMzJxarGbR1lSZ0hnTEFSREt6MU1MbGFKeURhUQ >> > > The patch you linked to above had several errors which prevented it > from being built, I've cleaned things up & added them to a mercurial > repo https://bitbucket.org/sevan/ral/overview (you're welcome to have > write access Matt if you don't plan on hosting the files elsewhere) > > both directories just need to be copied to /usr/src/sys > >> You will see an invalid eeprom low-noise amplifier gain for low-noise >> amplifiers you don't have. If it doesn't attach at all, send me your PCI >> ids and we can add them to the attach code and see if they work. >> >> My expectation is everything from rt2860-rt3090 at least will work. > > The driver attaches but ifconfig wlan0 scan doesn't show any access > points > > ral0: <Ralink Technology RT2790> mem 0xf7f00000-0xf7f0ffff irq 17 at > device 0.0 on pci3 > ral0: invalid EEPROM LNA gain #2: 0x00 > ral0: invalid EEPROM LNA gain #3: 0x00 > ral0: invalid EEPROM powersave level > ral0: MAC/BBP RT2860 (rev 0x28720200), RF RT3022 2.4G 2T2R > ral0: skip channel 10, could not find extension channel > ral0: skip channel 11, could not find extension channel > ral0: skip channel 12, could not find extension channel > ral0: skip channel 13, could not find extension channel > ral0: skip channel 14, could not find extension channel > ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > ral0: 2T2R > ral0: 11ng MCS 20MHz > ral0: MCS 0-7: 6.5Mbps - 65Mbps > ral0: MCS 8-15: 13Mbps - 130Mbps > ral0: 11ng MCS 20MHz SGI > ral0: MCS 0-7: 7Mbps - 72Mbps > ral0: MCS 8-15: 14.5Mbps - 144.5Mbps > ral0: 11ng MCS 40MHz: > ral0: MCS 0-7: 13.5Mbps - 135Mbps > ral0: MCS 8-15: 27Mbps - 270Mbps > ral0: 11ng MCS 40MHz SGI: > ral0: MCS 0-7: 15Mbps - 150Mbps > ral0: MCS 8-15: 30Mbps - 300Mbps > > Sevan / Venture37 > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to > "freebsd-wireless-unsubscribe@freebsd.org" > Re access points...try "ifconfig wlan0 create wlandev ral0" ifconfig ral0 up (just in case...) ifconfig wlan0 up sleep 1 ifconfig wlan0 scan I have seen it take a second for results to be available, i.e. "up scan" returns no list. Re: errors: Did you by chance build the module along with kernel or separately? Matt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F5C26CD.70701>