Date: Wed, 09 May 2012 11:01:04 -0400 From: Mike Tancsa <mike@sentex.net> To: Daniel Braniss <danny@cs.huji.ac.il> Cc: freebsd-hackers@freebsd.org Subject: Re: PCEngines alix.6 with dual SIM Message-ID: <4FAA86B0.4070202@sentex.net> In-Reply-To: <E1SS89T-000H1R-W1@kabab.cs.huji.ac.il> References: <E1SS89T-000H1R-W1@kabab.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On 5/9/2012 10:46 AM, Daniel Braniss wrote: > Hi, > after a long time, I finaly got around trying to get the GSM/UMTS working, > but so far it thinks it's a mass storage! > > ugen0.2: <USB MMC Storage Sierra Wireless> at usbus0, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0110 > bDeviceClass = 0x0000 > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1199 > idProduct = 0x0fff > bcdDevice = 0x0000 > iManufacturer = 0x0001 <Sierra Wireless> > iProduct = 0x0002 <USB MMC Storage> > iSerialNumber = 0x0003 <SWOC22905731> > bNumConfigurations = 0x0001 > > I added > U3G_DEV(SIERRA, TRUINSTALL, 0), > > to sys/dev/usb/serial/u3g.c but that did not help Normally its U3GINIT_SIERRA in the driver I have in stable. If you do a camcontrol eject pass0 does it put the device into modem mode ? If you add hw.usb.u3g.debug=1 to /boot/loader.conf what does the dmesg look like. I have used a number of sierra devices in the past with the Alix boxes and they do work. Not sure about your particular unit. ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FAA86B0.4070202>