Date: Sat, 26 Jan 2002 00:00:29 +0000 From: Neil McGann <neil@neilmcgann.co.uk> To: Kent Stewart <kstewart@owt.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: UDMA and 100Mbit NIC speed issues Message-ID: <5.1.0.14.0.20020125235403.00a1f930@pop.ntlworld.com> In-Reply-To: <3C51EB15.5070407@owt.com> References: <5.1.0.14.0.20020125204321.00a0f4c0@pop.ntlworld.com> <3C51D185.2090600@owt.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 15:32 25/01/02 -0800, you wrote: >Kent Stewart wrote: > >I am curious what kind of setup you have. Since we are not seeing the same >transfer rate between FreeBSD machines, I have to assume you have >something configured differently than I do. An ifconfig on coral shows > >sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255 > ether 00:07:95:0b:0c:31 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > >This is basically a default setup. The only difference on opal is the >internal ether address and IP. > >I have all of my systems hooked up to 10/100 baseT switches and are all >running full-duplex. They are on different floors. I have nomad and opal >on the same switch and coral is in the basement and on the second switch. >Nomad uses an Intel Pro 10/100+ and coral and opal are using the SiS-900 >builtin NIC, which was just added to the 4.5 support. ifconfig shows identical parameters to yours, except I have inet6 addresses too (it's an out-of-the-box stock config, I haven't really tweaked it much yet). Does hw.atamodes show you definitely dma? Neil To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20020125235403.00a1f930>