Date: Tue, 11 Dec 2012 10:48:13 -0500 From: Mike Tancsa <mike@sentex.net> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: USB3 SATA enclosure Message-ID: <50C755BD.7020306@sentex.net> In-Reply-To: <201212111249.25580.hselasky@c2i.net> References: <50C65439.8010408@sentex.net> <201212110818.28963.hselasky@c2i.net> <50C71A33.6030109@sentex.net> <201212111249.25580.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/11/2012 6:49 AM, Hans Petter Selasky wrote: > On Tuesday 11 December 2012 12:34:11 Mike Tancsa wrote: >> hw.usb.timings.extra_power_up_time: 20 >> hw.usb.timings.resume_recovery: 50 >> hw.usb.timings.resume_wait: 50 >> hw.usb.timings.resume_delay: 250 >> hw.usb.timings.set_address_settle: 10 >> hw.usb.timings.port_resume_delay: 40 >> hw.usb.timings.port_powerup_delay: 300 >> hw.usb.timings.port_reset_recovery: 250 >> hw.usb.timings.port_root_reset_delay: 250 >> hw.usb.timings.port_reset_delay: 50 > > Try to tune these up, one by one. I doubled them all, and still only 0(cage)# usbconfig ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x17ab vendor 0x0b05> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen1.3: <WinTV HVR-950 Hauppauge> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.3: <USB 3.0 SATA Bridge VIA Labs, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.4: <product 0x1400 vendor 0x04d9> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50C755BD.7020306>