Date: Tue, 22 Jan 2013 14:46:48 -0600 From: Paul Keusemann <pkeusem@visi.com> To: freebsd-net@freebsd.org Subject: Cas driver fails to load first time after boot. Message-ID: <50FEFAB8.1070006@visi.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------030400010508050204050003
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I've got a Dell R200 which I'm trying to build into a gateway with a Sun
QGE (501-6738-10). The cas driver fails to load the first time I try to
load it but succeeds the second time. Is this a problem with the card,
the driver, my karma?
Initially, tried to install FreeBSD-9.1- Release but booting the
installation DVD hangs after failing to attach cas0. I was able to
successfully install FreeBSD-8.3-Release which apparently does not have
the cas driver built into the installer kernel.
The first time I try to load the cas module after booting results in the
following output:
# kldload -v if_cas
Loaded if_cas, id=2
with the following logged to /var/log/messages:
Jan 22 13:48:27 lucid kernel: cas0: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
Jan 22 13:48:27 lucid kernel: cas0: attaching PHYs failed
Jan 22 13:48:27 lucid kernel: cas0: could not be attached
Jan 22 13:48:27 lucid kernel: device_attach: cas0 attach returned 6
Jan 22 13:48:27 lucid kernel: cas1: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
Jan 22 13:48:27 lucid kernel: cas1: attaching PHYs failed
Jan 22 13:48:28 lucid kernel: cas1: could not be attached
Jan 22 13:48:28 lucid kernel: device_attach: cas1 attach returned 6
Jan 22 13:48:28 lucid kernel: cas2: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
Jan 22 13:48:28 lucid kernel: miibus2: <MII bus> on cas2
Jan 22 13:48:28 lucid kernel: nsgphy0: <DP83865 10/100/1000 media
interface> PHY 1 on miibus2
Jan 22 13:48:28 lucid kernel: nsgphy0: none, 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master,auto, auto-flow
Jan 22 13:48:28 lucid kernel: cas2: 16kB RX FIFO, 9kB TX FIFO
Jan 22 13:48:28 lucid kernel: cas2: Ethernet address: 00:14:4f:25:ca:12
Jan 22 13:48:28 lucid kernel: cas2: [FILTER]
Jan 22 13:48:28 lucid kernel: cas3: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
Jan 22 13:48:28 lucid kernel: cas3: attaching PHYs failed
Jan 22 13:48:28 lucid kernel: cas3: could not be attached
Jan 22 13:48:28 lucid kernel: device_attach: cas3 attach returned 6
If I unload the cas driver, I get the following in /var/log/messages:
Jan 22 14:03:42 lucid kernel: nsgphy0: detached
Jan 22 14:03:42 lucid kernel: miibus2: detached
Jan 22 14:03:42 lucid kernel: cas2: detached
Jan 22 14:03:42 lucid kernel: pci4: <network, ethernet> at device 2.0
(no driver attached)
The second time I try to load the cas kernel module after booting
results in the following output:
# kldload -v if_cas
Loaded if_cas, id=2
and the following logged to /var/log/messages:
Jan 22 14:04:33 lucid kernel: cas0: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
Jan 22 14:04:33 lucid kernel: miibus2: <MII bus> on cas0
Jan 22 14:04:33 lucid kernel: nsgphy0: <DP83865 10/100/1000 media
interface> PHY 1 on miibus2
Jan 22 14:04:33 lucid kernel: nsgphy0: none, 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master,auto, auto-flow
Jan 22 14:04:33 lucid kernel: cas0: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:04:33 lucid kernel: cas0: Ethernet address: 00:14:4f:25:ca:10
Jan 22 14:04:33 lucid kernel: cas0: [FILTER]
Jan 22 14:04:33 lucid kernel: cas1: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
Jan 22 14:04:33 lucid kernel: miibus3: <MII bus> on cas1
Jan 22 14:04:33 lucid kernel: nsgphy1: <DP83865 10/100/1000 media
interface> PHY 1 on miibus3
Jan 22 14:04:33 lucid kernel: nsgphy1: none, 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master,auto, auto-flow
Jan 22 14:04:33 lucid kernel: cas1: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:04:33 lucid kernel: cas1: Ethernet address: 00:14:4f:25:ca:11
Jan 22 14:04:33 lucid kernel: cas1: [FILTER]
Jan 22 14:04:33 lucid kernel: cas2: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
Jan 22 14:04:33 lucid kernel: miibus4: <MII bus> on cas2
Jan 22 14:04:33 lucid kernel: nsgphy2: <DP83865 10/100/1000 media
interface> PHY 1 on miibus4
Jan 22 14:04:33 lucid kernel: nsgphy2: none, 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master,auto, auto-flow
Jan 22 14:04:33 lucid kernel: cas2: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:04:33 lucid kernel: cas2: Ethernet address: 00:14:4f:25:ca:12
Jan 22 14:04:33 lucid kernel: cas2: [FILTER]
Jan 22 14:04:33 lucid kernel: cas3: <NS DP83065 Saturn Gigabit Ethernet>
mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
Jan 22 14:04:33 lucid kernel: miibus5: <MII bus> on cas3
Jan 22 14:04:33 lucid kernel: nsgphy3: <DP83865 10/100/1000 media
interface> PHY 1 on miibus5
Jan 22 14:04:33 lucid kernel: nsgphy3: none, 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master,auto, auto-flow
Jan 22 14:04:33 lucid kernel: cas3: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:04:33 lucid kernel: cas3: Ethernet address: 00:14:4f:25:ca:13
Jan 22 14:04:33 lucid kernel: cas3: [FILTER]
The following are attached:
/var/run/dmesg.boot
dmesg output after the second attempt to load the cas driver.
/var/log/messages after the second attemp to load the cas driver.
--
Paul Keusemann pkeusem@visi.com
4266 Joppa Court (952) 894-7805
Savage, MN 55378
--------------030400010508050204050003
Content-Type: text/plain; charset=us-ascii;
name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.boot"
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE #0: Mon Apr 9 21:23:18 UTC 2012
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2133.42-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4099231744 (3909 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 2.0 on pci3
pci4: <PCI bus> on pcib4
pci4: <network, ethernet> at device 0.0 (no driver attached)
pci4: <network, ethernet> at device 1.0 (no driver attached)
pci4: <network, ethernet> at device 2.0 (no driver attached)
pci4: <network, ethernet> at device 3.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf3f0000-0xdf3fffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:19:b9:fa:82:51
bge0: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf4f0000-0xdf4fffff irq 17 at device 0.0 on pci6
bge1: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:19:b9:fa:82:52
bge1: [ITHREAD]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xdc60-0xdc7f irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xdc80-0xdc9f irq 20 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf2ffc00-0xdf2fffff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xd0000000-0xd7ffffff,0xdf5f0000-0xdf5fffff irq 19 at device 5.0 on pci7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xdc30-0xdc37,0xdc28-0xdc2b,0xdc38-0xdc3f,0xdc2c-0xdc2f,0xdc40-0xdc4f,0xdc50-0xdc5f irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
ata3: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad4: 76293MB <WDC WD800AAJS-18TDA1 01.00A04> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE> at ata2-slave UDMA33 SATA 1.5Gb/s
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <vendor 0x04b4> at usbus3
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus3
uhub4: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
--------------030400010508050204050003
Content-Type: text/plain; charset=us-ascii;
name="dmesg.out"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.out"
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE #0: Mon Apr 9 21:23:18 UTC 2012
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2133.42-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4099231744 (3909 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 2.0 on pci3
pci4: <PCI bus> on pcib4
pci4: <network, ethernet> at device 0.0 (no driver attached)
pci4: <network, ethernet> at device 1.0 (no driver attached)
pci4: <network, ethernet> at device 2.0 (no driver attached)
pci4: <network, ethernet> at device 3.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf3f0000-0xdf3fffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:19:b9:fa:82:51
bge0: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf4f0000-0xdf4fffff irq 17 at device 0.0 on pci6
bge1: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:19:b9:fa:82:52
bge1: [ITHREAD]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xdc60-0xdc7f irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xdc80-0xdc9f irq 20 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf2ffc00-0xdf2fffff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xd0000000-0xd7ffffff,0xdf5f0000-0xdf5fffff irq 19 at device 5.0 on pci7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xdc30-0xdc37,0xdc28-0xdc2b,0xdc38-0xdc3f,0xdc2c-0xdc2f,0xdc40-0xdc4f,0xdc50-0xdc5f irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
ata3: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad4: 76293MB <WDC WD800AAJS-18TDA1 01.00A04> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE> at ata2-slave UDMA33 SATA 1.5Gb/s
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <vendor 0x04b4> at usbus3
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus3
uhub4: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
bge0: link state changed to UP
cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
miibus2: <MII bus> on cas0
nsgphy0: <DP83865 10/100/1000 media interface> PHY 1 on miibus2
nsgphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas0: 16kB RX FIFO, 9kB TX FIFO
cas0: Ethernet address: 00:14:4f:25:ca:10
cas0: [FILTER]
cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
miibus3: <MII bus> on cas1
nsgphy1: <DP83865 10/100/1000 media interface> PHY 1 on miibus3
nsgphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas1: 16kB RX FIFO, 9kB TX FIFO
cas1: Ethernet address: 00:14:4f:25:ca:11
cas1: [FILTER]
cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
miibus4: <MII bus> on cas2
nsgphy2: <DP83865 10/100/1000 media interface> PHY 1 on miibus4
nsgphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas2: 16kB RX FIFO, 9kB TX FIFO
cas2: Ethernet address: 00:14:4f:25:ca:12
cas2: [FILTER]
cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
miibus5: <MII bus> on cas3
nsgphy3: <DP83865 10/100/1000 media interface> PHY 1 on miibus5
nsgphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas3: 16kB RX FIFO, 9kB TX FIFO
cas3: Ethernet address: 00:14:4f:25:ca:13
cas3: [FILTER]
nsgphy0: detached
miibus2: detached
cas0: detached
pci4: <network, ethernet> at device 0.0 (no driver attached)
nsgphy1: detached
miibus3: detached
cas1: detached
pci4: <network, ethernet> at device 1.0 (no driver attached)
nsgphy2: detached
miibus4: detached
cas2: detached
pci4: <network, ethernet> at device 2.0 (no driver attached)
nsgphy3: detached
miibus5: detached
cas3: detached
pci4: <network, ethernet> at device 3.0 (no driver attached)
cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
miibus2: <MII bus> on cas0
nsgphy0: <DP83865 10/100/1000 media interface> PHY 1 on miibus2
nsgphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas0: 16kB RX FIFO, 9kB TX FIFO
cas0: Ethernet address: 00:14:4f:25:ca:10
cas0: [FILTER]
cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
miibus3: <MII bus> on cas1
nsgphy1: <DP83865 10/100/1000 media interface> PHY 1 on miibus3
nsgphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas1: 16kB RX FIFO, 9kB TX FIFO
cas1: Ethernet address: 00:14:4f:25:ca:11
cas1: [FILTER]
cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
miibus4: <MII bus> on cas2
nsgphy2: <DP83865 10/100/1000 media interface> PHY 1 on miibus4
nsgphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas2: 16kB RX FIFO, 9kB TX FIFO
cas2: Ethernet address: 00:14:4f:25:ca:12
cas2: [FILTER]
cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
miibus5: <MII bus> on cas3
nsgphy3: <DP83865 10/100/1000 media interface> PHY 1 on miibus5
nsgphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas3: 16kB RX FIFO, 9kB TX FIFO
cas3: Ethernet address: 00:14:4f:25:ca:13
cas3: [FILTER]
--------------030400010508050204050003
Content-Type: text/plain; charset=us-ascii;
name="messages"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="messages"
Jan 22 14:09:35 lucid kernel: Copyright (c) 1992-2012 The FreeBSD Project.
Jan 22 14:09:35 lucid kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Jan 22 14:09:35 lucid kernel: The Regents of the University of California. All rights reserved.
Jan 22 14:09:35 lucid kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Jan 22 14:09:35 lucid kernel: FreeBSD 8.3-RELEASE #0: Mon Apr 9 21:23:18 UTC 2012
Jan 22 14:09:35 lucid kernel: root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Jan 22 14:09:35 lucid kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Jan 22 14:09:35 lucid kernel: CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2133.42-MHz K8-class CPU)
Jan 22 14:09:35 lucid kernel: Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Jan 22 14:09:35 lucid kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Jan 22 14:09:35 lucid kernel: Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
Jan 22 14:09:35 lucid kernel: AMD Features=0x20100800<SYSCALL,NX,LM>
Jan 22 14:09:35 lucid kernel: AMD Features2=0x1<LAHF>
Jan 22 14:09:35 lucid kernel: TSC: P-state invariant
Jan 22 14:09:35 lucid kernel: real memory = 4294967296 (4096 MB)
Jan 22 14:09:35 lucid kernel: avail memory = 4099231744 (3909 MB)
Jan 22 14:09:35 lucid kernel: ACPI APIC Table: <DELL PE_SC3 >
Jan 22 14:09:35 lucid kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Jan 22 14:09:35 lucid kernel: FreeBSD/SMP: 1 package(s) x 4 core(s)
Jan 22 14:09:35 lucid kernel: cpu0 (BSP): APIC ID: 0
Jan 22 14:09:35 lucid kernel: cpu1 (AP): APIC ID: 1
Jan 22 14:09:35 lucid kernel: cpu2 (AP): APIC ID: 2
Jan 22 14:09:35 lucid kernel: cpu3 (AP): APIC ID: 3
Jan 22 14:09:35 lucid kernel: ioapic0: Changing APIC ID to 4
Jan 22 14:09:35 lucid kernel: ioapic1: Changing APIC ID to 5
Jan 22 14:09:35 lucid kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Jan 22 14:09:35 lucid kernel: ioapic1 <Version 2.0> irqs 32-55 on motherboard
Jan 22 14:09:35 lucid kernel: kbd1 at kbdmux0
Jan 22 14:09:35 lucid kernel: acpi0: <DELL PE_SC3> on motherboard
Jan 22 14:09:35 lucid kernel: acpi0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: acpi0: Power Button (fixed)
Jan 22 14:09:35 lucid kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Jan 22 14:09:35 lucid kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Jan 22 14:09:35 lucid kernel: cpu0: <ACPI CPU> on acpi0
Jan 22 14:09:35 lucid kernel: cpu1: <ACPI CPU> on acpi0
Jan 22 14:09:35 lucid kernel: cpu2: <ACPI CPU> on acpi0
Jan 22 14:09:35 lucid kernel: cpu3: <ACPI CPU> on acpi0
Jan 22 14:09:35 lucid kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jan 22 14:09:35 lucid kernel: pci0: <ACPI PCI bus> on pcib0
Jan 22 14:09:35 lucid kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
Jan 22 14:09:35 lucid kernel: pci1: <ACPI PCI bus> on pcib1
Jan 22 14:09:35 lucid kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Jan 22 14:09:35 lucid kernel: pci2: <ACPI PCI bus> on pcib2
Jan 22 14:09:35 lucid kernel: pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
Jan 22 14:09:35 lucid kernel: pci3: <ACPI PCI bus> on pcib3
Jan 22 14:09:35 lucid kernel: pcib4: <PCI-PCI bridge> at device 2.0 on pci3
Jan 22 14:09:35 lucid kernel: pci4: <PCI bus> on pcib4
Jan 22 14:09:35 lucid kernel: pci4: <network, ethernet> at device 0.0 (no driver attached)
Jan 22 14:09:35 lucid kernel: pci4: <network, ethernet> at device 1.0 (no driver attached)
Jan 22 14:09:35 lucid kernel: pci4: <network, ethernet> at device 2.0 (no driver attached)
Jan 22 14:09:35 lucid kernel: pci4: <network, ethernet> at device 3.0 (no driver attached)
Jan 22 14:09:35 lucid kernel: pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
Jan 22 14:09:35 lucid kernel: pci5: <ACPI PCI bus> on pcib5
Jan 22 14:09:35 lucid kernel: bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf3f0000-0xdf3fffff irq 16 at device 0.0 on pci5
Jan 22 14:09:35 lucid kernel: bge0: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
Jan 22 14:09:35 lucid kernel: miibus0: <MII bus> on bge0
Jan 22 14:09:35 lucid kernel: brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
Jan 22 14:09:35 lucid kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:09:35 lucid kernel: bge0: Ethernet address: 00:19:b9:fa:82:51
Jan 22 14:09:35 lucid kernel: bge0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
Jan 22 14:09:35 lucid kernel: pci6: <ACPI PCI bus> on pcib6
Jan 22 14:09:35 lucid kernel: bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf4f0000-0xdf4fffff irq 17 at device 0.0 on pci6
Jan 22 14:09:35 lucid kernel: bge1: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
Jan 22 14:09:35 lucid kernel: miibus1: <MII bus> on bge1
Jan 22 14:09:35 lucid kernel: brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
Jan 22 14:09:35 lucid kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:09:35 lucid kernel: bge1: Ethernet address: 00:19:b9:fa:82:52
Jan 22 14:09:35 lucid kernel: bge1: [ITHREAD]
Jan 22 14:09:35 lucid kernel: uhci0: <Intel 82801I (ICH9) USB controller> port 0xdc60-0xdc7f irq 21 at device 29.0 on pci0
Jan 22 14:09:35 lucid kernel: uhci0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
Jan 22 14:09:35 lucid kernel: uhci1: <Intel 82801I (ICH9) USB controller> port 0xdc80-0xdc9f irq 20 at device 29.1 on pci0
Jan 22 14:09:35 lucid kernel: uhci1: [ITHREAD]
Jan 22 14:09:35 lucid kernel: usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
Jan 22 14:09:35 lucid kernel: uhci2: <Intel 82801I (ICH9) USB controller> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0
Jan 22 14:09:35 lucid kernel: uhci2: [ITHREAD]
Jan 22 14:09:35 lucid kernel: usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
Jan 22 14:09:35 lucid kernel: ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf2ffc00-0xdf2fffff irq 21 at device 29.7 on pci0
Jan 22 14:09:35 lucid kernel: ehci0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: usbus3: EHCI version 1.0
Jan 22 14:09:35 lucid kernel: usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
Jan 22 14:09:35 lucid kernel: pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Jan 22 14:09:35 lucid kernel: pci7: <ACPI PCI bus> on pcib7
Jan 22 14:09:35 lucid kernel: vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xd0000000-0xd7ffffff,0xdf5f0000-0xdf5fffff irq 19 at device 5.0 on pci7
Jan 22 14:09:35 lucid kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Jan 22 14:09:35 lucid kernel: isa0: <ISA bus> on isab0
Jan 22 14:09:35 lucid kernel: atapci0: <Intel ICH9 SATA300 controller> port 0xdc30-0xdc37,0xdc28-0xdc2b,0xdc38-0xdc3f,0xdc2c-0xdc2f,0xdc40-0xdc4f,0xdc50-0xdc5f irq 23 at device 31.2 on pci0
Jan 22 14:09:35 lucid kernel: atapci0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: ata2: <ATA channel> at channel 0 on atapci0
Jan 22 14:09:35 lucid kernel: ata2: [ITHREAD]
Jan 22 14:09:35 lucid kernel: ata3: <ATA channel> at channel 1 on atapci0
Jan 22 14:09:35 lucid kernel: ata3: [ITHREAD]
Jan 22 14:09:35 lucid kernel: acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Jan 22 14:09:35 lucid kernel: Timecounter "HPET" frequency 14318180 Hz quality 900
Jan 22 14:09:35 lucid kernel: atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Jan 22 14:09:35 lucid kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Jan 22 14:09:35 lucid kernel: fdc0: does not respond
Jan 22 14:09:35 lucid kernel: device_attach: fdc0 attach returned 6
Jan 22 14:09:35 lucid kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Jan 22 14:09:35 lucid kernel: uart0: [FILTER]
Jan 22 14:09:35 lucid kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Jan 22 14:09:35 lucid kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Jan 22 14:09:35 lucid kernel: kbd0 at atkbd0
Jan 22 14:09:35 lucid kernel: atkbd0: [GIANT-LOCKED]
Jan 22 14:09:35 lucid kernel: atkbd0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Jan 22 14:09:35 lucid kernel: psm0: [GIANT-LOCKED]
Jan 22 14:09:35 lucid kernel: psm0: [ITHREAD]
Jan 22 14:09:35 lucid kernel: psm0: model Generic PS/2 mouse, device ID 0
Jan 22 14:09:35 lucid kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
Jan 22 14:09:35 lucid kernel: sc0: <System console> at flags 0x100 on isa0
Jan 22 14:09:35 lucid kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jan 22 14:09:35 lucid kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jan 22 14:09:35 lucid kernel: ppc0: cannot reserve I/O port range
Jan 22 14:09:35 lucid kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Jan 22 14:09:35 lucid kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Jan 22 14:09:35 lucid kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1
Jan 22 14:09:35 lucid kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Jan 22 14:09:35 lucid kernel: est2: <Enhanced SpeedStep Frequency Control> on cpu2
Jan 22 14:09:35 lucid kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2
Jan 22 14:09:35 lucid kernel: est3: <Enhanced SpeedStep Frequency Control> on cpu3
Jan 22 14:09:35 lucid kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3
Jan 22 14:09:35 lucid kernel: Timecounters tick every 1.000 msec
Jan 22 14:09:35 lucid kernel: usbus0: 12Mbps Full Speed USB v1.0
Jan 22 14:09:35 lucid kernel: usbus1: 12Mbps Full Speed USB v1.0
Jan 22 14:09:35 lucid kernel: usbus2: 12Mbps Full Speed USB v1.0
Jan 22 14:09:35 lucid kernel: usbus3: 480Mbps High Speed USB v2.0
Jan 22 14:09:35 lucid kernel: ad4: 76293MB <WDC WD800AAJS-18TDA1 01.00A04> at ata2-master UDMA100 SATA 3Gb/s
Jan 22 14:09:35 lucid kernel: ugen0.1: <Intel> at usbus0
Jan 22 14:09:35 lucid kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Jan 22 14:09:35 lucid kernel: ugen1.1: <Intel> at usbus1
Jan 22 14:09:35 lucid kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Jan 22 14:09:35 lucid kernel: ugen2.1: <Intel> at usbus2
Jan 22 14:09:35 lucid kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Jan 22 14:09:35 lucid kernel: ugen3.1: <Intel> at usbus3
Jan 22 14:09:35 lucid kernel: uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Jan 22 14:09:35 lucid kernel: acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE> at ata2-slave UDMA33 SATA 1.5Gb/s
Jan 22 14:09:35 lucid kernel: SMP: AP CPU #3 Launched!
Jan 22 14:09:35 lucid kernel: SMP: AP CPU #1 Launched!
Jan 22 14:09:35 lucid kernel: SMP: AP CPU #2 Launched!
Jan 22 14:09:35 lucid kernel: Root mount waiting for: usbus3 usbus2 usbus1 usbus0
Jan 22 14:09:35 lucid kernel: uhub0: 2 ports with 2 removable, self powered
Jan 22 14:09:35 lucid kernel: uhub1: 2 ports with 2 removable, self powered
Jan 22 14:09:35 lucid kernel: uhub2: 2 ports with 2 removable, self powered
Jan 22 14:09:35 lucid kernel: Root mount waiting for: usbus3
Jan 22 14:09:35 lucid kernel: Root mount waiting for: usbus3
Jan 22 14:09:35 lucid kernel: uhub3: 6 ports with 6 removable, self powered
Jan 22 14:09:35 lucid kernel: Root mount waiting for: usbus3
Jan 22 14:09:35 lucid kernel: ugen3.2: <vendor 0x04b4> at usbus3
Jan 22 14:09:35 lucid kernel: uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus3
Jan 22 14:09:35 lucid kernel: uhub4: 4 ports with 4 removable, self powered
Jan 22 14:09:35 lucid kernel: Trying to mount root from ufs:/dev/ad4s1a
Jan 22 14:09:37 lucid kernel: bge0: link state changed to UP
Jan 22 14:10:09 lucid kernel: cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
Jan 22 14:10:09 lucid kernel: miibus2: <MII bus> on cas0
Jan 22 14:10:09 lucid kernel: nsgphy0: <DP83865 10/100/1000 media interface> PHY 1 on miibus2
Jan 22 14:10:09 lucid kernel: nsgphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:10:09 lucid kernel: cas0: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:10:09 lucid kernel: cas0: Ethernet address: 00:14:4f:25:ca:10
Jan 22 14:10:09 lucid kernel: cas0: [FILTER]
Jan 22 14:10:09 lucid kernel: cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
Jan 22 14:10:09 lucid kernel: miibus3: <MII bus> on cas1
Jan 22 14:10:09 lucid kernel: nsgphy1: <DP83865 10/100/1000 media interface> PHY 1 on miibus3
Jan 22 14:10:09 lucid kernel: nsgphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:10:09 lucid kernel: cas1: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:10:09 lucid kernel: cas1: Ethernet address: 00:14:4f:25:ca:11
Jan 22 14:10:09 lucid kernel: cas1: [FILTER]
Jan 22 14:10:09 lucid kernel: cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
Jan 22 14:10:09 lucid kernel: miibus4: <MII bus> on cas2
Jan 22 14:10:09 lucid kernel: nsgphy2: <DP83865 10/100/1000 media interface> PHY 1 on miibus4
Jan 22 14:10:09 lucid kernel: nsgphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:10:09 lucid kernel: cas2: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:10:09 lucid kernel: cas2: Ethernet address: 00:14:4f:25:ca:12
Jan 22 14:10:09 lucid kernel: cas2: [FILTER]
Jan 22 14:10:09 lucid kernel: cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
Jan 22 14:10:09 lucid kernel: miibus5: <MII bus> on cas3
Jan 22 14:10:09 lucid kernel: nsgphy3: <DP83865 10/100/1000 media interface> PHY 1 on miibus5
Jan 22 14:10:09 lucid kernel: nsgphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:10:09 lucid kernel: cas3: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:10:09 lucid kernel: cas3: Ethernet address: 00:14:4f:25:ca:13
Jan 22 14:10:09 lucid kernel: cas3: [FILTER]
Jan 22 14:16:14 lucid kernel: nsgphy0: detached
Jan 22 14:16:14 lucid kernel: miibus2: detached
Jan 22 14:16:14 lucid kernel: cas0: detached
Jan 22 14:16:14 lucid kernel: pci4: <network, ethernet> at device 0.0 (no driver attached)
Jan 22 14:16:14 lucid kernel: nsgphy1: detached
Jan 22 14:16:14 lucid kernel: miibus3: detached
Jan 22 14:16:14 lucid kernel: cas1: detached
Jan 22 14:16:14 lucid kernel: pci4: <network, ethernet> at device 1.0 (no driver attached)
Jan 22 14:16:14 lucid kernel: nsgphy2: detached
Jan 22 14:16:14 lucid kernel: miibus4: detached
Jan 22 14:16:14 lucid kernel: cas2: detached
Jan 22 14:16:14 lucid kernel: pci4: <network, ethernet> at device 2.0 (no driver attached)
Jan 22 14:16:14 lucid kernel: nsgphy3: detached
Jan 22 14:16:14 lucid kernel: miibus5: detached
Jan 22 14:16:14 lucid kernel: cas3: detached
Jan 22 14:16:14 lucid kernel: pci4: <network, ethernet> at device 3.0 (no driver attached)
Jan 22 14:17:02 lucid kernel: cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
Jan 22 14:17:02 lucid kernel: miibus2: <MII bus> on cas0
Jan 22 14:17:02 lucid kernel: nsgphy0: <DP83865 10/100/1000 media interface> PHY 1 on miibus2
Jan 22 14:17:02 lucid kernel: nsgphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:17:02 lucid kernel: cas0: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:17:02 lucid kernel: cas0: Ethernet address: 00:14:4f:25:ca:10
Jan 22 14:17:02 lucid kernel: cas0: [FILTER]
Jan 22 14:17:02 lucid kernel: cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
Jan 22 14:17:02 lucid kernel: miibus3: <MII bus> on cas1
Jan 22 14:17:02 lucid kernel: nsgphy1: <DP83865 10/100/1000 media interface> PHY 1 on miibus3
Jan 22 14:17:02 lucid kernel: nsgphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:17:02 lucid kernel: cas1: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:17:02 lucid kernel: cas1: Ethernet address: 00:14:4f:25:ca:11
Jan 22 14:17:02 lucid kernel: cas1: [FILTER]
Jan 22 14:17:02 lucid kernel: cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
Jan 22 14:17:02 lucid kernel: miibus4: <MII bus> on cas2
Jan 22 14:17:02 lucid kernel: nsgphy2: <DP83865 10/100/1000 media interface> PHY 1 on miibus4
Jan 22 14:17:02 lucid kernel: nsgphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:17:02 lucid kernel: cas2: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:17:02 lucid kernel: cas2: Ethernet address: 00:14:4f:25:ca:12
Jan 22 14:17:02 lucid kernel: cas2: [FILTER]
Jan 22 14:17:02 lucid kernel: cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
Jan 22 14:17:02 lucid kernel: miibus5: <MII bus> on cas3
Jan 22 14:17:02 lucid kernel: nsgphy3: <DP83865 10/100/1000 media interface> PHY 1 on miibus5
Jan 22 14:17:02 lucid kernel: nsgphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 22 14:17:02 lucid kernel: cas3: 16kB RX FIFO, 9kB TX FIFO
Jan 22 14:17:02 lucid kernel: cas3: Ethernet address: 00:14:4f:25:ca:13
Jan 22 14:17:02 lucid kernel: cas3: [FILTER]
--------------030400010508050204050003--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50FEFAB8.1070006>