Date: Fri, 22 Feb 2013 08:13:47 +0100 From: Werner Thie <werner@thieprojects.ch> To: Alie Tan <alie@affle.com> Cc: Tim Kientzle <tim@kientzle.com>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Unable to copy DTB into module directory Message-ID: <51271AAB.4080005@thieprojects.ch> In-Reply-To: <CANuCnH_zZWm2EpG58FU2k_FFierfe_QrZQDrZJ4ow%2BxkLkO=Fw@mail.gmail.com> References: <CANuCnH_4dxzBfVjxgX2FOtVKYm9BM0ZwdeDvp5-xPX8c5ggzHA@mail.gmail.com> <3A8BA2BC-6707-4309-B6E3-5B15712ED67D@kientzle.com> <FC5D35F7-0057-4EDE-B0EB-36492476D929@kientzle.com> <CANuCnH9owQNSosUMZDt0vw8%2BQS1HWNOXDWEQ7UobqO9Y7hwJCw@mail.gmail.com> <512716CE.7050600@thieprojects.ch> <CANuCnH_zZWm2EpG58FU2k_FFierfe_QrZQDrZJ4ow%2BxkLkO=Fw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2/22/13 8:07 AM, Alie Tan wrote: > > On Fri, Feb 22, 2013 at 2:57 PM, Werner Thie <werner@thieprojects.ch > <mailto:werner@thieprojects.ch>> wrote: > > On 2/22/13 7:47 AM, Alie Tan wrote: > > On Fri, Feb 22, 2013 at 2:17 PM, Tim Kientzle <tim@kientzle.com > <mailto:tim@kientzle.com>> wrote: > > > On Feb 21, 2013, at 10:07 PM, Tim Kientzle wrote: > > On Feb 21, 2013, at 9:50 PM, Alie Tan wrote: > > > I just built RasPi image and keeps getting this message: > > "unable to copy DTB into module directory" > > then the raspi reboot again and again. > > > Try backing out r247045 and see if that fixes > it for you. > > Also try breaking into the U-Boot prompt > and entering > > > Sorry, left out some steps here. (To clarify, this is a > separate > experiment to be done with an image that includes > r247045). The instructions should say: > > 1) Remove the "fdt addr 0x100" command from loader.rc > > 2) Early in boot, break to the U-Boot prompt (hit any > key during the > 3-second countdown) > > I can't even hit any key on my keyboard. What to do now? > > > Are you on USB/serial console? 256MB RPi? No reset button? > > > I am on video console connected to HDMI, 512MB RPI > > If so, it's very tricky to bring cu up and sneak in a keystroke (not > ENTER though) > > Fiddling with the power and cu usually takes a few attempts for me > > Werner > > Hmm, sorry - never used that HDMI output so far, I'm on serial console Werner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51271AAB.4080005>