Date: Thu, 14 Nov 2013 16:24:54 +0100 From: Hans Petter Selasky <hps@bitfrost.no> To: Eitan Adler <lists@eitanadler.com> Cc: "usb@freebsd.org" <usb@freebsd.org> Subject: Re: Unable to attach USB mouse Message-ID: <5284EB46.7010903@bitfrost.no> In-Reply-To: <CAF6rxgndwWtWEXYLmjer-7UYOGQ_TcQ3eywepETGGPjuBxsB%2Bw@mail.gmail.com> References: <CAF6rxgn-LvNMYS8o9q9=3-O01vc92Z8A6nf3%2BMe1NvNiT8sGZA@mail.gmail.com> <52847654.8070501@bitfrost.no> <CAF6rxgndwWtWEXYLmjer-7UYOGQ_TcQ3eywepETGGPjuBxsB%2Bw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 11/14/13 15:42, Eitan Adler wrote: > On Thu, Nov 14, 2013 at 2:05 AM, Hans Petter Selasky <hps@bitfrost.no> wrote: >> On 11/14/13 05:08, Eitan Adler wrote: >>> >>> The mouse driver fails to attach when plugging in my USB mouse. >>> >>> FreeBSD gravity.local 11.0-CURRENT FreeBSD 11.0-CURRENT #5 r257754: >>> Thu Nov 7 12:12:51 EST 2013 >>> root@gravity.local:/usr/obj/usr/src/sys/EADLER amd64 >>> >>>> From boot: >>> >>> [52341] ugen0.2: <Logitech> at usbus0 >>> [52341] ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev >>> 2.00/27.20, addr 11> on usbus0 >>> [52341] ums0: 8 buttons and [XYZT] coordinates ID=0 >>> [54057] ugen0.2: <Logitech> at usbus0 (disconnected) >>> [54057] ums0: at uhub0, port 1, addr 11 (disconnected) >>> [54058] xhci_do_command: Command timeout! >>> [54058] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) >> >> >> What USB controllers does this system have? >> >> --HPS >> > > [10005 root@gravity (100%) /home/eitan ]#usbconfig > ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER > (5.0Gbps) pwr=SAVE (0mA) > ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE (0mA) > ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE (0mA) > ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE (0mA) > ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE (0mA) > ugen2.3: <Lenovo EasyCamera Azurewave> at usbus2, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON (500mA) > ugen1.4: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=ON (0mA) > ugen1.3: <Linksys AE1000 Linksys> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON (450mA) > > pciconf -lv --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5284EB46.7010903>