Date: Wed, 27 Jan 1999 00:42:31 +0300 From: Juriy Goloveshkin <j@avias.com> To: Nate Williams <nate@mt.sri.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re[2]: pccard Message-ID: <529.990127@avias.com> References: <199901261620.JAA12289@mt.sri.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Nate >> does the PC Card support work in 3.0-STABLE(CURRENT)? NW> It should. good. have you seen this working since 19/01/99. I have not. :( >> 1) the kernel doesn't respond on card insertion/removal. >> it seems to me that the reason of such behavior is in the string 789 of file >> pccard/pcic.c >> >> it has changed from >> if (validslots) >> to >> if (validslots && pcic_irq <=0) >> >> are there any problems with irq handling? NW> Obviously it doesn't work on your setup. See the recent discussion in NW> freebsd-mobile why using an IRQ is a 'good thing', as well as why some NW> folks won't to have that ability remove. ok. what should I do to run it via IRQ on my Libretto50? :) >> pccard_configure() displays only the last device added via >> pccard_add_driver(). in my case I have sio, ed and fdc devices, but >> only fdc is displayed. but even these devices doesn't work on >> insertion. it seems that it worked in 3.0-RELEASE (excluding the >> problem with irq described above). >> Jan 25 23:30:51 home /kkk: Initializing PC-card drivers: ed ep fe sio NW> This line describes all of the drivers that are configured. I know. and in 3.0-RELEASE it works. In 3.0-STABLE kernel shows only LAST driver. Alhtough it isn`t important because *drivers includes all drivers. NW> Note that fdc is not supported. options FDC_YE NW> ... >> Ehternet card(if it was inserted before boot) works normally. NW> That's because it doesn't recognize that the card was inserted, which is NW> your original question. If card has inserted before boot - it recognized, but... "driver allocation failed..." NW> Change the line you describe above and it NW> should work fine. It _works_ with change in 3.0-RELEASE but It doesn't work in 3.0-STABLE(after 19/01/99) - driver allocation fails for all of my cards. at least in my case :) any ideas? Bye, Juriy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?529.990127>