Date: Sat, 14 Dec 2013 16:20:23 -0500 From: Adam McDougall <mcdouga9@egr.msu.edu> To: freebsd-stable@freebsd.org Subject: Re: geom_stripe problem in freebsd 10.0-rc1 Message-ID: <52ACCB97.5000504@egr.msu.edu> In-Reply-To: <52AB8647.4050202@bsdinfo.com.br> References: <52AB8647.4050202@bsdinfo.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/13/2013 17:12, Marcelo Gondim wrote: > Hi all, > > Anyone here seen it? First time I saw it happen. I'm here using a > FreeBSD 10.0-RC1 and doing some tests with the raid0(geom_stripe) but > is giving the following : > > I'm here with 3 discs being ada0 with the system and have the ADA1 and > ada2to do the raid 0. > > > # kldload geom_stripe > # gstripe label -v st0 /dev/ada1 /dev/ada2 > > GEOM_STRIPE: Device st0 created (id=2255281675). > GEOM_STRIPE: Disk ada1 attached to st0. > GEOM_PART: integrity check failed (ada1, BSD) > GEOM_STRIPE: Cannot add disk diskid/DISK-MSE421RP27UT1K to st0 > (error=17). > GEOM_PART: integrity check failed (diskid/DISK-MSE421RP27UT1K, BSD) > GEOM_STRIPE: Disk ada2 attached to st0. > GEOM_STRIPE: Device stripe/st0 activated. > GEOM_STRIPE: Cannot add disk diskid/DISK-MSK421Y215VYBC to st0 > (error=17). > > # bsdlabel -wB /dev/stripe/st0 > > GEOM_PART: integrity check failed (ada1, BSD) > GEOM_STRIPE: Cannot add disk diskid/DISK-MSK421Y215VYBC to st0 > (error=17). > GEOM_STRIPE: Cannot add disk diskid/DISK-MSE421RP27UT1K to st0 > (error=17). > GEOM_PART: integrity check failed (diskid/DISK-MSE421RP27UT1K, BSD) > > # newfs -U -j /dev/stripe/st0 > > > I can format and mount the st0 but is giving these errorsabove. > > # uname -a > FreeBSD bart.test 10.0-RC1 FreeBSD 10.0-RC1 #0 r259068: Sat Dec 7 > 17:45:20 UTC 2013 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC > amd64 > > []'s > Gondim > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" I noticed your messages below mention diskid which caused me some trouble. Can you try putting kern.geom.label.disk_ident.enable=0 in /boot/loader.conf and rebooting?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52ACCB97.5000504>