Date: Mon, 06 Jan 2014 16:28:56 +0100 From: Hans Petter Selasky <hps@bitfrost.no> To: Adrian Chadd <adrian@freebsd.org> Cc: =?UTF-8?B?6buE5paH6L6J?= <huanghwh@gmail.com>, freebsd-current <freebsd-current@freebsd.org> Subject: Re: Install 10.0-RC3 on MacBookPro Late 2013 Message-ID: <52CACBB8.1020905@bitfrost.no> In-Reply-To: <CAJ-Vmok16O0hR9G9rhVeO6Ki3yn4DZgjj4s65ddhQS5MZXVeXw@mail.gmail.com> References: <CAB8uncZO19Aen%2BuQRgO3whSOTVM%2BftcsGrJuGZZd4Qbd1Zf5mw@mail.gmail.com> <CAJ-Vmo=g-iVjNjygY93MVinptkA7HazJ3FRu1PsfKZtj-fubgg@mail.gmail.com> <CAB8unca6XZSEa8=c21yDJ=ueuUiW=D4v2PcLEzgt_sfTgsuzqA@mail.gmail.com> <CAB8unca8G32qcz67EaRdqrSBuO0YiBV4zL7fV3EfMozdeSsBQA@mail.gmail.com> <52CA56E5.8030101@bitfrost.no> <CAJ-Vmo=AxbQ9MMtkB_W3YW0s9QwmR8qWzgprOM_66MQqcgmdNQ@mail.gmail.com> <CAB8uncbjhzG-9BYbYH6skhnf-O24hDeX644aEpz162C-FHWTFA@mail.gmail.com> <52CA6E3F.9000301@bitfrost.no> <CAB8uncah%2BCOOptDmOiaKseqfDyeVd3veg2RLREOzfYtaJhfLYA@mail.gmail.com> <52CA7CE0.7070202@bitfrost.no> <CAJ-Vmok16O0hR9G9rhVeO6Ki3yn4DZgjj4s65ddhQS5MZXVeXw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 01/06/14 15:17, Adrian Chadd wrote: > Right, but it used to work. That's the confusing bit. How'd you make > it not work? :) Binary sect the sys/dev/usb/controller/xhci.c revision history? There has been several bug reports for the Lynx point, and others XHCI chipsets are working just fine. --HPS > -a > > On 6 January 2014 01:52, Hans Petter Selasky <hps@bitfrost.no> wrote: >> On 01/06/14 10:41, Huang Wen Hui wrote: >>> >>> % grep xhci dmesg-xhci-debug.txt | more >>> xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xc1e00000-0xc1e0ffff at >>> device 20.0 on pci0 >>> xhci0: attempting to allocate 1 MSI vectors (8 supported) >>> xhci0: using IRQ 266 for MSI >>> xhci0: MSI enabled >> >> >> Those USB timeouts are most likely due to port routing not working properly. >> It is because intel did something special to their lynx point series. >> >> Try to set : >> >> hw.usb.xhci.xhci_port_route = "-1" >> >> in /boot/loader.conf >> >> --HPS > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52CACBB8.1020905>