Date: Mon, 07 Apr 2014 14:47:27 +0200 From: Hans Petter Selasky <hps@selasky.org> To: Ivan Rokotov <ivan.rokotov.bsd@gmail.com>, freebsd-usb@freebsd.org Subject: Re: Realtek SD Card Reader 0x0bda / 0x0129 detection? Message-ID: <53429E5F.1030407@selasky.org> In-Reply-To: <CAOTTJKGJFEwzhtL%2Br4Xp=hVx=dWAwXx7Jm1qu10MVXx5AHsC9A@mail.gmail.com> References: <CAOTTJKGJFEwzhtL%2Br4Xp=hVx=dWAwXx7Jm1qu10MVXx5AHsC9A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 04/06/14 03:53, Ivan Rokotov wrote: > Hi, > > Environment: FreeBSD 10.0-RELEASE/amd64 on Lenovo IdeaPad S400. > > SD Card Reader visible by usbconfig: > ugen1.4: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON (500mA) > > usbconfig info: > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x00ff > bDeviceProtocol = 0x00ff > bMaxPacketSize0 = 0x0040 > idVendor = 0x0bda > idProduct = 0x0129 > bcdDevice = 0x3960 > iManufacturer = 0x0001 <Generic> > iProduct = 0x0002 <USB2.0-CRW> > iSerialNumber = 0x0003 <20100201396000000> > bNumConfigurations = 0x0001 > > Adding/removing SD card yields nothing. The same with booting with SD > card and/or turning power on/off with usbconfig. > > If I add this to /usr/src/sys/dev/usb/usbdevs > product REALTEK USB20CRW_T 0x0129 USB20CRW Card Reader > > - nothing changes. > > If I add these quirks to /usr/src/sys/dev/usb/quirk/usb_quirk.c > USB_QUIRK(REALTEK, USB20CRW_T, 0x0000, 0xffff, UQ_MSC_NO_GETMAXLUN, > UQ_MSC_FORCE_WIRE_BBB, UQ_MSC_FORCE_PROTO_SCSI) > > then I get: > umass0: <Bulk-In, Bulk-Out, Interface> on usbus1 > umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:3:0:-1: Attached to scbus3 > ... > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > (probe0:umass-sim0:0:0:0): Retrying command > ... > (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > > Adding the 'UQ_MSC_NO_SYNC_CACHE" quirk changes nothing. > > Does anybody know what should be done and is it possible at all to use > this card reader with FreeBSD 10.0? > > Ivan > _______________________________________________ > freebsd-usb@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org" > Hi, How did you add the quirk? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53429E5F.1030407>