Date: Sun, 13 Apr 2014 20:50:01 +0400 From: Boris Samorodov <bsam@passap.ru> To: "O. Hartmann" <ohartman@zedat.fu-berlin.de> Cc: freebsd-questions@freebsd.org, FreeBSD Ports <freebsd-ports@freebsd.org> Subject: Re: print/cups: since update to 1.7.1: error : Send-Document client-error-document-format-not-supported Message-ID: <534AC039.5080109@passap.ru> In-Reply-To: <20140412151604.0c90adc4.ohartman@zedat.fu-berlin.de> References: <20140408154210.1aec26a8.ohartman@zedat.fu-berlin.de> <534476FE.4020109@passap.ru> <20140411130833.0d4cd2f2.ohartman@zedat.fu-berlin.de> <2456953.yOakfpjjYJ@lumiwa.farms.net> <20140412151604.0c90adc4.ohartman@zedat.fu-berlin.de>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] 12.04.2014 17:16, O. Hartmann пишет: > On Fri, 11 Apr 2014 08:19:45 -0400 > Ajtim <lumiwa@gmail.com> wrote: > >> On Friday 11 April 2014 13:08:33 O. Hartmann wrote: >>> On Wed, 09 Apr 2014 02:23:58 +0400 >>> >>> Boris Samorodov <bsam@passap.ru> wrote: >>>> 09.04.2014 00:25, O. Hartmann пишет: >>>>> On Tue, 08 Apr 2014 23:16:33 +0400 >>>>> >>>>> Boris Samorodov <bsam@passap.ru> wrote: >>>>>> 08.04.2014 17:42, O. Hartmann пишет: >>>>>>> Since the update of print/cups from 1.5.X to 1.7.1 >>>>>> >>>>>> How did you do it? >>>>> >>>>> As it is reported in /usr/ports/UPDATING. I delete first cups-image, >>>>> then did the update which reeled in all the new stuff automatically. >>>> >>>> OK, lets start from some obvious things. >>>> Did you restart cupsd while experimenting? >>> >>> No. >>> >>>> Give an output for: >>>> ----- >>>> % type lpr >>> >>> lpr is /usr/local/bin/lpr >>> pkg which /usr/local/bin/lpr >>> /usr/local/bin/lpr was installed by package cups-base-1.7.1 >>> >>>> % ls -l /usr/local/etc/cups >>> >>> -r--r--r-- 1 root wheel 2807 11 Apr 11:58 cups-browsed.conf >>> -rw-r----- 1 root cups 3197 8 Apr 17:15 cups-files.conf >>> -rw-r----- 1 root cups 3197 8 Apr 17:15 cups-files.conf.bak >>> -rw-r----- 1 root wheel 3137 11 Apr 12:02 cups-files.conf.sample >>> -r--r--r-- 1 root wheel 9521 11 Apr 11:50 cups-pdf.conf >>> -r--r--r-- 1 root wheel 9521 11 Apr 11:50 cups-pdf.conf.sample >>> -rw-r----- 1 root cups 3442 8 Apr 17:22 cupsd.conf >>> -rw-r----- 1 root cups 5098 8 Apr 17:20 cupsd.conf.O >>> -rw-r----- 1 root cups 3442 8 Apr 17:22 cupsd.conf.bak >>> -rw-r----- 1 root wheel 4492 11 Apr 12:02 cupsd.conf.default >>> -r--r--r-- 1 root wheel 4492 11 Apr 12:02 cupsd.conf.sample >>> drwxr-xr-x 2 root wheel 512 11 Apr 12:02 interfaces >>> -r--r--r-- 1 root wheel 1875 8 Apr 19:17 mime.convs >>> -r--r--r-- 1 root wheel 1874 11 Apr 12:02 mime.convs.sample >>> -r--r--r-- 1 root wheel 6456 8 Apr 19:18 mime.types >>> -r--r--r-- 1 root wheel 6455 11 Apr 12:02 mime.types.sample >>> drwxr-xr-x 2 root cups 512 11 Apr 12:02 ppd >>> -rw------- 1 root cups 4134 8 Apr 17:33 printers.conf >>> -rw------- 1 root cups 4134 8 Apr 14:58 printers.conf.O >>> -rw------- 1 root cups 4134 8 Apr 17:22 printers.conf.bak >>> -rw-r--r-- 1 root cups 946 11 Apr 11:53 pstoraster.convs >>> -r--r--r-- 1 root wheel 778 11 Apr 12:04 pstotiff.convs >>> -r--r--r-- 1 root wheel 2084 11 Apr 12:04 pstotiff.types >>> -r--r--r-- 1 root wheel 284 11 Apr 11:49 snmp.conf >>> -r--r--r-- 1 root wheel 284 11 Apr 12:02 snmp.conf.sample >>> drwx------ 2 root cups 512 11 Apr 12:02 ssl >>> >>>> % make -C /usr/ports/print/cups-client pretty-print-config >>> >>> -GNUTLS (whoops ... this is not the default, isn't it?) >>> >>> ==> corrected that with a new recompilation with rmconfig preceded. >>> >>>> % grep CUPS /etc/make.conf >>> >>> NULL (menas: no output) >>> >>>> % pkg info -x cups hp foo gut >>> >>> cups-base-1.7.1 >>> cups-client-1.7.1 >>> cups-filters-1.0.52 >>> cups-image-1.7.1 >>> cups-pdf-2.6.1_1 >>> cups-pstoraster-8.15.4_7 >>> cups-samba-6.0_7 >>> gutenprint-cups-5.2.8_1 >>> libgnomecups-0.2.3_5,1 >>> linux-f10-cups-libs-1.3.11_1 >>> foomatic-db-hpijs-1.4 >>> hplip-3.14.1 >>> kdevelop-php-1.6.0_1 >>> kdevelop-php-docs-1.6.0_1 >>> php5-5.4.27 >>> swhplugins-0.4.15_4 >>> foomatic-db-20140331 >>> foomatic-db-engine-4.0.11,2 >>> foomatic-db-hpijs-1.4 >>> foomatic-filters-4.0.17 >>> gimp-gutenprint-5.2.8 >>> gutenprint-base-5.2.8 >>> gutenprint-cups-5.2.8_1 >>> gutenprint-ijs-5.2.8 >>> >>>> ----- >>>> >>>> Stop cupsd, move temporary /var/log/cups/*_log to another location. >>>> Start cupsd and look for suspicious messages at /var/log/cups/* files. >>> >>> Nothing suspicious so far. With print/cups-filters installed, the whole cups >>> printing system is corrupted and doesn't print a single sheet of paper >>> (PDF/PS) normal es expected. >>> >>> >>> Prior to this task, I recompiled, as you suggested, first all cups ports and >>> afterwards hplip/foomatic. I also installed print/cups-filters before >>> recompiling hplip/foomatic. >> >> It works for me now (FreeBSD 10.0-RELEASE): >> >> I did deinstall cups* and hplip. Than installed cups and patched hplip. First >> I used as usual hp-business_inkjet_3000-hpijs-pcl3.ppd.gz and it didn't work >> It printed:%PDF-1.4 >> and jobs processing never stopped. Than I removed device and installed again >> with -3000-ps.ppd.gz and it works but cannot print test page. >> > > I tried alternatives, but it is with all (known to me) usefull drivers for the specific > printer the same result: empty pages, print job stuck in queue. I also tried > most recent hplip-3.14.4 but I doubt this is the reason. > > I can print PDF and PS, as reported, when deinstalling/removing print/cups-filters using > clients like xpdf, xdvi or printing directly via lpr -PPRINTER_NAME jobfile.ps. This > fails when print/cups-filter is installed. This is rather strange. But may be this is because you use hplip which I've never used before. > Have you tried to deinstall by intention cups-filters and check whether the formerly used > driver works for you? Yes, I tested cups-1.7.0 for several months with no ill-effects (HP, OKI and Epson printers). > I also deinstalled everything related to hplip and cups (cups, cups-XXX, hplip, qpdf, > foomatic-XXX) and reinstalled first print/cups which reels in all cups-ports and then > print/hplip, which reels in qpdf and foomatic-filters. This should ensure the propper > chain of dependencies. But it fails. I then recompiled approx 260 ports by "portmaster > -f hplip" on my workstation and ~ 170 ports the same way on the server (gutenprint and > other gimp realted stuff aren't installed on the server). I had no success. > > I'd like to figure out what part of the duo cups and hplip is the culprit, but it seems > not to be easy if one is dependend on a working printing system. Since I didn't use (and test) print/hplip I gave it a try. I didn't manage to print via command line using hplip (i.e. just "lpr -P <hplip_printer> test_file" ended with almost blank line and the tast waiting at the printer's query. Further analysis showed that foomatic-rip-hplip doesn't like PDF files which new CUPS uses by default. It expects a PS file: ----- File: <STDIN> Reading PostScript input ... PID 29404 (/usr/local/libexec/cups/filter/pstopdf) exited with no errors. Job does not start with "%!", is it PostScript? ----- After switching from HP's foomatic-rip-hplip to native foomatic-rip all is fine: ----- PID 75535 (/usr/local/libexec/cups/filter/pstopdf) exited with no errors. Filetype: PDF ----- So, I fixed an error which I managed to reproduce. Please, try the attached file, recompile print/hplip and report back. The patch uses a native foomatic-rip where foomatic-rip-hplip was used. -- WBR, Boris Samorodov (bsam) FreeBSD Committer, http://www.FreeBSD.org The Power To Serve [-- Attachment #2 --] Index: Makefile =================================================================== --- Makefile (revision 350910) +++ Makefile (working copy) @@ -3,6 +3,7 @@ PORTNAME= hplip PORTVERSION= 3.14.1 +PORTREVISION= 1 CATEGORIES= print MASTER_SITES= SF @@ -10,7 +11,7 @@ COMMENT= Drivers and utilities for HP Printers and All-in-One devices LIB_DEPENDS= libjpeg.so:${PORTSDIR}/graphics/jpeg \ - libcupsdriver.so:${PORTSDIR}/print/cups-base \ + libcupsmime.so:${PORTSDIR}/print/cups-base \ libcups.so:${PORTSDIR}/print/cups-client \ libcupsimage.so:${PORTSDIR}/print/cups-image \ libdbus-1.so:${PORTSDIR}/devel/dbus @@ -28,7 +29,6 @@ GNU_CONFIGURE= yes CONFIGURE_ARGS= --enable-foomatic-ppd-install \ - --enable-foomatic-rip-hplip-install \ --enable-hpijs-install \ --with-cupsbackenddir=${PREFIX}/libexec/cups/backend \ --with-cupsfilterdir=${PREFIX}/libexec/cups/filter \ @@ -161,5 +161,6 @@ ${MKDIR} ${STAGEDIR}${PREFIX}/etc/hp ${INSTALL_DATA} ${WRKSRC}/hplip.conf ${STAGEDIR}${PREFIX}/etc/hp/hplip.conf.sample ${STRIP_CMD} ${STRIP_FILES:S,^,${STAGEDIR}${PREFIX}/,} + ${LN} -sf ${LOCALBASE}/bin/foomatic-rip ${STAGEDIR}${PREFIX}/libexec/cups/filter/foomatic-rip-hplip .include <bsd.port.mk>help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?534AC039.5080109>