Date: Tue, 03 Jun 2014 20:30:36 +0200 From: Harm Weites <harm@weites.com> To: freebsd-wireless@freebsd.org Subject: Trouble setting up multi SSID and 802.1X Message-ID: <538E144C.1080400@weites.com>
next in thread | raw e-mail | index | archive | help
Hi, While trying to setup an AP with two SSID's I ran into some issues. Environment: TP-Link 1043ND (MIPS) ath0 ether 00:19:e0:66:66:68 wlan0 ether 02:ab:cd:ef:12:30 wlan1 ether 00:19:e0:66:66:68 Both wlan0 and wlan1 have been created with wlandev ath0 and wlanmode hostap. The goal is to have one guest wifi network, locked down using pf and having a proper wifi network using radius for personal use (thus, without pf). This is the hostapd config: # ctrl_interface=/var/run/hostapd hw_mode=g bss=wlan0 interface=wlan0 driver=bsd ssid=gasten wpa=3 wpa_key_mgmt=WPA-PSK wpa_passphrase=comegetsome wpa_pairwise=CCMP bss=wlan1 driver=bsd ssid=prive wpa=1 wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP wpa_group_rekey=300 wpa_gmk_rekey=640 ieee8021x=1 auth_algs=1 eapol_key_index_workaround=1 own_ip_addr=127.0.0.1 nas_identifier=wifi.example.com auth_server_addr=10.65.0.130 auth_server_port=1812 auth_server_shared_secret=secret acct_server_addr=10.65.0.130 acct_server_port=1813 acct_server_shared_secret=secret # Now, hostapd complains about the following: Configuration file: /etc/hostapd.conf Using interface wlan0 with hwaddr 02:ab:cd:ef:12:30 and ssid "gasten" Failed to add BSS (BSSID=02:ab:cd:ef:12:31) wlan0: Unable to setup interface. Failed to remove BSS interface wlan0 Thats it for having multiple (2) SSID's. Now, the 2nd issue: radius. For this, I've disabled the passphrase'd SSID to have just one (working) SSID. I haven't given the backend much attention just yet, but I'm seeing the following error after trying to associate: wlan0: STA a8:16:b2:54:9c:ef IEEE 802.11: associated wlan0: CTRL-EVENT-EAP-STARTED a8:16:b2:54:9c:ef wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1 wlan0: STA a8:16:b2:54:9c:ef IEEE 802.11: disassociated ioctl[SIOCS80211, op=20, val=0, arg_len=7]: No such file or directory ioctl[SIOCS80211, op=20, val=0, arg_len=7]: No such file or directory This is using an Android device, with PEAP. I haven't got a clue yet on which mode I should be using, or how to configure that but since I'm seeing a 'No such file or directory' I'm afraid something needs to be resolved before diving into the final configuration (if this was about cert/key files, shouldn't it just explicitly say it's missing just that?). Attached to this message is some debug output from hostapd from the connection attempt. Regards, Harm
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?538E144C.1080400>