Date: Tue, 15 Jul 2014 17:17:27 +0200 From: Johan Hendriks <joh.hendriks@gmail.com> To: freebsd-fs@freebsd.org Subject: zpool upgrade does not work with latest 10 STABLE Message-ID: <53C54607.2090100@gmail.com>
next in thread | raw e-mail | index | archive | help
Hello all.
Two days ago I upgraded my zpool to the latest version using zpool
upgrade. This worked fine. Today there where some new features added to
ZFS and I did rebuild the system. A zpool status shows me that the pool
can be upgraded.
beasty ~ # zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
storage 1.81T 1.06T 767G 58% 1.00x ONLINE -
beasty ~ # zpool status
pool: storage
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: scrub repaired 0 in 2h28m with 0 errors on Tue Jul 15 13:57:56 2014
config:
NAME STATE READ WRITE CKSUM
storage ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gpt/disk01 ONLINE 0 0 0
gpt/disk02 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
gpt/disk03 ONLINE 0 0 0
gpt/disk04-r ONLINE 0 0 0
errors: No known data errors
beasty ~ # uname -a
FreeBSD beasty.mydomain.local 10.0-STABLE FreeBSD 10.0-STABLE #0
r268604: Mon Jul 14 11:01:01 CEST 2014
root@beasty.mydomain.local:/usr/obj/usr/src/sys/KRNL amd64
beasty ~ # zpool upgrade
This system supports ZFS pool feature flags.
All pools are formatted using feature flags.
Some supported features are not enabled on the following pools. Once a
feature is enabled the pool may become incompatible with software
that does not support the feature. See zpool-features(7) for details.
POOL FEATURE
---------------
storage
embedded_data
But when i do a zpool upgrade it give me an error.
beasty ~ # zpool upgrade storage
This system supports ZFS pool feature flags.
cannot set property for 'storage': invalid argument for this pool operation
All things seem to work, and the scrub did a good job also....
Is there something I am missing?
regards
Johan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53C54607.2090100>