Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 02 Sep 2014 22:16:52 +0200
From:      Marek Salwerowicz <marek_sal@wp.pl>
To:        "Dustin J. Mitchell" <dustin@v.igoro.us>,  Peter Jeremy <peter@rulingia.com>
Cc:        freebsd-net@freebsd.org
Subject:   Re: bridging VLAN interfaces and STP
Message-ID:  <540625B4.6040907@wp.pl>
In-Reply-To: <CAJtE5vQn-ToGhMqPw3By8M4Mi_ycpkR33qxQRwT=ezKv5PTmhg@mail.gmail.com>
References:  <CAJtE5vRq8oJz1f8ujsTSjGJjoEMp_J-n6Nqj0YCUd_nrScnPqA@mail.gmail.com>	<CAJtE5vQLdtXtyejKUHkX1DKfVS-SaVF4n3=nfA%2BecH4Jhn3VXQ@mail.gmail.com>	<20120827094956.GA93853@server.rulingia.com>	<CAJtE5vSQ2W_H_jsr=BA7e0pcU1wJ_qiKHTSc3W2AuWbWgAjvpA@mail.gmail.com>	<20120901215514.GA84970@server.rulingia.com> <CAJtE5vQn-ToGhMqPw3By8M4Mi_ycpkR33qxQRwT=ezKv5PTmhg@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello Dustin,

W dniu 2012-09-02 o 01:13, Dustin J. Mitchell pisze:
> On Sat, Sep 1, 2012 at 5:55 PM, Peter Jeremy<peter@rulingia.com>  wrote:
>> >That looks like RSTP is enabled on both bridge10 and bridge20 but is
>> >not seeing incoming [R]STP packets.  Are you sure the switch connected
>> >to vr1 is configured with per-VLAN STP (this is probably not the
>> >switch default).
>> >
>> >Have you tried running tcpdump on vr1 and checked that you are seeing
>> >STP packets within the VLANs.
> Actually, if you compare with my original ifconfig, you'll see that
> this particular arrangement shows STP as enabled on the bridge, but
> not on any of the members (no STP in their options.  In the OP, you
> can see that the vr{2,3} get STP in their flags
> (<LEARNING,DISCOVER,STP,AUTOEDGE,AUTOPTP>) while vr1.10 does not.
> That, and the error message from the 'ifconfig bridge10 stp vr1.10'
> command..


I'd like to ask if have you managed to figure out this issue? I am 
facing more or less the same problem

I have set up multiple VLANs on my FreeBSD box and now would like to 
bridge WiFi adapter (wlan0) with only one vlan:

When I try to configure bridge:

% sudo ifconfig bridge create
% sudo ifconfig bridge addm wlan0
% sudo ifconfig bridge addm vlan1200
bridge0: error setting interface capabilities on vlan1200
% sudo ifconfig bridge stp wlan0
% sudo ifconfig bridge0 stp vlan1200
ifconfig: unable to set bridge flags: Invalid argument

% ifconfig bridge0
bridge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
         ether 02:8e:2e:18:3e:00
         nd6 options=9<PERFORMNUD,IFDISABLED>
         id 04:f0:21:0f:77:d7 priority 32768 hellotime 2 fwddelay 15
         maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
         root id 04:f0:21:0f:77:d7 priority 32768 ifcost 0 port 0
         member: vlan1200 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                 ifmaxaddr 0 port 6 priority 128 path cost 20000
         member: wlan0 flags=147<LEARNING,DISCOVER,STP,AUTOEDGE,AUTOPTP>
                 ifmaxaddr 0 port 11 priority 128 path cost 33333 proto rstp
                 role designated state discarding


If I change vlan1200 to physical interface, everything works without any 
problems..

Do you have any idea?

Cheers,

Marek






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?540625B4.6040907>