Date: Wed, 20 May 2015 18:29:12 +0200 From: Johann <jhugo.meraka@gmail.com> To: freebsd-wireless@freebsd.org Subject: Re: hostapd + freeradius can't connect Message-ID: <555CB658.6040103@gmail.com> In-Reply-To: <CAJ-Vmo=anQCxvHq1jCR9bNk2OCjfye5gV_74jeWcr%2BOdBd1WWw@mail.gmail.com> References: <01e701d08d75$fed02bd0$fc708370$@gmail.com> <CAJ-VmokxL6Zz=K2p9zeg84_EF5zr6Kk4mWv=oxt2FA59JktA0w@mail.gmail.com> <003c01d08dbe$6018b900$204a2b00$@gmail.com> <CAJ-Vmo=anQCxvHq1jCR9bNk2OCjfye5gV_74jeWcr%2BOdBd1WWw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2015/05/16 08:03 AM, Adrian Chadd wrote: > Hi, > Has this ever worked? Yes. I got it working in April 2012 on FreeBSD 8 and 9. I've used a FreeRadius server and a FreeBSD client with wpa_supplicant to test it. At that stage you had to enable the eap_server when you compile hostapd # echo HOSTAPD_CFLAGS+=-DEAP_SERVER >> /etc/src.conf # cd /usr/src/usr.sbin/wpa/hostapd # make # make install but Bernhard Schmidt fixed it so that EAP_SERVER was enabled by default. Here is the configs that I used: rc.conf hostname="AP-vlan" wlans_ath0="wlan0" create_args_wlan0="wlanmode hostap country ZA" ifconfig_wlan0="146.64.5.5/24 mode 11g channel 6" defaultrouter="146.64.5.1" hostapd_enable="YES" cloned_interfaces="bridge0" ifconfig_bridge0="addm sis0 addm wlan0 up" ifconfig_sis0="up" hostapd.conf interface=wlan0 ctrl_interface=/var/run/hostapd ctrl_interface_group=wheel ssid=testAP hw_mode=g channel=6 wpa=1 wpa_pairwise=CCMP TKIP wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP Hope it helps Regards Johann
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?555CB658.6040103>