Date: Fri, 11 Nov 2005 23:41:36 +0200 (EET) From: "Giorgos Kapetanakis" <zoulou@sians.org> To: stable@freebsd.org Cc: thanos@sians.org Subject: kernel build fails at 6.0-release! Message-ID: <56088.62.74.67.102.1131745296.squirrel@webmail.sians.org>
next in thread | raw e-mail | index | archive | help
Hi! I just can't build my kernel. I tried several changes at the config file, but I always get the same message. ------------------------------ # # DEEPBLACK -- DeepBlack kernel configuration file for FreeBSD/i386 # # $FreeBSD: src/sys/i386/conf/DEEPBLACK v.1.0 $ machine i386 #cpu I486_CPU # (commented out this at v.1.0!!) #cpu I586_CPU # (commented out this at v.1.0!!) cpu I686_CPU ident DEEPBLACK # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device #options NFSCLIENT # Network Filesystem Client (commented out this at v.1.0!!) #options NFSSERVER # Network Filesystem Server (commented out this at v.1.0!!) #options NFS_ROOT # NFS usable as /, requires NFSCLIENT (commented out this at v.1.0!!) #options MSDOSFS # MSDOS Filesystem (commented out this at v.1.0!!) #options CD9660 # ISO 9660 Filesystem (commented out this at v.1.0!!) options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options GEOM_GPT # GUID Partition Tables. (commented out this at v.1.0!!) options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI (commented out this at v.1.0!!) #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory #options SYSVMSG # SYSV-style message queues (commented out this at v.1.0!!) #options SYSVSEM # SYSV-style semaphores (commented out this at v.1.0!!) options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. (commented out this at v.1.0!!) #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. (commented out this at v.1.0!!) options ADAPTIVE_GIANT # Giant mutex is adaptive. device apic # I/O APIC # Bus support. device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives (commented out this at v.1.0!!) device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives (commented out this at v.1.0!!) options ATA_STATIC_ID # Static device numbering # SCSI Controllers (commented out this at v.1.0!!) #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family ##device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion ##device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals (commented out this at v.1.0!!) device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem (commented out this at v.1.0!!) #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers (commented out this at v.1.0!!) #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard #device psm # PS/2 mouse (commented out this at v.1.0!!) device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge (commented out this at v.1.0!!) #device pccard # PC Card (16-bit) bus (commented out this at v.1.0!!) #device cardbus # CardBus (32-bit) bus (commented out this at v.1.0!!) # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) #device lpt # Printer (commented out this at v.1.0!!) #device plip # TCP/IP over parallel (commented out this at v.1.0!!) device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. (commented out this at v.1.0!!) #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! (commented out this at v.1.0!!) #device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. (commented out this at v.1.0!!) #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards (commented out this at v.1.0!!) #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. ##device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device #device ether # Ethernet support (commented out this at v.1.0!!) #device sl # Kernel SLIP (commented out this at v.1.0!!) device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. #device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface #device ehci # EHCI PCI->USB interface (USB 2.0) (commented out this at v.1.0!!) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" #device ukbd # Keyboard (commented out this at v.1.0!!) device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs (commented out this at v.1.0!!) #device urio # Diamond Rio 500 MP3 player (commented out this at v.1.0!!) #device uscanner # Scanners (commented out this at v.1.0!!) # USB Ethernet, requires miibus (commented out this at v.1.0!!) #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support (commented out this at v.1.0!!) #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) # SCSI subsystem (add v.1.0) device atapicam # Sound card (add v.1.0) device sound device snd_es137x ------------------------------------- linking kernel.debug if.o(.text+0x35a0): In function `if_setlladdr': /usr/src/sys/net/if.c:2152: undefined reference to `arp_ifinit' *** Error code 1 Stop in /usr/obj/usr/src/sys/DEEPBLACK. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. --------------------------------------- Can anyone help? Thanx in advance! -- Giorgos Kapetanakis
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56088.62.74.67.102.1131745296.squirrel>