Date: Wed, 15 Jul 2009 12:35:17 -0500 From: Chris Ruiz <yr.retarded@gmail.com> To: Andrew Tulloch <andrew@flarn.com> Cc: freebsd-current@freebsd.org Subject: Re: 8.0-BETA1 on a HP DL585 Issues Message-ID: <58c737d70907151035ya9a829eyf4945d1fadc4ce0e@mail.gmail.com> In-Reply-To: <54854a7a0907150322n52a3595el5352a3987d2c75ac@mail.gmail.com> References: <54854a7a0907150322n52a3595el5352a3987d2c75ac@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 15, 2009 at 5:22 AM, Andrew Tulloch<andrew@flarn.com> wrote: > I've upgraded one of our HP DL585's (4xdual core opteron, 16GB ram) > from 7.2 to 8.0-BETA1 and seem to have a couple of issues. > > Firstly the machine will no longer shutdown or reboot, it just sits at > the Uptime:: XXXX prompt and doesn't reboot or power off, no > Rebooting/cpu_reset() messages. > > Secondly, sometimes the machine will not boot, it'll load the kernel > and start, but then hang at: > pcib0: <ACPI Host-PCI bridge> on acpi0 Try setting hw.pci.mcfg=0 at the boot loader prompt or in /boot/loader.conf and see if that helps with this issue. > The same seems to happen with GENERIC and a kernel config minus > witness etc for speed. > > If I revert to the 7.2 kernel it's fine. > > Any suggestions on things I can try? > > Full dmesg attached. > > Thanks, > Andrew Chris -- @chrisattack ----------------------------------------- http://twitter.com/chrisattack http://chrisattack.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?58c737d70907151035ya9a829eyf4945d1fadc4ce0e>