Date: Tue, 08 May 2018 18:23:43 +0200 From: Harry Schmalzbauer <freebsd@omnilan.de> To: Kevin Bowling <kevin.bowling@kev009.com> Cc: Stephen Hurd <shurd@freebsd.org>, "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: iflib-if_em tests with HEAD and lagg panic [Was: Re: svn commit: r333338 - in stable/11/sys: dev/bnxt kern net sys] Message-ID: <5AF1CF0F.4040909@omnilan.de> In-Reply-To: <CAK7dMtB3V1F=2AxtsbUznn5DO81G3Zkh9UYiN3eWkyOfV_CYmg@mail.gmail.com> References: <201805072142.w47LgN1R041002@repo.freebsd.org> <5AF16B8B.7030703@omnilan.de> <CAK7dMtBkCvLgPVnsf%2BECcrdbKNvOShONeZ=vqvg3dJ5ZeuoP5w@mail.gmail.com> <5AF17134.7020602@omnilan.de> <CAK7dMtB3V1F=2AxtsbUznn5DO81G3Zkh9UYiN3eWkyOfV_CYmg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Bezüglich Kevin Bowling's Nachricht vom 08.05.2018 11:52 (localtime):
…
>> But if the simple iflib/hw-support test with kawela+hartwell helps I'm
>> happy to do.
>
> At this point it would be helpful, we think e1000 is nearing pretty
> good shape and I need to become familiar with any outstanding bugs.
I started with hartwell:
em1: attach_pre capping queues at 2
Current cap: 0x460b
em1: using 1024 tx descriptors and 1024 rx descriptors
em1: msix_init qsets capped at 2
em1: pxm cpus: 2 queue msgs: 4 admincnt: 1
em1: using 2 rx queues 2 tx queues
em1: Using MSIX interrupts with 3 vectors
em1: allocated for 2 tx_queues
em1: allocated for 2 rx_queues
em1: Ethernet address: 00:1b:21:3e:90:52
em1: netmap queues/slots: TX 2/1024, RX 2/1024
dev.em.1.iflib.driver_version: 7.6.1-k
dev.em.1.queue_rx_1.rx_irq: 0
dev.em.1.queue_rx_1.rxd_tail: 607
dev.em.1.queue_rx_1.rxd_head: 21
dev.em.1.queue_rx_0.rx_irq: 0
dev.em.1.queue_rx_0.rxd_tail: 410
dev.em.1.queue_rx_0.rxd_head: 412
dev.em.1.queue_tx_1.tx_irq: 0
dev.em.1.queue_tx_1.txd_tail: 8
dev.em.1.queue_tx_1.txd_head: 8
dev.em.1.queue_tx_0.tx_irq: 0
dev.em.1.queue_tx_0.txd_tail: 428
dev.em.1.queue_tx_0.txd_head: 428
Looks good so far, no problems with simple line speed (NFS4) copies.
According to the i217 (Clarkville) Datasheet, it also supports 2 queues:
Table 63. Intel® Ethernet Controller I217 Capability PHY Address 01,
Page 776,Register 19
But it probably was never supported, at least I haven't ever checked
pre-iflib.
Here's the clakville:
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at
em0: PCIY_MSIX capability not found; or rid 0 == 0.
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: 54:be:f7:0b:d7:4e
em0: netmap queues/slots: TX 1/1024, RX 1/1024
Since it's not not effort here, I also tried LACP, which panicked.
vmcore available, but what debugger to use these days? kgdb seems to be
replaced...
-harry
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5AF1CF0F.4040909>