Date: Mon, 25 Jan 2016 19:00:59 +0100 From: Oliver Psotta <oliver.psotta@posteo.de> To: freebsd-current@freebsd.org Subject: FreeBSD not booting on Raspberry with VGA 666 Message-ID: <5B2CF49E-DF46-4E11-91C2-018FE55EC1F4@posteo.de>
next in thread | raw e-mail | index | archive | help
Hello, FreeBSD-11.0-CURRENT-arm-armv6-RPI2-20160121-r294499 did not boot on a = Rasberry Pi 2 B with the Gert VGA 666 adaptor connected to the = Raspberry's GPIO port. This adaptor basically is a passive resistor = network, using most of the GPIO's pins. My guess is that FreeBSD tries to activate the serial port on GPIO and = this fails. Is there a solution to turn off the serial port or set the = config.txt to enable booting? By the way I've managed to get VGA 666 working for FreeBSD with the same = settings and files as for Linux and Risc OS. Of course booting stops = after the message=20 [code] Hit any key to stop autoboot: 0 [/code]=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5B2CF49E-DF46-4E11-91C2-018FE55EC1F4>