Date: Wed, 05 Apr 2006 16:01:00 -0400 From: Mike Tancsa <mike@sentex.net> To: Markus Trippelsdorf <markus@trippelsdorf.de>, stable@freebsd.org Subject: Re: smartmontools and latest 6.1 prerelease Message-ID: <6.2.3.4.0.20060405155043.106b7940@64.7.153.2> In-Reply-To: <20060405194618.GA705@bsd.trippelsdorf.de> References: <20060405194618.GA705@bsd.trippelsdorf.de>
next in thread | previous in thread | raw e-mail | index | archive | help
At 03:46 PM 05/04/2006, Markus Trippelsdorf wrote: >smartd stopped working here after I cvsuped to the latest 6.1 pre-release: > >=BBsmartd[4109]: Device: /dev/ad4, not ATA, no IDENTIFY DEVICE Structure=AB Same here on 2 different chipsets. However,=20 rebuilding smartmontools seems to fix it! [gp-kit1]# smartctl -a /dev/ad0 smartctl version 5.33 [i386-portbld-freebsd6.0]=20 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Failed command: : Inappropriate ioctl for device Failed command: : Inappropriate ioctl for device Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) A mandatory SMART command failed: exiting. To=20 continue, add one or more '-T permissive' options. [gp-kit1]# atapci0: <Intel ICH6 UDMA100 controller> port=20 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 And then rebuilding it, I get [gp-kit1]# smartctl -a /dev/ad0 smartctl version 5.33 [i386-portbld-freebsd6.1]=20 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: ST340014A Serial Number: 4JV2P2Z7 Firmware Version: 8.54 User Capacity: 40,020,664,320 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Wed Apr 5 15:59:49 2006 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto=20 Offline Data Collection: Disabled. Self-test execution status: ( 0) The=20 previous self-test routine completed without=20 error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto=20 Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST=20 THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1=20 Raw_Read_Error_Rate 0x000f 062 058 006=20 Pre-fail Always - 57585514 3=20 Spin_Up_Time 0x0003 099 098 000=20 Pre-fail Always - 0 4=20 Start_Stop_Count 0x0032 100 100 020=20 Old_age Always - 0 5=20 Reallocated_Sector_Ct 0x0033 100 100 036=20 Pre-fail Always - 0 7=20 Seek_Error_Rate 0x000f 086 060 030=20 Pre-fail Always - 442185414 9=20 Power_On_Hours 0x0032 092 092 000=20 Old_age Always - 7397 10=20 Spin_Retry_Count 0x0013 100 100 097=20 Pre-fail Always - 0 12=20 Power_Cycle_Count 0x0032 100 100 020=20 Old_age Always - 16 194=20 Temperature_Celsius 0x0022 033 045 000=20 Old_age Always - 33 195=20 Hardware_ECC_Recovered 0x001a 062 058 000=20 Old_age Always - 57585514 197=20 Current_Pending_Sector 0x0012 100 100 000=20 Old_age Always - 0 198=20 Offline_Uncorrectable 0x0010 100 100 000=20 Old_age Offline - 0 199=20 UDMA_CRC_Error_Count 0x003e 200 200 000=20 Old_age Always - 0 200=20 Multi_Zone_Error_Rate 0x0000 100 253 000=20 Old_age Offline - 0 202=20 TA_Increase_Count 0x0032 100 253 000=20 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status=20 Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5073 = - # 2 Short offline Completed without error 00% 5049 = - # 3 Short offline Completed without error 00% 5026 = - # 4 Short offline Completed without error 00% 5002 = - # 5 Short offline Completed without error 00% 4980 = - # 6 Short offline Completed without error 00% 4979 = - # 7 Short offline Completed without error 00% 4955 = - # 8 Short offline Completed without error 00% 4931 = - # 9 Short offline Completed without error 00% 4908 = - #10 Short offline Completed without error 00% 4884 = - #11 Short offline Completed without error 00% 4861 = - #12 Short offline Completed without error 00% 4837 = - #13 Short offline Completed without error 00% 4814 = - #14 Short offline Completed without error 00% 4813 = - #15 Short offline Completed without error 00% 4790 = - #16 Short offline Completed without error 00% 4766 = - #17 Short offline Completed without error 00% 4743 = - #18 Short offline Completed without error 00% 4719 = - #19 Short offline Completed without error 00% 4696 = - #20 Short offline Completed without error 00% 4672 = - #21 Short offline Completed without error 00% 4649 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.= =20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20060405155043.106b7940>