Date: Fri, 28 Nov 2025 10:56:08 +0100 (CET) From: Ronald Klop <ronald-lists@klop.ws> To: FreeBSD User <freebsd@walstatt-de.de> Cc: FreeBSD CURRENT <freebsd-current@freebsd.org> Subject: Re: 15-STABLE: dhclient fails on em0 (Lenovo T580) Message-ID: <636185594.3615.1764323768736@localhost> In-Reply-To: <20251128105016.28b5562a@hermann> References: <20251128082630.3dbea678@hermann> <817794595.3413.1764321375872@localhost> <20251128105016.28b5562a@hermann>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] Ok. Can you copy paste the console output of the booting system up until the login prompt? Or setup /var/log/console.log via /etc/syslog.conf and share that output. Regards, Ronald. Van: FreeBSD User <freebsd@walstatt-de.de> Datum: vrijdag, 28 november 2025 10:50 Aan: Ronald Klop <ronald-lists@klop.ws> CC: FreeBSD CURRENT <freebsd-current@freebsd.org> Onderwerp: Re: 15-STABLE: dhclient fails on em0 (Lenovo T580) > > On Fri, 28 Nov 2025 10:16:15 +0100 (CET) > Ronald Klop <ronald-lists@klop.ws> wrote: > > > It might be a typo in your mail, but it might also be the cause of your issue. > > This config needs to be in /etc/rc.conf, not in /etc/src.conf as you state in your mail. > > > > Regards, > > Ronald. > > Sorry, a typo. > > > > > > > Van: FreeBSD User <freebsd@walstatt-de.de> > > Datum: vrijdag, 28 november 2025 08:26 > > Aan: FreeBSD CURRENT <freebsd-current@freebsd.org> > > Onderwerp: 15-STABLE: dhclient fails on em0 (Lenovo T580) > > > > > > I recently switched from FreeBSD 14-STABLE to 15-STABLE (after branching of > > > 16-CURRENT) on my working laptop, physically a Lenovo T580. Its LAN NIC FreeBSD > > > recognizes as em0 (see below). System is at: 15.0-STABLE #16 > > > stable/15-n281349-b903f27e171b: Fri Nov 28 05:20:32 CET 2025 amd64. Kernel config: > > > GENERIC. Configuration has been setup and renewed acording to changes, consider the > > > system as a fresh install. > > > > > > Problem: em0 never gets an IPv4 via DHCP on startup (init process via rc.conf). > > > > > > Configured in /etc/src.conf: > > > [... WORKAROUND ...] > > > netwait_enable="NO" > > > netwait_if="em0" > > > [...] > > > > > > and on a regular basis: > > > [...] > > > ifconfig_em0="DHCP" > > > ifconfig_em0_ipv6="inet6 accept_rtadv -ifdisabled nud -no_radr auto_linklocal" > > > [...] > > > > > > Very strange: after a final boot up, its very easy to require and achive an IPv4 with > > > > > > dhclient em0 > > > > > > I'm out of ideas ... > > > > > > > > > > > > > > > > > > ==== > > > pciconf: > > > [...] > > > em0@pci0:0:31:6: class=0x020000 rev=0x21 hdr=0x00 vendor=0x8086 device=0x15d8 > > > subvendor=0x17aa subdevice=0x225a vendor = 'Intel Corporation' > > > device = 'Ethernet Connection (4) I219-V' > > > class = network > > > subclass = ethernet > > > bar [10] = type Memory, range 32, base 0xe8200000, size 131072, enabled > > > cap 01[c8] = powerspec 3 supports D0 D3 current D0 > > > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > > > cap 13[e0] = PCI Advanced Features: FLR TP > > > > > > [...] > > > > > > dmesg: > > > ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xefa0-0xefbf mem > > > 0xe8253000-0xe82530ff at device 31.4 on pci0 em0: <Intel(R) I219-V SPT(4)> mem > > > 0xe8200000-0xe821ffff at device 31.6 on pci0 em0: EEPROM V0.1-3 > > > em0: Using 1024 TX descriptors and 1024 RX descriptors > > > em0: Using an MSI interrupt > > > em0: Ethernet address: 48:2a:e3:3a:cf:52 > > > em0: netmap queues/slots: TX 1/1024, RX 1/1024 > > > > > > > > > > > > > > > > > > > > > > > [-- Attachment #2 --] <html><head></head><body>Ok.<br> <br> Can you copy paste the console output of the booting system up until the login prompt? Or setup /var/log/console.log via /etc/syslog.conf and share that output.<br> <br> Regards,<br> Ronald.<br> <br> <p><strong>Van:</strong> FreeBSD User <freebsd@walstatt-de.de><br> <strong>Datum:</strong> vrijdag, 28 november 2025 10:50<br> <strong>Aan:</strong> Ronald Klop <ronald-lists@klop.ws><br> <strong>CC:</strong> FreeBSD CURRENT <freebsd-current@freebsd.org><br> <strong>Onderwerp:</strong> Re: 15-STABLE: dhclient fails on em0 (Lenovo T580)</p> <blockquote style="padding-right: 0px; padding-left: 5px; margin-left: 5px; border-left: #000000 2px solid; margin-right: 0px"> <div class="MessageRFC822Viewer" id="P"> <div class="TextPlainViewer" id="P.P">On Fri, 28 Nov 2025 10:16:15 +0100 (CET)<br> Ronald Klop <ronald-lists@klop.ws> wrote:<br> <br> > It might be a typo in your mail, but it might also be the cause of your issue.<br> > This config needs to be in /etc/rc.conf, not in /etc/src.conf as you state in your mail.<br> ><br> > Regards,<br> > Ronald.<br> <br> Sorry, a typo.<br> <br> ><br> > <br> > Van: FreeBSD User <freebsd@walstatt-de.de><br> > Datum: vrijdag, 28 november 2025 08:26<br> > Aan: FreeBSD CURRENT <freebsd-current@freebsd.org><br> > Onderwerp: 15-STABLE: dhclient fails on em0 (Lenovo T580)<br> > ><br> > > I recently switched from FreeBSD 14-STABLE to 15-STABLE (after branching of<br> > > 16-CURRENT) on my working laptop, physically a Lenovo T580. Its LAN NIC FreeBSD<br> > > recognizes as em0 (see below). System is at: 15.0-STABLE #16<br> > > stable/15-n281349-b903f27e171b: Fri Nov 28 05:20:32 CET 2025 amd64. Kernel config:<br> > > GENERIC. Configuration has been setup and renewed acording to changes, consider the<br> > > system as a fresh install.<br> > ><br> > > Problem: em0 never gets an IPv4 via DHCP on startup (init process via rc.conf).<br> > ><br> > > Configured in /etc/src.conf:<br> > > [... WORKAROUND ...]<br> > > netwait_enable="NO"<br> > > netwait_if="em0"<br> > > [...]<br> > ><br> > > and on a regular basis:<br> > > [...]<br> > > ifconfig_em0="DHCP"<br> > > ifconfig_em0_ipv6="inet6 accept_rtadv -ifdisabled nud -no_radr auto_linklocal"<br> > > [...]<br> > ><br> > > Very strange: after a final boot up, its very easy to require and achive an IPv4 with<br> > ><br> > > dhclient em0<br> > ><br> > > I'm out of ideas ...<br> > ><br> > ><br> > ><br> > ><br> > ><br> > > ====<br> > > pciconf:<br> > > [...]<br> > > em0@pci0:0:31:6: class=0x020000 rev=0x21 hdr=0x00 vendor=0x8086 device=0x15d8<br> > > subvendor=0x17aa subdevice=0x225a vendor = 'Intel Corporation'<br> > > device = 'Ethernet Connection (4) I219-V'<br> > > class = network<br> > > subclass = ethernet<br> > > bar [10] = type Memory, range 32, base 0xe8200000, size 131072, enabled<br> > > cap 01[c8] = powerspec 3 supports D0 D3 current D0<br> > > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message<br> > > cap 13[e0] = PCI Advanced Features: FLR TP<br> > ><br> > > [...]<br> > ><br> > > dmesg:<br> > > ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xefa0-0xefbf mem<br> > > 0xe8253000-0xe82530ff at device 31.4 on pci0 em0: <Intel(R) I219-V SPT(4)> mem<br> > > 0xe8200000-0xe821ffff at device 31.6 on pci0 em0: EEPROM V0.1-3<br> > > em0: Using 1024 TX descriptors and 1024 RX descriptors<br> > > em0: Using an MSI interrupt<br> > > em0: Ethernet address: 48:2a:e3:3a:cf:52<br> > > em0: netmap queues/slots: TX 1/1024, RX 1/1024<br> > ><br> > > <br> > ><br> > ><br> > > <br> ><br> > <br> </div> <hr></div> </blockquote> <br> </body></html>home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?636185594.3615.1764323768736>