Date: Fri, 8 Jul 2005 15:48:52 +0100 From: Chris Hodgins <christopher.hodgins@gmail.com> To: freebsd-stable@freebsd.org Subject: gmirror, sparc and SCSI problems Message-ID: <63c3899e05070807487e0891de@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi all, Experiencing a few difficulties setting up raid mirroring across two SCSI disks on a sparc based server. Disk da0 contains a working and recent install of FreeBSD 5-4 RELEASE and da1 is blank. We have been following the guidance given in the first part of http://people.freebsd.org/~rse/mirror/ but have hit numerous problems. The first problem is that the system is lacking fdisk. From reading around on various newsgroups, this appears to be due to the sparc architecture. It seems that we can probably miss this step out anyway though although it may be related to our next problem. The next step requires us to run bsdlabel (or in our case sunlabel) on /dev/mirror/gm0s1. In our /dev/mirror directory we only have a single gm0 node so we can't run these steps either. We managed to assemble da1 with the partitions we wanted using sysinstall and had thought that by creating the mirror on da1 it would generate the appropriate gm0a, gm0b...etc. Unfortunately this did not work. Here is the output of sunlabel: # sunlabel -c mirror/gm0 # /dev/mirror/gm0: text: FreeBSD34G cyl 4425 alt 2 hd 255 sec 63 bytes/sectors: 512 sectors/cylinder: 16065 sectors/unit: 71087625 8 partitions: # # Size is in cylinders. # Offset is in cylinders. # size offset # ---------- ---------- b: 262 131 c: 4425 0 d: 131 0 e: 653 393 f: 262 1046 Straight after we ran sysinstall we ran sunlabel -e da1 and added the offset of 16, as you can see from the above output our offset has now gone again. Now this also brings us onto another interesting problem. Our two scsi disks are identical. Same size, manufacturer and part number.=20 However running sunlabel -c on both of them gives very different sizes in regards to cyclinders and sectors: # sunlabel -c da0 # /dev/da0: text: FreeBSD34G cyl 24620 alt 2 hd 27 sec 107 bytes/sectors: 512 sectors/cylinder: 2889 sectors/unit: 71127180 8 partitions: # # Size is in cylinders. # Offset is in cylinders. # size offset # ---------- ---------- a: 726 0 b: 1452 726 c: 24620 0 d: 3630 2178 e: 1452 5808 # sunlabel -c da1 # /dev/da1: text: FreeBSD34G cyl 4425 alt 2 hd 255 sec 63 bytes/sectors: 512 sectors/cylinder: 16065 sectors/unit: 71087625 8 partitions: # # Size is in cylinders. # Offset is in cylinders. # size offset # ---------- ---------- b: 262 131 c: 4425 0 d: 131 0 e: 653 393 f: 262 1046 dmesg shows our disks like this: da0 at sym0 bus 0 target 0 lun 0 da0: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabledda0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) da1 at sym0 bus 0 target 1 lun 0 da1: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabledda1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) dmesg also shows the mirror being completed: GEOM_MIRROR: Device gm0 created (id=3D2793795997). GEOM_MIRROR: Device gm0: provider da1 detected. GEOM_MIRROR: Device gm0: provider da1 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. Does anyone have any information that may help us resolve any of these prob= lems? Many thanks Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?63c3899e05070807487e0891de>