Date: Mon, 11 Jul 2005 14:49:48 +0100 From: Chris Hodgins <christopher.hodgins@gmail.com> To: Johannes Verwijnen <duvin1@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: gmirror, sparc and SCSI problems Message-ID: <63c3899e05071106495d288247@mail.gmail.com> In-Reply-To: <84C3BDA1-5523-4FA7-9832-E82A66D50ADE@gmail.com> References: <63c3899e05070807487e0891de@mail.gmail.com> <20050708233854.GA64117@ratchet.nebcorp.com> <63c3899e05070909363077ca9c@mail.gmail.com> <84C3BDA1-5523-4FA7-9832-E82A66D50ADE@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 7/10/05, Johannes Verwijnen <duvin1@gmail.com> wrote:
> On Jul 9, 2005, at 19:36, Chris Hodgins wrote:
> > It seems that gmirror does not give us any partitions. A listing of
> > the mirror directory shows only the gm0 node even though da0 is
> > partitioned. When mounting the mirror it seems that /dev/mirror/gm0
> > only represents the root partition. How can we get the mirror to
> > recognise the other partitions?
>=20
> I remember (vaguely)) this kind of problem, where when trying to
> mirror a whole disk, you'd only get the first slice. Have you tried
> mirroring the slices (da0s1 etc) separately?
>=20
> --
> duvin
>=20
>=20
Firstly thanks for all the suggestions. We managed to build the
mirrors by using the suggestion above mirroring the slices separately.
Unfortunetly, although the mirrors were created properly the
filesystems are constantly suffering from inconsistencies and fsck
actually appears to be segfaulting.
We have decided not to pursue this any further for the moment, however
we are prepared to allow access to the machine should anyone wish to
try and sort out this incompatibility with gmirror and sparc.=20
Included below is a brief logfile of a reboot after fsck'ing all of
the mirrored partitions.
# reboot
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
No buffers busy after final sync
Uptime: 5m23s
GEOM_MIRROR: Device gm0e: provider mirror/gm0e destroyed.
GEOM_MIRROR: Device gm0e destroyed.
GEOM_MIRROR: Device gm0d: provider mirror/gm0d destroyed.
GEOM_MIRROR: Device gm0d destroyed.
GEOM_MIRROR: Device gm0b: provider mirror/gm0b destroyed.
GEOM_MIRROR: Device gm0b destroyed.
GEOM_MIRROR: Device gm0a: provider mirror/gm0a destroyed.
GEOM_MIRROR: Device gm0a destroyed.
Rebooting...
Resetti
LOM event: +38d+3h37m11s host reset
ng ...
\uffff
Processor Speed =3D 648 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)
Firmware CORE Sun Microsystems, Inc.
@(#) core 1.0.12 2002/01/08 13:00
Software Power ON
Verifying NVRAM...Done
Bootmode is 0
[New I2C DIMM address]
MCR0 =3D 57b2ce06
MCR1 =3D 80008000
MCR2 =3D cf3000ff
MCR3 =3D a00000cf
Ecache Size =3D 512 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=3D0x40000000
MEMSIZE=3D0x20000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (170040 bytes) Done
Orig PC=3D0x1fff0007e44 New PC=3D0xf0f07e9c
Processor Speed=3D648MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom SUNW,lomh
Probing /pci@1,1 Device 3 pmu i2c temperature dimm dimm i2c-nvram
idprom motherboard-fru fan-control
lomp
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #53833010.
Ethernet address 0:3:ba:35:6d:32, Host ID: 83356d32.
Executing last command: boot /pci@1f,0/pci@1/scsi@8/disk@0,0:a
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0:a File and args:
>> FreeBSD/sparc64 boot block
Boot path: /pci@1f,0/pci@1/scsi@8/disk@0,0:a
Boot loader: /boot/loader
Console: Open Firmware console
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root@binkley.cse.buffalo.edu, Sun May 8 07:16:15 UTC 2005)
bootpath=3D"/pci@1f,0/pci@1/scsi@8/disk@0,0:a"
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=3D0x3d8908+0x47c78 syms=3D[0x8+0x50b80+0x8+0x45260=
]
/boot/kernel/geom_mirror.ko text=3D0x21558 data=3D0x5b0+0x18
syms=3D[0x8+0x1638+0x8+0x10da]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
nothing to autoload yet.
jumping to kernel entry at 0xc0040000.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 22:21:34 UTC 2005
root@binkley.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "tick" frequency 648000000 Hz quality 1000
real memory =3D 1073741824 (1024 MB)
avail memory =3D 1025818624 (978 MB)
cpu0: Sun Microsystems UltraSparc-IIe Processor (648.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus3 bridge> mem
0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci1
ebus0: <idprom>: incomplete
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 0
ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver attache=
d)
pci1: <old, non-VGA display device> at device 3.0 (no driver attached)
pci1: <old, non-VGA display device> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0400000-0xe041ffff at
device 12.1 on pci1
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: 2kB RX FIFO, 2kB TX FIFO
gem0: Ethernet address: 00:03:ba:35:6d:32
gem0: if_start running deferred for Giant
pci1: <serial bus, USB> at device 12.3 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port
0x420-0x42f,0x408-0x40b,0x410-0x417,0x418-0x41b,0x400-0x407 at device
13.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
gem1: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0440000-0xe045ffff at
device 5.1 on pci1miibus1: <MII bus> on gem1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem1: 2kB RX FIFO, 2kB TX FIFO
gem1: Ethernet address: 00:03:ba:35:6d:32
gem1: if_start running deferred for Giant
pci1: <serial bus, USB> at device 5.3 (no driver attached)
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
sym0: <896> port 0xc00000-0xc000ff mem 0x4000-0x5fff,0x2000-0x23ff at
device 8.0 on pci2
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <896> port 0xc00100-0xc001ff mem 0x8000-0x9fff,0x6000-0x63ff at
device 8.1 on pci2
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 4 on isa0
Timecounters tick every 10.000 msec
acd0: CDRW <CD-224E/P.9A> at ata2-master PIO4
Waiting 15 seconds for SCSI devices to settle
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11 ascq=3D0x00 error=3D4<ABOR=
TED>
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11 ascq=3D0x00 error=3D4<ABOR=
TED>
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing En=
abled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing En=
abled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
GEOM_MIRROR: Device gm0a created (id=3D4086462658).
GEOM_MIRROR: Device gm0a: provider da0a detected.
GEOM_MIRROR: Device gm0b created (id=3D119591469).
GEOM_MIRROR: Device gm0b: provider da0b detected.
GEOM_MIRROR: Device gm0d created (id=3D701152197).
GEOM_MIRROR: Device gm0d: provider da0d detected.
GEOM_MIRROR: Device gm0e created (id=3D2934901561).
GEOM_MIRROR: Device gm0e: provider da0e detected.
GEOM_MIRROR: Device gm0a: provider da1a detected.
GEOM_MIRROR: Device gm0a: provider da1a activated.
GEOM_MIRROR: Device gm0b: provider da1b detected.
GEOM_MIRROR: Device gm0a: provider da0a activated.
GEOM_MIRROR: Device gm0a: provider mirror/gm0a launched.
GEOM_MIRROR: Device gm0b: provider da1b activated.
GEOM_MIRROR: Device gm0b: provider da0b activated.
GEOM_MIRROR: Device gm0b: provider mirror/gm0b launched.
GEOM_MIRROR: Device gm0d: provider da1d detected.
GEOM_MIRROR: Device gm0d: provider da1d activated.
GEOM_MIRROR: Device gm0e: provider da1e detected.
GEOM_MIRROR: Device gm0d: provider da0d activated.
GEOM_MIRROR: Device gm0d: provider mirror/gm0d launched.
GEOM_MIRROR: Device gm0e: provider da1e activated.
GEOM_MIRROR: Device gm0e: provider da0e activated.
GEOM_MIRROR: Device gm0e: provider mirror/gm0e launched.
Mounting root from ufs:/dev/mirror/gm0a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/mirror/gm0b as swap device
Starting file system checks:
/dev/mirror/gm0a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mirror/gm0a: clean, 487361 free (1001 frags, 60795 blocks, 0.2%
fragmentation)
/dev/mirror/gm0d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mirror/gm0d: clean, 2363343 free (14703 frags, 293580 blocks,
0.6% fragmentation)
/dev/mirror/gm0e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mirror/gm0e: clean, 1012436 free (100 frags, 126542 blocks, 0.0%
fragmentation)
mode =3D 0100644, inum =3D 188424, fs =3D /var
panic: ffs_valloc: dup alloc
cpuid =3D 0
Uptime: 25s
GEOM_MIRROR: Device gm0e: provider mirror/gm0e destroyed.
GEOM_MIRROR: Device gm0e destroyed.
GEOM_MIRROR: Device gm0d: provider mirror/gm0d destroyed.
GEOM_MIRROR: Device gm0d destroyed.
GEOM_MIRROR: Device gm0b: provider mirror/gm0b destroyed.
GEOM_MIRROR: Device gm0b destroyed.
GEOM_MIRROR: Device gm0a: provider mirror/gm0a destroyed.
GEOM_MIRROR: Device gm0a destroyed.
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Resetti
LOM event: +38d+3h38m51s host reset
ng ...
\uffff
Processor Speed =3D 648 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)
Firmware CORE Sun Microsystems, Inc.
@(#) core 1.0.12 2002/01/08 13:00
Software Power ON
Verifying NVRAM...Done
Bootmode is 0
[New I2C DIMM address]
MCR0 =3D 57b2ce06
MCR1 =3D 80008000
MCR2 =3D cf3000ff
MCR3 =3D a00000cf
Ecache Size =3D 512 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=3D0x40000000
MEMSIZE=3D0x20000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (170040 bytes) Done
Orig PC=3D0x1fff0007e44 New PC=3D0xf0f07e9c
Processor Speed=3D648MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom SUNW,lomh
Probing /pci@1,1 Device 3 pmu i2c temperature dimm dimm i2c-nvram
idprom motherboard-fru fan-control
lomp
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #53833010.
Ethernet address 0:3:ba:35:6d:32, Host ID: 83356d32.
Executing last command: boot /pci@1f,0/pci@1/scsi@8/disk@0,0:a
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0:a File and args:
>> FreeBSD/sparc64 boot block
Boot path: /pci@1f,0/pci@1/scsi@8/disk@0,0:a
Boot loader: /boot/loader
Console: Open Firmware console
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root@binkley.cse.buffalo.edu, Sun May 8 07:16:15 UTC 2005)
bootpath=3D"/pci@1f,0/pci@1/scsi@8/disk@0,0:a"
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=3D0x3d8908+0x47c78 syms=3D[0x8+0x50b80+0x8+0x45260=
]
/boot/kernel/geom_mirror.ko text=3D0x21558 data=3D0x5b0+0x18
syms=3D[0x8+0x1638+0x8+0x10da]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
nothing to autoload yet.
jumping to kernel entry at 0xc0040000.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 22:21:34 UTC 2005
root@binkley.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "tick" frequency 648000000 Hz quality 1000
real memory =3D 1073741824 (1024 MB)
avail memory =3D 1025818624 (978 MB)
cpu0: Sun Microsystems UltraSparc-IIe Processor (648.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus3 bridge> mem
0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci1
ebus0: <idprom>: incomplete
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 0
ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver attache=
d)
pci1: <old, non-VGA display device> at device 3.0 (no driver attached)
pci1: <old, non-VGA display device> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0400000-0xe041ffff at
device 12.1 on pci1
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: 2kB RX FIFO, 2kB TX FIFO
gem0: Ethernet address: 00:03:ba:35:6d:32
gem0: if_start running deferred for Giant
pci1: <serial bus, USB> at device 12.3 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port
0x420-0x42f,0x408-0x40b,0x410-0x417,0x418-0x41b,0x400-0x407 at device
13.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
gem1: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0440000-0xe045ffff at
device 5.1 on pci1miibus1: <MII bus> on gem1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem1: 2kB RX FIFO, 2kB TX FIFO
gem1: Ethernet address: 00:03:ba:35:6d:32
gem1: if_start running deferred for Giant
pci1: <serial bus, USB> at device 5.3 (no driver attached)
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
sym0: <896> port 0xc00000-0xc000ff mem 0x4000-0x5fff,0x2000-0x23ff at
device 8.0 on pci2
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <896> port 0xc00100-0xc001ff mem 0x8000-0x9fff,0x6000-0x63ff at
device 8.1 on pci2
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 4 on isa0
Timecounters tick every 10.000 msec
acd0: CDRW <CD-224E/P.9A> at ata2-master PIO4
Waiting 15 seconds for SCSI devices to settle
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11 ascq=3D0x00 error=3D4<ABOR=
TED>
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11 ascq=3D0x00 error=3D4<ABOR=
TED>
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing En=
abled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing En=
abled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
GEOM_MIRROR: Device gm0a created (id=3D4086462658).
GEOM_MIRROR: Device gm0a: provider da0a detected.
GEOM_MIRROR: Device gm0b created (id=3D119591469).
GEOM_MIRROR: Device gm0b: provider da0b detected.
GEOM_MIRROR: Device gm0d created (id=3D701152197).
GEOM_MIRROR: Device gm0d: provider da0d detected.
GEOM_MIRROR: Device gm0e created (id=3D2934901561).
GEOM_MIRROR: Device gm0e: provider da0e detected.
GEOM_MIRROR: Device gm0a: provider da1a detected.
GEOM_MIRROR: Device gm0a: provider da1a activated.
GEOM_MIRROR: Device gm0b: provider da1b detected.
GEOM_MIRROR: Device gm0a: provider da0a activated.
GEOM_MIRROR: Device gm0a: provider mirror/gm0a launched.
GEOM_MIRROR: Device gm0b: provider da1b activated.
GEOM_MIRROR: Device gm0b: provider da0b activated.
GEOM_MIRROR: Device gm0b: provider mirror/gm0b launched.
GEOM_MIRROR: Device gm0d: provider da1d detected.
GEOM_MIRROR: Device gm0d: provider da1d activated.
GEOM_MIRROR: Device gm0e: provider da1e detected.
GEOM_MIRROR: Device gm0d: provider da0d activated.
GEOM_MIRROR: Device gm0d: provider mirror/gm0d launched.
GEOM_MIRROR: Device gm0e: provider da1e activated.
GEOM_MIRROR: Device gm0e: provider da0e activated.
GEOM_MIRROR: Device gm0e: provider mirror/gm0e launched.
Mounting root from ufs:/dev/mirror/gm0a
WARNING: / was not properly dismounted
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/mirror/gm0b as swap device
Starting file system checks:
/dev/mirror/gm0a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/mirror/gm0a: SUMMARY INFORMATION BAD (SALVAGED)
/dev/mirror/gm0a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/mirror/gm0a: 846 files, 19190 used, 487362 free (1002 fragpid 86
(fsck), uid 0: exited on signal 11
s, 60795 blocks, 0.2% fragmentation)
/dev/da0d: DEFER FOR BACKGROUND CHECKING
/dev/da0e: DEFER FOR BACKGROUND CHECKING
Segmentation fault
Unknown error; help!
Enter full pathname of shell or RETURN for /bin/sh:=20
Thanks
Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?63c3899e05071106495d288247>