Date: Thu, 16 Oct 2008 12:51:04 +0200 From: Goran Lowkrantz <goran.lowkrantz@ismobile.com> To: "Andrey V. Elsukov" <bu7cher@yandex.ru> Cc: kib@freebsd.org, Jeremy Chadwick <koitsu@FreeBSD.org>, freebsd-stable@freebsd.org, sos@freebsd.org Subject: Re: Request for testing: ata(4) MFC Message-ID: <6F718A085226A4D60C92BD5A@syn> In-Reply-To: <836B8A264C59B67CC07EB80D@syn> References: <676151223134689@webmail38.yandex.ru> <20081005004808.GA70137@icarus.home.lan> <48E99C18.6070602@yandex.ru> <20081006051211.GA10542@icarus.home.lan> <20081010115855.GA31707@icarus.home.lan> <20081016071700.GA2793@icarus.home.lan> <48F70642.7080701@yandex.ru> <836B8A264C59B67CC07EB80D@syn>
next in thread | previous in thread | raw e-mail | index | archive | help
--==========CCE29D9EAE006DE1BB3D========== Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline It seems the attachment got eaten somewhere. Trying again with correct=20 content type. /glz --On October 16, 2008 12:20:27 +0200 Goran Lowkrantz=20 <goran.lowkrantz@ismobile.com> wrote: > Ok, I was not sure if this was a "No news is good news" request. > > Attached are the lspci:s of the MB and devices I have had the pleasure of > testing. I have found nothing bad on these once but please remember that > I had to hack the nVidia MCP67-A1 to have it accepted as a SATA and AHCI > controller. > > All controllers have had large copy in/out, backups at file-system level > via dump/zfs snapshot and tar and all have had bonny++ tests done. > > On AHCI controllers, I have at least remove and re-inserted one disk of a > zpool. > > Cheers, > G=F6ran > > Best regards, > G=F6ran L > > --On October 16, 2008 13:15:46 +0400 "Andrey V. Elsukov" > <bu7cher@yandex.ru> wrote: > >> Jeremy Chadwick wrote: >>> - Could someone provide an explanation of the 48-bit LBA addressing >>> changes (see lines 988-1003 in the patch)? I'd like to know what = they >>> do, and if further QA/testing is needed with this. >> >> I think this is for debug purposes. >> >>> - Can we please see about adding the FreeNAS project's ata timeout >>> sysctls? I see lots of delays/sleeps in numerous pieces of code that >>> pertain to soft or hard resets of AHCI controllers, and I often worry >>> about the implications of hard-coded timeouts. >>> >>> = http://freenas.svn.sourceforge.net/viewvc/freenas/trunk/build/kernel-p >>> atches/ata/files/patch-ata.diff?view=3Dmarkup >> >> As i remember changes in FreeNAS don't change timeouts for resets. >> In any case, these changes can not be in 7.1-RELEASE. My patch >> targeted to move changes from CURRENT to 7.1. But it seems there >> are too few testers and patch can not be commited. >> >> -- >> WBR, Andrey V. Elsukov >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to = "freebsd-stable-unsubscribe@freebsd.org" > > > > ................................................... the future isMobile > > Goran Lowkrantz <goran.lowkrantz@ismobile.com> > System Architect, isMobile AB > Sandviksgatan 81, PO Box 58, S-971 03 Lule=E5, Sweden > Mobile: +46(0)70-587 87 82 > http://www.ismobile.com ............................................... ................................................... the future isMobile Goran Lowkrantz <goran.lowkrantz@ismobile.com> System Architect, isMobile AB Sandviksgatan 81, PO Box 58, S-971 03 Lule=E5, Sweden Mobile: +46(0)70-587 87 82 http://www.ismobile.com ............................................... --==========CCE29D9EAE006DE1BB3D========== Content-Type: text/plain; charset=utf-8; name="ata.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="ata.txt"; size=11496 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D MB: Intel D915GAV 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 = Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Unknown device [8086:4156] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- = <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at ffa0 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) = SATA Controller [8086:2651] (rev 03) (prog-if 8f [Master SecP SecO PriP = PriO]) Subsystem: Intel Corporation Unknown device [8086:4156] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- = <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at e800 Region 1: I/O ports at e400 Region 2: I/O ports at e000 Region 3: I/O ports at dc00 Region 4: I/O ports at d800 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 06:00.0 SCSI storage controller [0100]: Adaptec AHA-2940U/UW/D / AIC-7881U = [9004:8178] (rev 01) Subsystem: Adaptec AHA-2940UW SCSI Host Adapter [9004:7881] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- = Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- = <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 2000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at b800 Region 1: Memory at ff590000 (32-bit, non-prefetchable) [disabled] Expansion ROM at ff580000 [disabled] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 06:03.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 = [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02) Subsystem: Silicon Image, Inc. Unknown device [1095:7114] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- = <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at b000 Region 1: I/O ports at ac00 Region 2: I/O ports at a800 Region 3: I/O ports at a400 Region 4: I/O ports at a000 Region 5: Memory at ff591000 (32-bit, non-prefetchable) Expansion ROM at ff500000 [disabled] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D2 PME- =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D MB: GIGABYTE GA-MA78G-DS3H 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA = Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Unknown device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 Region 1: I/O ports at fe00 Region 2: I/O ports at fd00 Region 3: I/O ports at fc00 Region 4: I/O ports at fb00 Region 5: Memory at fe02f000 (32-bit, non-prefetchable) Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=3D0/2 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] SATA HBA <?> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE = Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Unknown device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at fa00 Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 = Enable- Address: 00000000 Data: 0000 02:00.0 SCSI storage controller [0100]: HighPoint Technologies, Inc. = RocketRAID 2310 4 Port SATA-II Controller [1103:2310] (rev 02) Subsystem: Marvell Technology Group Ltd. Unknown device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbort- = <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fde00000 (64-bit, non-prefetchable) Region 2: I/O ports at ee00 Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=3D0/0 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <256ns, L1 = unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- = ABWMgmt- 04:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3132 Serial = ATA Raid II Controller [1095:3132] (rev 01) Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller = [1095:3132] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbort- = <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fdaff000 (64-bit, non-prefetchable) Region 2: Memory at fdaf8000 (64-bit, non-prefetchable) Region 4: I/O ports at cf00 Capabilities: [54] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D1 PME- Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=3D0/0 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, = L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- = ABWMgmt- 05:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3132 Serial = ATA Raid II Controller [1095:3132] (rev 01) Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller = [1095:3132] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbort- = <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fd8ff000 (64-bit, non-prefetchable) Region 2: Memory at fd8f8000 (64-bit, non-prefetchable) Region 4: I/O ports at bf00 Capabilities: [54] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D1 PME- Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=3D0/0 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, = L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- = ABWMgmt- =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D MB: Asus M2N-VM DVI Plus patch for MCP67 A1 00:06.0 IDE interface [0101]: nVidia Corporation MCP67 IDE Controller = [10de:0560] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82b3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- <TAbort- = <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at ffa0 Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 00:09.0 SATA controller [0106]: nVidia Corporation MCP67 AHCI Controller = [10de:0554] (rev a2) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82b3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- <TAbort- = <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c480 Region 1: I/O ports at c400 Region 2: I/O ports at c080 Region 3: I/O ports at c000 Region 4: I/O ports at bc00 Region 5: Memory at f9ef6000 (32-bit, non-prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [8c] SATA HBA <?> --==========CCE29D9EAE006DE1BB3D==========--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6F718A085226A4D60C92BD5A>